Qt5.5.1基于mips64的交叉编译

0 环境准备

导出交叉编译环境

#!/bin/sh
set -x
CC_PREFIX=/home/xuchenghua/toolchain/cross-tools/cross-gcc-4.9.3-n64-loongson-rc6.1

export PATH=$CC_PREFIX/usr/bin:$PATH
export LD_LIBRARY_PATH=$CC_PREFIX/usr/lib:$LD_LIBRARY_PATH
export LD_LIBRARY_PATH=$CC_PREFIX/usr/x86_64-unknown-linux-gnu/mips64el-loongson-linux/lib/:$LD_LIBRARY_PATH
set +x

Qt5.5.1 编译

配置mkspecs

由于mkspecs目录下没有基于mips的配置项，故而执行以下命令，产生一组配置文件

cd mkspecs
cp -r  linux-arm-gnueabi-g++   linux-mips-g++

进入linux-mips-g++目录中，修改qmake.conf如下：

#
# qmake configuration for building with arm-linux-gnueabi-g++
#

MAKEFILE_GENERATOR      = UNIX
CONFIG                 += incremental
QMAKE_INCREMENTAL_STYLE = sublib

QMAKE_CLFAGS += -mabi=64
QMAKE_CXXLFAGS += -mabi=64
CFLAGS += -mabi=64
CXXFLAGS += -mabi=64

include(../common/linux.conf)
include(../common/gcc-base-unix.conf)
include(../common/g++-unix.conf)

# 以下四个根据实际情况进行修改
QMAKE_INCDIR_X11        =/home/xuchenghua/loongson_jari_rootfs/usr/include
QMAKE_LIBDIR_X11        =/home/xuchenghua/loongson_jari_rootfs/usr/lib
QMAKE_INCDIR_OPENGL     =/home/xuchenghua/loongson_jari_rootfs/usr/include
QMAKE_LIBDIR_OPENGL     =/home/xuchenghua/loongson_jari_rootfs/usr/lib

# modifications to g++.conf
QMAKE_CC                = mips64el-loongson-linux-gcc
QMAKE_CXX               = mips64el-loongson-linux-g++
QMAKE_LINK              = mips64el-loongson-linux-g++
QMAKE_LINK_SHLIB        = mips64el-loongson-linux-g++

# modifications to linux.conf
QMAKE_AR                = mips64el-loongson-linux-ar cqs
QMAKE_OBJCOPY           = mips64el-loongson-linux-objcopy
QMAKE_NM                = mips64el-loongson-linux-nm -P
QMAKE_STRIP             = mips64el-loongson-linux-strip
load(qt_config)

configure配置

使用脚本如下：

#!/bin/sh
./configure \
-v \
-opensource \
-confirm-license \
-shared \
-release \
-xplatform linux-mips-g++ \
-prefix /opt/qt5.5.1_ljm \
-opensource \
-c++11 \
-make libs \
-opengl es2 \
-qt-xcb \
-nomake examples \
-nomake tests \
-sysroot /home/xuchenghua/loongson_jari_rootfs

exit