OpenWRT编译用于高通AR9561(2)

 1.  Tftp将软件升级到板子上（绿色字体为升级命令）

U-Boot1.1.4-dirty (Apr 18 2016 - 20:41:39)

ap151 -Dragonfly 1.0DRAM: 

sri

ath_ddr_initial_config(278):(ddr2 init)

ath_sys_frequency:cpu 775 ddr 650 ahb 258

Tapvalues = (0xf, 0xf, 0xf, 0xf)

128 MB

Top ofRAM usable for U-Boot at: 88000000

Reserving199k for U-Boot at: 87fcc000

Reserving192k for malloc() at: 87f9c000

Reserving44 Bytes for Board Info at: 87f9bfd4

Reserving36 Bytes for Global Data at: 87f9bfb0

Reserving128k for boot params() at: 87f7bfb0

StackPointer at: 87f7bf98

Nowrunning in RAM - U-Boot at: 87fcc000

FlashManuf Id 0xc8, DeviceId0 0x40, DeviceId1 0x17

flashsize 8MB, sector count = 128

Flash:  8 MB

***Warning - bad CRC, using default environment

 

***Warning *** : PCIe WLAN Module not found !!!

In:    serial

Out:   serial

Err:   serial

Net:   ath_gmac_enet_initialize...

No validaddress in Flash. Using fixed address

No validaddress in Flash. Using fixed address

ath_gmac_enet_initialize:reset mask:c02200

Dragonfly---->S27 PHY *

: cfg10x80000000 cfg2 0x7114

eth0:00:03:7f:09:0b:ad

athrs27_phy_setupATHR_PHY_CONTROL 4 :1000

athrs27_phy_setupATHR_PHY_SPEC_STAUS 4 :10

eth0 up

ATHRS27:resetting s27

ATHRS27:s27 reset done

: cfg10x800c0000 cfg2 0x7214

eth1:00:03:7f:09:0b:ad

athrs27_phy_setupATHR_PHY_CONTROL 0 :1000

athrs27_phy_setupATHR_PHY_SPEC_STAUS 0 :10

athrs27_phy_setupATHR_PHY_CONTROL 1 :1000

athrs27_phy_setupATHR_PHY_SPEC_STAUS 1 :10

athrs27_phy_setupATHR_PHY_CONTROL 2 :1000

athrs27_phy_setupATHR_PHY_SPEC_STAUS 2 :10

athrs27_phy_setupATHR_PHY_CONTROL 3 :1000

athrs27_phy_setupATHR_PHY_SPEC_STAUS 3 :10

eth1 up

eth0,eth1

Setting0x181162c0 to 0x80

Hit anykey to stop autoboot:  0

ath>

ath>tftp 0x80060000 openwrt-ar71xx-ap151-8M-qca-legacy-uboot.bin

Tryingeth0

eth0 linkdown

FAIL

Tryingeth1

enet1port0 up

dup 1speed 1000

Usingeth1 device

TFTP fromserver 192.168.1.10; our IP address is 192.168.1.1

Filename'openwrt-ar71xx-ap151-8M-qca-legacy-uboot.bin'.

Loadaddress: 0x80060000

Loading:#################################

done

Bytestransferred = 166892 (28bec hex)

ath> erase 0x9f000000 +0x28bec

Erasingflash...

First 0x0last 0x2 sector size 0x10000

   2

Erased 3sectors

ath> cp.b 0x80060000 0x9f000000 0x28bec

Copy toFlash... write addr: 9f000000

done

ath>tftp 0x80060000 openwrt-ar71xx-generic-ap151-8M-kernel.bin

Tryingeth0

eth0 linkdown

FAIL

Tryingeth1

Usingeth1 device

TFTP fromserver 192.168.1.10; our IP address is 192.168.1.1

Filename'openwrt-ar71xx-generic-ap151-8M-kernel.bin'.

Loadaddress: 0x80060000

Loading:#################################################################

        #################################################################

        #################################################################

done

Bytestransferred = 1114112 (110000 hex)

ath>erase 0x9f680000 +0x110000

Erasingflash...

First0x68 last 0x78 sector size 0x10000

 120

Erased 17sectors

ath>cp.b 0x80060000 0x9f680000 0x110000

Copy toFlash... write addr: 9f680000

done

ath> tftp 0x80060000openwrt-ar71xx-generic-ap151-8M-rootfs-squashfs.bin

Tryingeth0

eth0 linkdown

FAIL

Tryingeth1

Usingeth1 device

TFTP fromserver 192.168.1.10; our IP address is 192.168.1.1

Filename'openwrt-ar71xx-generic-ap151-8M-rootfs-squashfs.bin'.

Loadaddress: 0x80060000

Loading:#################################################################

        #################################################################

        #################################################################

        #################################################################

done

Bytestransferred = 6422528 (620000 hex)

ath> erase 0x9f050000 +0x620000

Erasingflash...

First 0x5last 0x66 sector size 0x10000

 102

Erased 98sectors

ath> cp.b 0x800600000x9f050000 0x620000

Copy toFlash... write addr: 9f050000

Done

 

2.  重启设备

U-Boot1.1.4-dirty (Apr 18 2016 - 20:41:39)

ap151 -Dragonfly 1.0DRAM: 

sri

ath_ddr_initial_config(278):(ddr2 init)

ath_sys_frequency:cpu 775 ddr 650 ahb 258

Tapvalues = (0xf, 0xf, 0xf, 0xf)

128 MB

Top ofRAM usable for U-Boot at: 88000000

Reserving199k for U-Boot at: 87fcc000

Reserving192k for malloc() at: 87f9c000

Reserving44 Bytes for Board Info at: 87f9bfd4

Reserving36 Bytes for Global Data at: 87f9bfb0

Reserving128k for boot params() at: 87f7bfb0

StackPointer at: 87f7bf98

Now runningin RAM - U-Boot at: 87fcc000

FlashManuf Id 0xc8, DeviceId0 0x40, DeviceId1 0x17

flashsize 8MB, sector count = 128

Flash:  8 MB

***Warning - bad CRC, using default environment

 

***Warning *** : PCIe WLAN Module not found !!!

In:    serial

Out:   serial

Err:   serial

Net:   ath_gmac_enet_initialize...

No validaddress in Flash. Using fixed address

No validaddress in Flash. Using fixed address

ath_gmac_enet_initialize:reset mask:c02200

Dragonfly---->S27 PHY *

: cfg10x80000000 cfg2 0x7114

eth0: 00:03:7f:09:0b:ad

athrs27_phy_setupATHR_PHY_CONTROL 4 :1000

athrs27_phy_setupATHR_PHY_SPEC_STAUS 4 :10

eth0 up

ATHRS27:resetting s27

ATHRS27:s27 reset done

: cfg10x800c0000 cfg2 0x7214

eth1:00:03:7f:09:0b:ad

athrs27_phy_setupATHR_PHY_CONTROL 0 :1000

athrs27_phy_setupATHR_PHY_SPEC_STAUS 0 :10

athrs27_phy_setupATHR_PHY_CONTROL 1 :1000

athrs27_phy_setupATHR_PHY_SPEC_STAUS 1 :10

athrs27_phy_setupATHR_PHY_CONTROL 2 :1000

athrs27_phy_setupATHR_PHY_SPEC_STAUS 2 :10

athrs27_phy_setupATHR_PHY_CONTROL 3 :1000

athrs27_phy_setupATHR_PHY_SPEC_STAUS 3 :10

eth1 up

eth0,eth1

Setting0x181162c0 to 0x80

Hit anykey to stop autoboot:  0

##Booting image at 9f680000 ...

   Image Name:  MIPS OpenWrt Linux-3.3.8

   Created:     2016-05-17   6:29:33 UTC

   Image Type:  MIPS Linux Multi-File Image (lzma compressed)

   Data Size:   1090209 Bytes =  1 MB

   Load Address: 80060000

   Entry Point: 80060000

   Contents:

   Image 0: 1090201 Bytes =  1 MB

   Verifying Checksum at 0x9f680040 ...OK

   Uncompressing Multi-File Image ... OK

No initrd

##Transferring control to Linux (at address 80060000) ...

## Givinglinux memsize in bytes, 134217728

 

Startingkernel ..