本文详细介绍了Zookeeper中Follower和Leader节点的状态同步过程，包括选举结束后节点角色的更新，Follower如何查找并连接Leader，两者之间通过网络进行状态信息交换，数据同步策略（DIFF、TRUNC、SNAP）的执行，以及在整个过程中涉及的关键源码解析。
18、Follower 和 Leader 状态同步源码
当选举结束后，每个节点都需要根据自己的角色更新自己的状态。选举出的 Leader 更新自己状态为 Leader，其他节点更新自己状态为Follower。
Leader 更新状态入口：leader.lead()
Follower 更新状态入口：follower.followerLeader()
注意：
（1）follower 必须要让 leader 知道自己的状态：epoch、zxid、sid
- 必须要找出谁是 leader；
- 发起请求连接 leader；
- 发送自己的信息给 leader；
- leader 接收到信息，必须要返回对应的信息给 follower。
（2）当leader得知follower的状态了，就确定需要做何种方式的数据同步DIFF、TRUNC、SNAP
（3）执行数据同步
（4）当 leader 接收到超过半数 follower 的 ack 之后，进入正常工作状态，集群启动完成了
最终数据总结同步的方式：
- DIFF 咱两一样，不需要做什么
- TRUNC follower 的 zxid 比 leader 的 zxid 大，所以 Follower 要回滚
- COMMIT leader 的 zxid 比 follower 的 zxid 大，发送 Proposal 给 foloower 提交执行
- SNAP 如果 follower 并没有任何数据，直接使用 SNAP 的方式来执行数据同步（直接把数据全部序列到 follower）
18.1、Follower和Leader状态同步源码解析图解
18.2、Follower和Leader状态同步源码解析流程图
18.2.1、Leader.lead()等待接收 follower 的状态同步申请
Leader.lead()
void lead() throws IOException, InterruptedException {
self.end_fle = Time.currentElapsedTime();
long electionTimeTaken = self.end_fle - self.start_fle;
self.setElectionTimeTaken(electionTimeTaken);
LOG.info("LEADING - LEADER ELECTION TOOK - {} {}", electionTimeTaken,
QuorumPeer.FLE_TIME_UNIT);
self.start_fle = 0;
self.end_fle = 0;
zk.registerJMX(new LeaderBean(this, zk), self.jmxLocalPeerBean);
try {
self.tick.set(0);
// 恢复数据到内存，启动时，其实已经加载过了
zk.loadData();
leaderStateSummary = new StateSummary(self.getCurrentEpoch(), zk.getLastProcessedZxid());
// Start thread that waits for connection requests from
// new followers.
// 等待其他 follower 节点向 leader 节点发送同步状态
cnxAcceptor = new LearnerCnxAcceptor();
cnxAcceptor.start();
long epoch = getEpochToPropose(self.getId(), self.getAcceptedEpoch());
zk.setZxid(ZxidUtils.makeZxid(epoch, 0));
synchronized(this){
lastProposed = zk.getZxid();
}
......
} finally {
zk.unregisterJMX(this);
}
}
LearnerCnxAcceptor
public void run() {
try {
while (!stop) {
Socket s = null;
boolean error = false;
try {
// 等待接收 follower 的状态同步申请
s = ss.accept();
// start with the initLimit, once the ack is processed
// in LearnerHandler switch to the syncLimit
s.setSoTimeout(self.tickTime * self.initLimit);
s.setTcpNoDelay(nodelay);
BufferedInputStream is = new BufferedInputStream(
s.getInputStream());
// 一旦接收到 follower 的请求，就创建 LearnerHandler 对象，处理请求
LearnerHandler fh = new LearnerHandler(s, is, Leader.this);
// 启动线程
fh.start();
} catch (SocketException e) {
......
} catch (Exception e) {
LOG.warn("Exception while accepting follower", e.getMessage());
handleException(this.getName(), e);
}
}
其中 ss 的初始化是在创建 Leader 对象时，创建的 socket
Leader(QuorumPeer self,LeaderZooKeeperServer zk) throws IOException {
this.self = self;
this.proposalStats = new BufferStats();
try {
if (self.shouldUsePortUnification() || self.isSslQuorum()) {
boolean allowInsecureConnection = self.shouldUsePortUnification();
if (self.getQuorumListenOnAllIPs()) {
ss = new UnifiedServerSocket(self.getX509Util(), allowInsecureConnection, self.getQuorumAddress().getPort());
} else {
ss = new UnifiedServerSocket(self.getX509Util(), allowInsecureConnection);
}
} else {
if (self.getQuorumListenOnAllIPs()) {
ss = new ServerSocket(self.getQuorumAddress().getPort());
} else {
ss = new ServerSocket();
}
}
ss.setReuseAddress(true);
if (!self.getQuorumListenOnAllIPs()) {
ss.bind(self.getQuorumAddress());
}
} catch (BindException e) {
......
}
this.zk = zk;
this.learnerSnapshotThrottler = createLearnerSnapshotThrottler(
maxConcurrentSnapshots, maxConcurrentSnapshotTimeout);
}
18.2.2、Follower.followLeader()查找并连接 Leader
void followLeader() throws InterruptedException {
self.end_fle = Time.currentElapsedTime();
long electionTimeTaken = self.end_fle - self.start_fle;
self.setElectionTimeTaken(electionTimeTaken);
LOG.info("FOLLOWING - LEADER ELECTION TOOK - {} {}", electionTimeTaken,
QuorumPeer.FLE_TIME_UNIT);
self.start_fle = 0;
self.end_fle = 0;
fzk.registerJMX(new FollowerBean(this, zk), self.jmxLocalPeerBean);
try {
// 查找 leader
QuorumServer leaderServer = findLeader();
try {
// 连接 leader
connectToLeader(leaderServer.addr, leaderServer.hostname);
// 向 leader 注册
long newEpochZxid = registerWithLeader(Leader.FOLLOWERINFO);
if (self.isReconfigStateChange())
throw new Exception("learned about role change");
//check to see if the leader zxid is lower than ours
//this should never happen but is just a safety check
long newEpoch = ZxidUtils.getEpochFromZxid(newEpochZxid);
if (newEpoch < self.getAcceptedEpoch()) {
LOG.error("Proposed leader epoch " + ZxidUtils.zxidToString(newEpochZxid)
+ " is less than our accepted epoch " + ZxidUtils.zxidToString(self.getAcceptedEpoch()));
throw new IOException("Error: Epoch of leader is lower");
}
syncWithLeader(newEpochZxid);
QuorumPacket qp = new QuorumPacket();
while (this.isRunning()) {
readPacket(qp);
processPacket(qp);
}
} catch (Exception e) {
LOG.warn("Exception when following the leader", e);
try {
sock.close();
} catch (IOException e1) {
e1.printStackTrace();
}
// clear pending revalidations
pendingRevalidations.clear();
}
} finally {
zk.unregisterJMX((Learner)this);
}
}
findLeader()
protected QuorumServer findLeader() {
QuorumServer leaderServer = null;
// Find the leader by id
// 选举投票的时候记录的，最后推荐的 leader 的 sid
Vote current = self.getCurrentVote();
// 如果这个 sid 在启动的所有服务器范围中
for (QuorumServer s : self.getView().values()) {
if (s.id == current.getId()) {
// Ensure we have the leader's correct IP address before
// attempting to connect.
// 尝试连接 leader 的正确 IP 地址
s.recreateSocketAddresses();
leaderServer = s;
break;
}
}
if (leaderServer == null) {
LOG.warn("Couldn't find the leader with id = "
+ current.getId());
}
return leaderServer;
}
connectToLeader(leaderServer.addr, leaderServer.hostname)
protected void connectToLeader(InetSocketAddress addr, String hostname)
throws IOException, InterruptedException, X509Exception {
this.sock = createSocket();
int initLimitTime = self.tickTime * self.initLimit;
int remainingInitLimitTime = initLimitTime;
long startNanoTime = nanoTime();
for (int tries = 0; tries < 5; tries++) {
try {
// recalculate the init limit time because retries sleep for 1000 milliseconds
remainingInitLimitTime = initLimitTime - (int)((nanoTime() - startNanoTime) / 1000000);
if (remainingInitLimitTime <= 0) {
LOG.error("initLimit exceeded on retries.");
throw new IOException("initLimit exceeded on retries.");
}
sockConnect(sock, addr, Math.min(self.tickTime * self.syncLimit, remainingInitLimitTime));
if (self.isSslQuorum()) {
((SSLSocket) sock).startHandshake();
}
sock.setTcpNoDelay(nodelay);
break;
} catch (IOException e) {
remainingInitLimitTime = initLimitTime - (int)((nanoTime() - startNanoTime) / 1000000);
if (remainingInitLimitTime <= 1000) {
LOG.error("Unexpected exception, initLimit exceeded. tries=" + tries +
", remaining init limit=" + remainingInitLimitTime +
", connecting to " + addr,e);
throw e;
} else if (tries >= 4) {
LOG.error("Unexpected exception, retries exceeded. tries=" + tries +
", remaining init limit=" + remainingInitLimitTime +
", connecting to " + addr,e);
throw e;
} else {
LOG.warn("Unexpected exception, tries=" + tries +
", remaining init limit=" + remainingInitLimitTime +
", connecting to " + addr,e);
this.sock = createSocket();
}
}
Thread.sleep(1000);
}
self.authLearner.authenticate(sock, hostname);
leaderIs = BinaryInputArchive.getArchive(new BufferedInputStream(
sock.getInputStream()));
bufferedOutput = new BufferedOutputStream(sock.getOutputStream());
leaderOs = BinaryOutputArchive.getArchive(bufferedOutput);
}
18.2.3、Leader.lead()创建 LearnerHandler
Leader.lead()
void lead() throws IOException, InterruptedException {
self.end_fle = Time.currentElapsedTime();
long electionTimeTaken = self.end_fle - self.start_fle;
self.setElectionTimeTaken(electionTimeTaken);
LOG.info("LEADING - LEADER ELECTION TOOK - {} {}", electionTimeTaken,
QuorumPeer.FLE_TIME_UNIT);
self.start_fle = 0;
self.end_fle = 0;
zk.registerJMX(new LeaderBean(this, zk), self.jmxLocalPeerBean);
try {
self.tick.set(0);
// 恢复数据到内存，启动时，其实已经加载过了
zk.loadData();
leaderStateSummary = new StateSummary(self.getCurrentEpoch(), zk.getLastProcessedZxid());
// Start thread that waits for connection requests from
// new followers.
// 等待其他 follower 节点向 leader 节点发送同步状态
cnxAcceptor = new LearnerCnxAcceptor();
cnxAcceptor.start();
long epoch = getEpochToPropose(self.getId(), self.getAcceptedEpoch());
zk.setZxid(ZxidUtils.makeZxid(epoch, 0));
synchronized(this){
lastProposed = zk.getZxid();
}
......
} finally {
zk.unregisterJMX(this);
}
}
LearnerCnxAcceptor
public void run() {
try {
while (!stop) {
Socket s = null;
boolean error = false;
try {
// 等待接收 follower 的状态同步申请
s = ss.accept();
// start with the initLimit, once the ack is processed
// in LearnerHandler switch to the syncLimit
s.setSoTimeout(self.tickTime * self.initLimit);
s.setTcpNoDelay(nodelay);
BufferedInputStream is = new BufferedInputStream(
s.getInputStream());
// 一旦接收到 follower 的请求，就创建 LearnerHandler 对象，处理请求
LearnerHandler fh = new LearnerHandler(s, is, Leader.this);
// 启动线程
fh.start();
} catch (SocketException e) {
......
} catch (Exception e) {
LOG.warn("Exception while accepting follower", e.getMessage());
handleException(this.getName(), e);
}
}
LearnerHandler
由于 public class LearnerHandler extends ZooKeeperThread{}，说明 LearnerHandler 是一个线程。所以 fh.start()执行的是 LearnerHandler 中的 run()方法。
public void run() {
try {
leader.addLearnerHandler(this);
// 心跳处理
tickOfNextAckDeadline = leader.self.tick.get() + leader.self.initLimit + leader.self.syncLimit;
ia = BinaryInputArchive.getArchive(bufferedInput);
bufferedOutput = new BufferedOutputStream(sock.getOutputStream());
oa = BinaryOutputArchive.getArchive(bufferedOutput);
// 从网络中接收消息，并反序列化为 packet
QuorumPacket qp = new QuorumPacket();
ia.readRecord(qp, "packet");
if(qp.getType() != Leader.FOLLOWERINFO && qp.getType() != Leader.OBSERVERINFO){
LOG.error("First packet " + qp.toString()
+ " is not FOLLOWERINFO or OBSERVERINFO!");
return;
}
byte learnerInfoData[] = qp.getData();
// 选举结束后，observer 和 follower 都应该给 leader 发送一个标志信息：FOLLOWERINFO 或者 OBSERVERINFO
if (learnerInfoData != null) {
ByteBuffer bbsid = ByteBuffer.wrap(learnerInfoData);
if (learnerInfoData.length >= 8) {
this.sid = bbsid.getLong();
}
if (learnerInfoData.length >= 12) {
this.version = bbsid.getInt(); // protocolVersion
}
if (learnerInfoData.length >= 20) {
long configVersion = bbsid.getLong();
if (configVersion > leader.self.getQuorumVerifier().getVersion()) {
throw new IOException("Follower is ahead of the leader (has a later activated configuration)");
}
}
} else {
this.sid = leader.followerCounter.getAndDecrement();
}
if (leader.self.getView().containsKey(this.sid)) {
LOG.info("Follower sid: " + this.sid + " : info : "
+ leader.self.getView().get(this.sid).toString());
} else {
LOG.info("Follower sid: " + this.sid + " not in the current config " + Long.toHexString(leader.self.getQuorumVerifier().getVersion()));
}
if (qp.getType() == Leader.OBSERVERINFO) {
learnerType = LearnerType.OBSERVER;
}
// 读取 Follower 发送过来的 lastAcceptedEpoch
// 选举过程中，所使用的 epoch，其实还是上一任 leader 的 epoch
long lastAcceptedEpoch = ZxidUtils.getEpochFromZxid(qp.getZxid());
long peerLastZxid;
StateSummary ss = null;
// 读取 follower 发送过来的 zxid
long zxid = qp.getZxid();
// Leader 根据从 Follower 获取 sid 和旧的 epoch，构建新的 epoch
long newEpoch = leader.getEpochToPropose(this.getSid(), lastAcceptedEpoch);
long newLeaderZxid = ZxidUtils.makeZxid(newEpoch, 0);
if (this.getVersion() < 0x10000) {
// we are going to have to extrapolate the epoch information
long epoch = ZxidUtils.getEpochFromZxid(zxid);
ss = new StateSummary(epoch, zxid);
// fake the message
leader.waitForEpochAck(this.getSid(), ss);
} else {
byte ver[] = new byte[4];
ByteBuffer.wrap(ver).putInt(0x10000);
// Leader 向 Follower 发送信息（包含:zxid 和 newEpoch）
QuorumPacket newEpochPacket = new QuorumPacket(Leader.LEADERINFO, newLeaderZxid, ver, null);
oa.writeRecord(newEpochPacket, "packet");
bufferedOutput.flush();
QuorumPacket ackEpochPacket = new QuorumPacket();
ia.readRecord(ackEpochPacket, "packet");
if (ackEpochPacket.getType() != Leader.ACKEPOCH) {
LOG.error(ackEpochPacket.toString()
+ " is not ACKEPOCH");
return;
}
ByteBuffer bbepoch = ByteBuffer.wrap(ackEpochPacket.getData());
ss = new StateSummary(bbepoch.getInt(), ackEpochPacket.getZxid());
leader.waitForEpochAck(this.getSid(), ss);
}
peerLastZxid = ss.getLastZxid();
......
} finally {
LOG.warn("******* GOODBYE "
+ (sock != null ? sock.getRemoteSocketAddress() : "<null>")
+ " ********");
shutdown();
}
}
18.2.4、Follower.lead()创建 registerWithLeader
void followLeader() throws InterruptedException {
self.end_fle = Time.currentElapsedTime();
long electionTimeTaken = self.end_fle - self.start_fle;
self.setElectionTimeTaken(electionTimeTaken);
LOG.info("FOLLOWING - LEADER ELECTION TOOK - {} {}", electionTimeTaken,
QuorumPeer.FLE_TIME_UNIT);
self.start_fle = 0;
self.end_fle = 0;
fzk.registerJMX(new FollowerBean(this, zk), self.jmxLocalPeerBean);
try {
// 查找 leader
QuorumServer leaderServer = findLeader();
try {
// 连接 leader
connectToLeader(leaderServer.addr, leaderServer.hostname);
// 向 leader 注册
long newEpochZxid = registerWithLeader(Leader.FOLLOWERINFO);
if (self.isReconfigStateChange())
throw new Exception("learned about role change");
//check to see if the leader zxid is lower than ours
//this should never happen but is just a safety check
long newEpoch = ZxidUtils.getEpochFromZxid(newEpochZxid);
if (newEpoch < self.getAcceptedEpoch()) {
LOG.error("Proposed leader epoch " + ZxidUtils.zxidToString(newEpochZxid)
+ " is less than our accepted epoch " + ZxidUtils.zxidToString(self.getAcceptedEpoch()));
throw new IOException("Error: Epoch of leader is lower");
}
syncWithLeader(newEpochZxid);
QuorumPacket qp = new QuorumPacket();
while (this.isRunning()) {
readPacket(qp);
processPacket(qp);
}
} catch (Exception e) {
LOG.warn("Exception when following the leader", e);
try {
sock.close();
} catch (IOException e1) {
e1.printStackTrace();
}
// clear pending revalidations
pendingRevalidations.clear();
}
} finally {
zk.unregisterJMX((Learner)this);
}
}
registerWithLeader(Leader.FOLLOWERINFO)
protected long registerWithLeader(int pktType) throws IOException{
/*
* Send follower info, including last zxid and sid
*/
long lastLoggedZxid = self.getLastLoggedZxid();
QuorumPacket qp = new QuorumPacket();
qp.setType(pktType);
qp.setZxid(ZxidUtils.makeZxid(self.getAcceptedEpoch(), 0));
/*
* Add sid to payload
*/
LearnerInfo li = new LearnerInfo(self.getId(), 0x10000, self.getQuorumVerifier().getVersion());
ByteArrayOutputStream bsid = new ByteArrayOutputStream();
BinaryOutputArchive boa = BinaryOutputArchive.getArchive(bsid);
boa.writeRecord(li, "LearnerInfo");
qp.setData(bsid.toByteArray());
// 发送 FollowerInfo 给 Leader
writePacket(qp, true);
// 读取 Leader 返回的结果：LeaderInfo
readPacket(qp);
final long newEpoch = ZxidUtils.getEpochFromZxid(qp.getZxid());
// 如果接收到 LeaderInfo
if (qp.getType() == Leader.LEADERINFO) {
// we are connected to a 1.0 server so accept the new epoch and read the next packet
leaderProtocolVersion = ByteBuffer.wrap(qp.getData()).getInt();
byte epochBytes[] = new byte[4];
final ByteBuffer wrappedEpochBytes = ByteBuffer.wrap(epochBytes);
// 接收 leader 的 epoch
if (newEpoch > self.getAcceptedEpoch()) {
// 把自己原来的 epoch 保存在 wrappedEpochBytes 里
wrappedEpochBytes.putInt((int)self.getCurrentEpoch());
// 把 leader 发送过来的 epoch 保存起来
self.setAcceptedEpoch(newEpoch);
} else if (newEpoch == self.getAcceptedEpoch()) {
// since we have already acked an epoch equal to the leaders, we cannot ack
// again, but we still need to send our lastZxid to the leader so that we can
// sync with it if it does assume leadership of the epoch.
// the -1 indicates that this reply should not count as an ack for the new epoch
wrappedEpochBytes.putInt(-1);
} else {
throw new IOException("Leaders epoch, " + newEpoch + " is less than accepted epoch, " + self.getAcceptedEpoch());
}
// 发送 ackepoch 给 leader（包含了自己的：epoch 和 zxid）
QuorumPacket ackNewEpoch = new QuorumPacket(Leader.ACKEPOCH, lastLoggedZxid, epochBytes, null);
writePacket(ackNewEpoch, true);
return ZxidUtils.makeZxid(newEpoch, 0);
} else {
if (newEpoch > self.getAcceptedEpoch()) {
self.setAcceptedEpoch(newEpoch);
}
if (qp.getType() != Leader.NEWLEADER) {
LOG.error("First packet should have been NEWLEADER");
throw new IOException("First packet should have been NEWLEADER");
}
return qp.getZxid();
}
}
18.2.5、Leader.lead()接收 Follwer 状态，根据同步方式发送同步消息
LearnerHandler
由于 public class LearnerHandler extends ZooKeeperThread{}，说明 LearnerHandler 是一个线程。所以 fh.start()执行的是 LearnerHandler 中的 run()方法。
public void run() {
try {
leader.addLearnerHandler(this);
// 心跳处理
tickOfNextAckDeadline = leader.self.tick.get() + leader.self.initLimit + leader.self.syncLimit;
ia = BinaryInputArchive.getArchive(bufferedInput);
bufferedOutput = new BufferedOutputStream(sock.getOutputStream());
oa = BinaryOutputArchive.getArchive(bufferedOutput);
// 从网络中接收消息，并反序列化为 packet
QuorumPacket qp = new QuorumPacket();
ia.readRecord(qp, "packet");
if(qp.getType() != Leader.FOLLOWERINFO && qp.getType() != Leader.OBSERVERINFO){
LOG.error("First packet " + qp.toString()
+ " is not FOLLOWERINFO or OBSERVERINFO!");
return;
}
byte learnerInfoData[] = qp.getData();
// 选举结束后，observer 和 follower 都应该给 leader 发送一个标志信息：FOLLOWERINFO 或者 OBSERVERINFO
if (learnerInfoData != null) {
ByteBuffer bbsid = ByteBuffer.wrap(learnerInfoData);
if (learnerInfoData.length >= 8) {
this.sid = bbsid.getLong();
}
if (learnerInfoData.length >= 12) {
this.version = bbsid.getInt(); // protocolVersion
}
if (learnerInfoData.length >= 20) {
long configVersion = bbsid.getLong();
if (configVersion > leader.self.getQuorumVerifier().getVersion()) {
throw new IOException("Follower is ahead of the leader (has a later activated configuration)");
}
}
} else {
this.sid = leader.followerCounter.getAndDecrement();
}
if (leader.self.getView().containsKey(this.sid)) {
LOG.info("Follower sid: " + this.sid + " : info : "
+ leader.self.getView().get(this.sid).toString());
} else {
LOG.info("Follower sid: " + this.sid + " not in the current config " + Long.toHexString(leader.self.getQuorumVerifier().getVersion()));
}
if (qp.getType() == Leader.OBSERVERINFO) {
learnerType = LearnerType.OBSERVER;
}
// 读取 Follower 发送过来的 lastAcceptedEpoch
// 选举过程中，所使用的 epoch，其实还是上一任 leader 的 epoch
long lastAcceptedEpoch = ZxidUtils.getEpochFromZxid(qp.getZxid());
long peerLastZxid;
StateSummary ss = null;
// 读取 follower 发送过来的 zxid
long zxid = qp.getZxid();
// Leader 根据从 Follower 获取 sid 和旧的 epoch，构建新的 epoch
long newEpoch = leader.getEpochToPropose(this.getSid(), lastAcceptedEpoch);
long newLeaderZxid = ZxidUtils.makeZxid(newEpoch, 0);
if (this.getVersion() < 0x10000) {
// we are going to have to extrapolate the epoch information
long epoch = ZxidUtils.getEpochFromZxid(zxid);
ss = new StateSummary(epoch, zxid);
// fake the message
leader.waitForEpochAck(this.getSid(), ss);
} else {
byte ver[] = new byte[4];
ByteBuffer.wrap(ver).putInt(0x10000);
// Leader 向 Follower 发送信息（包含:zxid 和 newEpoch）
QuorumPacket newEpochPacket = new QuorumPacket(Leader.LEADERINFO, newLeaderZxid, ver, null);
oa.writeRecord(newEpochPacket, "packet");
bufferedOutput.flush();
// 接收到 Follower 应答的 ackepoch
QuorumPacket ackEpochPacket = new QuorumPacket();
ia.readRecord(ackEpochPacket, "packet");
if (ackEpochPacket.getType() != Leader.ACKEPOCH) {
LOG.error(ackEpochPacket.toString()
+ " is not ACKEPOCH");
return;
}
ByteBuffer bbepoch = ByteBuffer.wrap(ackEpochPacket.getData());
// 保存了对方 follower 或者 observer 的状态：epoch 和 zxid
ss = new StateSummary(bbepoch.getInt(), ackEpochPacket.getZxid());
leader.waitForEpochAck(this.getSid(), ss);
}
peerLastZxid = ss.getLastZxid();
// Take any necessary action if we need to send TRUNC or DIFF
// startForwarding() will be called in all cases
// 方法判断 Leader 和 Follower 是否需要同步
boolean needSnap = syncFollower(peerLastZxid, leader.zk.getZKDatabase(),
leader);
/* if we are not truncating or sending a diff just send a snapshot */
if (needSnap) {
boolean exemptFromThrottle = getLearnerType() != LearnerType.OBSERVER;
LearnerSnapshot snapshot =
leader.getLearnerSnapshotThrottler().beginSnapshot(exemptFromThrottle);
try {
long zxidToSend =
leader.zk.getZKDatabase().getDataTreeLastProcessedZxid();
oa.writeRecord(new QuorumPacket(Leader.SNAP, zxidToSend, null,
null), "packet");
bufferedOutput.flush();
......
} finally {
LOG.warn("******* GOODBYE "
+ (sock != null ? sock.getRemoteSocketAddress() : "<null>")
+ " ********");
shutdown();
}
}
syncFollower(peerLastZxid, leader.zk.getZKDatabase(), leader)
public boolean syncFollower(long peerLastZxid, ZKDatabase db, Leader leader) {
boolean isPeerNewEpochZxid = (peerLastZxid & 0xffffffffL) == 0;
// Keep track of the latest zxid which already queued
long currentZxid = peerLastZxid;
boolean needSnap = true;
boolean txnLogSyncEnabled = db.isTxnLogSyncEnabled();
ReentrantReadWriteLock lock = db.getLogLock();
ReadLock rl = lock.readLock();
try {
rl.lock();
long maxCommittedLog = db.getmaxCommittedLog();
long minCommittedLog = db.getminCommittedLog();
long lastProcessedZxid = db.getDataTreeLastProcessedZxid();
LOG.info("Synchronizing with Follower sid: {} maxCommittedLog=0x{}"
+ " minCommittedLog=0x{} lastProcessedZxid=0x{}"
+ " peerLastZxid=0x{}", getSid(),
Long.toHexString(maxCommittedLog),
Long.toHexString(minCommittedLog),
Long.toHexString(lastProcessedZxid),
Long.toHexString(peerLastZxid));
if (db.getCommittedLog().isEmpty()) {
minCommittedLog = lastProcessedZxid;
maxCommittedLog = lastProcessedZxid;
}
......
return needSnap;
}
18.2.6、Follower.lead()应答 Leader 同步结果
protected void processPacket(QuorumPacket qp) throws Exception{
switch (qp.getType()) {
case Leader.PING:
ping(qp);
break;
case Leader.PROPOSAL:
TxnHeader hdr = new TxnHeader();
Record txn = SerializeUtils.deserializeTxn(qp.getData(), hdr);
if (hdr.getZxid() != lastQueued + 1) {
LOG.warn("Got zxid 0x"
+ Long.toHexString(hdr.getZxid())
+ " expected 0x"
+ Long.toHexString(lastQueued + 1));
}
lastQueued = hdr.getZxid();
if (hdr.getType() == OpCode.reconfig){
SetDataTxn setDataTxn = (SetDataTxn) txn;
QuorumVerifier qv = self.configFromString(new String(setDataTxn.getData()));
self.setLastSeenQuorumVerifier(qv, true);
}
fzk.logRequest(hdr, txn);
break;
case Leader.COMMIT:
fzk.commit(qp.getZxid());
break;
case Leader.COMMITANDACTIVATE:
// get the new configuration from the request
Request request = fzk.pendingTxns.element();
SetDataTxn setDataTxn = (SetDataTxn) request.getTxn();
QuorumVerifier qv = self.configFromString(new String(setDataTxn.getData()));
// get new designated leader from (current) leader's message
ByteBuffer buffer = ByteBuffer.wrap(qp.getData());
long suggestedLeaderId = buffer.getLong();
boolean majorChange =
self.processReconfig(qv, suggestedLeaderId, qp.getZxid(), true);
// commit (writes the new config to ZK tree (/zookeeper/config)
fzk.commit(qp.getZxid());
if (majorChange) {
throw new Exception("changes proposed in reconfig");
}
break;
case Leader.UPTODATE:
LOG.error("Received an UPTODATE message after Follower started");
break;
case Leader.REVALIDATE:
revalidate(qp);
break;
case Leader.SYNC:
fzk.sync();
break;
default:
LOG.warn("Unknown packet type: {}", LearnerHandler.packetToString(qp));
break;
}
}
fzk.commit(qp.getZxid());
public void commit(long zxid) {
if (pendingTxns.size() == 0) {
LOG.warn("Committing " + Long.toHexString(zxid)
+ " without seeing txn");
return;
}
long firstElementZxid = pendingTxns.element().zxid;
if (firstElementZxid != zxid) {
LOG.error("Committing zxid 0x" + Long.toHexString(zxid)
+ " but next pending txn 0x"
+ Long.toHexString(firstElementZxid));
System.exit(12);
}
Request request = pendingTxns.remove();
commitProcessor.commit(request);
}
18.2.7、Leader.lead()应答 Follower
由于 public class LearnerHandler extends ZooKeeperThread{}，说明 LearnerHandler 是一个线程。所以 fh.start()执行的是 LearnerHandler 中的 run()方法。
public void run() {
......
//
LOG.debug("Sending UPTODATE message to " + sid);
queuedPackets.add(new QuorumPacket(Leader.UPTODATE, -1, null, null));
while (true) {
......
}
}
19、服务端 Leader 启动
19.1、服务端Leader启动源码解析流程图
Ctrl + n 全局查找 Leader，然后 ctrl + f 查找 lead
Leader.java
void lead() throws IOException, InterruptedException {
... ...
// 启动 zookeeper 服务
startZkServer();
... ...
}
startZkServer();
private synchronized void startZkServer() {
// Update lastCommitted and Db's zxid to a value representing the new epoch
lastCommitted = zk.getZxid();
LOG.info("Have quorum of supporters, sids: [ "
+ newLeaderProposal.ackSetsToString()
+ " ]; starting up and setting last processed zxid: 0x{}",
Long.toHexString(zk.getZxid()));
/*
* ZOOKEEPER-1324. the leader sends the new config it must complete
* to others inside a NEWLEADER message (see LearnerHandler where
* the NEWLEADER message is constructed), and once it has enough
* acks we must execute the following code so that it applies the
* config to itself.
*/
QuorumVerifier newQV = self.getLastSeenQuorumVerifier();
Long designatedLeader = getDesignatedLeader(newLeaderProposal, zk.getZxid());
self.processReconfig(newQV, designatedLeader, zk.getZxid(), true);
if (designatedLeader != self.getId()) {
allowedToCommit = false;
}
// 启动 Zookeeper
zk.startup();
......
}
zk.startup();
@Override
public synchronized void startup() {
super.startup();
if (containerManager != null) {
containerManager.start();
}
}
super.startup();
public synchronized void startup() {
if (sessionTracker == null) {
createSessionTracker();
}
startSessionTracker();
setupRequestProcessors();
registerJMX();
setState(State.RUNNING);
notifyAll();
}
setupRequestProcessors();
protected void setupRequestProcessors() {
RequestProcessor finalProcessor = new FinalRequestProcessor(this);
RequestProcessor syncProcessor = new SyncRequestProcessor(this,
finalProcessor);
((SyncRequestProcessor)syncProcessor).start();
firstProcessor = new PrepRequestProcessor(this, syncProcessor);
((PrepRequestProcessor)firstProcessor).start();
}
点击 PrepRequestProcessor，并查找它的 run 方法
public void run() {
try {
while (true) {
Request request = submittedRequests.take();
long traceMask = ZooTrace.CLIENT_REQUEST_TRACE_MASK;
if (request.type == OpCode.ping) {
traceMask = ZooTrace.CLIENT_PING_TRACE_MASK;
}
if (LOG.isTraceEnabled()) {
ZooTrace.logRequest(LOG, traceMask, 'P', request, "");
}
if (Request.requestOfDeath == request) {
break;
}
pRequest(request);
}
} catch (RequestProcessorException e) {
if (e.getCause() instanceof XidRolloverException) {
LOG.info(e.getCause().getMessage());
}
handleException(this.getName(), e);
} catch (Exception e) {
handleException(this.getName(), e);
}
LOG.info("PrepRequestProcessor exited loop!");
}
pRequest(request);
protected void pRequest(Request request) throws RequestProcessorException {
// LOG.info("Prep>>> cxid = " + request.cxid + " type = " +
// request.type + " id = 0x" + Long.toHexString(request.sessionId));
request.setHdr(null);
request.setTxn(null);
try {
switch (request.type) {
case OpCode.createContainer:
case OpCode.create:
case OpCode.create2:
CreateRequest create2Request = new CreateRequest();
pRequest2Txn(request.type, zks.getNextZxid(), request, create2Request, true);
break;
case OpCode.createTTL:
CreateTTLRequest createTtlRequest = new CreateTTLRequest();
pRequest2Txn(request.type, zks.getNextZxid(), request, createTtlRequest, true);
break;
case OpCode.deleteContainer:
case OpCode.delete:
DeleteRequest deleteRequest = new DeleteRequest();
pRequest2Txn(request.type, zks.getNextZxid(), request, deleteRequest, true);
break;
case OpCode.setData:
SetDataRequest setDataRequest = new SetDataRequest();
pRequest2Txn(request.type, zks.getNextZxid(), request, setDataRequest, true);
break;
case OpCode.reconfig:
ReconfigRequest reconfigRequest = new ReconfigRequest();
ByteBufferInputStream.byteBuffer2Record(request.request, reconfigRequest);
pRequest2Txn(request.type, zks.getNextZxid(), request, reconfigRequest, true);
break;
case OpCode.setACL:
SetACLRequest setAclRequest = new SetACLRequest();
pRequest2Txn(request.type, zks.getNextZxid(), request, setAclRequest, true);
break;
case OpCode.check:
CheckVersionRequest checkRequest = new CheckVersionRequest();
pRequest2Txn(request.type, zks.getNextZxid(), request, checkRequest, true);
break;
case OpCode.multi:
MultiTransactionRecord multiRequest = new MultiTransactionRecord();
try {
ByteBufferInputStream.byteBuffer2Record(request.request, multiRequest);
} catch(IOException e) {
request.setHdr(new TxnHeader(request.sessionId, request.cxid, zks.getNextZxid(),
Time.currentWallTime(), OpCode.multi));
throw e;
}
List<Txn> txns = new ArrayList<Txn>();
//Each op in a multi-op must have the same zxid!
long zxid = zks.getNextZxid();
KeeperException ke = null;
//Store off current pending change records in case we need to rollback
Map<String, ChangeRecord> pendingChanges = getPendingChanges(multiRequest);
for(Op op: multiRequest) {
Record subrequest = op.toRequestRecord();
int type;
Record txn;
/* If we've already failed one of the ops, don't bother
* trying the rest as we know it's going to fail and it
* would be confusing in the logfiles.
*/
if (ke != null) {
type = OpCode.error;
txn = new ErrorTxn(Code.RUNTIMEINCONSISTENCY.intValue());
}
/* Prep the request and convert to a Txn */
else {
try {
pRequest2Txn(op.getType(), zxid, request, subrequest, false);
type = request.getHdr().getType();
txn = request.getTxn();
} catch (KeeperException e) {
ke = e;
type = OpCode.error;
txn = new ErrorTxn(e.code().intValue());
if (e.code().intValue() > Code.APIERROR.intValue()) {
LOG.info("Got user-level KeeperException when processing {} aborting" +
" remaining multi ops. Error Path:{} Error:{}",
request.toString(), e.getPath(), e.getMessage());
}
request.setException(e);
/* Rollback change records from failed multi-op */
rollbackPendingChanges(zxid, pendingChanges);
}
}
//FIXME: I don't want to have to serialize it here and then
// immediately deserialize in next processor. But I'm
// not sure how else to get the txn stored into our list.
ByteArrayOutputStream baos = new ByteArrayOutputStream();
BinaryOutputArchive boa = BinaryOutputArchive.getArchive(baos);
txn.serialize(boa, "request") ;
ByteBuffer bb = ByteBuffer.wrap(baos.toByteArray());
txns.add(new Txn(type, bb.array()));
}
request.setHdr(new TxnHeader(request.sessionId, request.cxid, zxid,
Time.currentWallTime(), request.type));
request.setTxn(new MultiTxn(txns));
break;
//create/close session don't require request record
case OpCode.createSession:
case OpCode.closeSession:
if (!request.isLocalSession()) {
pRequest2Txn(request.type, zks.getNextZxid(), request,
null, true);
}
break;
//All the rest don't need to create a Txn - just verify session
case OpCode.sync:
case OpCode.exists:
case OpCode.getData:
case OpCode.getACL:
case OpCode.getChildren:
case OpCode.getChildren2:
case OpCode.ping:
case OpCode.setWatches:
case OpCode.checkWatches:
case OpCode.removeWatches:
zks.sessionTracker.checkSession(request.sessionId,
request.getOwner());
break;
default:
LOG.warn("unknown type " + request.type);
break;
......
request.zxid = zks.getZxid();
nextProcessor.processRequest(request);
}
20、服务端 Follower 启动
20.1、服务端 Follower启动源码解析流程图
Ctrl + n 全局查找 Follower，然后 ctrl + f 查找 followLeader
void followLeader() throws InterruptedException {
self.end_fle = Time.currentElapsedTime();
long electionTimeTaken = self.end_fle - self.start_fle;
self.setElectionTimeTaken(electionTimeTaken);
LOG.info("FOLLOWING - LEADER ELECTION TOOK - {} {}", electionTimeTaken,
QuorumPeer.FLE_TIME_UNIT);
self.start_fle = 0;
self.end_fle = 0;
fzk.registerJMX(new FollowerBean(this, zk), self.jmxLocalPeerBean);
try {
QuorumServer leaderServer = findLeader();
try {
connectToLeader(leaderServer.addr, leaderServer.hostname);
long newEpochZxid = registerWithLeader(Leader.FOLLOWERINFO);
if (self.isReconfigStateChange())
throw new Exception("learned about role change");
//check to see if the leader zxid is lower than ours
//this should never happen but is just a safety check
long newEpoch = ZxidUtils.getEpochFromZxid(newEpochZxid);
if (newEpoch < self.getAcceptedEpoch()) {
LOG.error("Proposed leader epoch " + ZxidUtils.zxidToString(newEpochZxid)
+ " is less than our accepted epoch " + ZxidUtils.zxidToString(self.getAcceptedEpoch()));
throw new IOException("Error: Epoch of leader is lower");
}
syncWithLeader(newEpochZxid);
QuorumPacket qp = new QuorumPacket();
while (this.isRunning()) {
readPacket(qp);
processPacket(qp);
}
} catch (Exception e) {
......
} finally {
zk.unregisterJMX((Learner)this);
}
}
readPacket(qp);
void readPacket(QuorumPacket pp) throws IOException {
synchronized (leaderIs) {
leaderIs.readRecord(pp, "packet");
}
if (LOG.isTraceEnabled()) {
final long traceMask =
(pp.getType() == Leader.PING) ? ZooTrace.SERVER_PING_TRACE_MASK
: ZooTrace.SERVER_PACKET_TRACE_MASK;
ZooTrace.logQuorumPacket(LOG, traceMask, 'i', pp);
}
}
processPacket(qp);
protected void processPacket(QuorumPacket qp) throws Exception{
switch (qp.getType()) {
case Leader.PING:
ping(qp);
break;
case Leader.PROPOSAL:
TxnHeader hdr = new TxnHeader();
Record txn = SerializeUtils.deserializeTxn(qp.getData(), hdr);
if (hdr.getZxid() != lastQueued + 1) {
LOG.warn("Got zxid 0x"
+ Long.toHexString(hdr.getZxid())
+ " expected 0x"
+ Long.toHexString(lastQueued + 1));
}
lastQueued = hdr.getZxid();
if (hdr.getType() == OpCode.reconfig){
SetDataTxn setDataTxn = (SetDataTxn) txn;
QuorumVerifier qv = self.configFromString(new String(setDataTxn.getData()));
self.setLastSeenQuorumVerifier(qv, true);
}
fzk.logRequest(hdr, txn);
break;
case Leader.COMMIT:
fzk.commit(qp.getZxid());
break;
case Leader.COMMITANDACTIVATE:
// get the new configuration from the request
Request request = fzk.pendingTxns.element();
SetDataTxn setDataTxn = (SetDataTxn) request.getTxn();
QuorumVerifier qv = self.configFromString(new String(setDataTxn.getData()));
// get new designated leader from (current) leader's message
ByteBuffer buffer = ByteBuffer.wrap(qp.getData());
long suggestedLeaderId = buffer.getLong();
boolean majorChange =
self.processReconfig(qv, suggestedLeaderId, qp.getZxid(), true);
// commit (writes the new config to ZK tree (/zookeeper/config)
fzk.commit(qp.getZxid());
if (majorChange) {
throw new Exception("changes proposed in reconfig");
}
break;
case Leader.UPTODATE:
LOG.error("Received an UPTODATE message after Follower started");
break;
case Leader.REVALIDATE:
revalidate(qp);
break;
case Leader.SYNC:
fzk.sync();
break;
default:
LOG.warn("Unknown packet type: {}", LearnerHandler.packetToString(qp));
break;
}
}
751
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
