kafka及zookeeper安装
下载相应包,进行解压
新建jass.conf如
zookeeper与kafka都需要用到
分别将该文件复制到zookeeper与kafka相应配置文件同级
KafkaServer{
org.apache.kafka.common.security.plain.PlainLoginModule required
username="admin"
password="ss"
user_admin="ss"
user_reader="reader"
user_writer="writer";
};
KafkaClient {
org.apache.kafka.common.security.plain.PlainLoginModule required
username="admin"
password="ss";
};
zookeeper配置如下
# The number of milliseconds of each tick
tickTime=2000
# The number of ticks that the initial
# synchronization phase can take
initLimit=10
# The number of ticks that can pass between
# sending a request and getting an acknowledgement
syncLimit=5
# the directory where the snapshot is stored.
# do not use /tmp for storage, /tmp here is just
# example sakes.
dataDir=/root/app/zk_data
# the port at which the clients will connect
clientPort=2181
# the maximum number of client connections.
# increase this if you need to handle more clients
#maxClientCnxns=60
#server.1=casic.zookeeper1.com:2888:3888
#server.2=casic.zookeeper2.com:2888:3888
#server.3=casic.zookeeper3.com:2888:3888
bin目录下新建java.env文件
export SERVER_JVMFLAGS="-Djava.security.auth.login.config=/home/app/Zookeeper/apache-zookeeper-3.6.1-bin/conf/zk_jaas.conf"
lib包复制
cp如下文件至zookeeper 中的lib包中
kafka-clients-3.0.0.jar
lz4-java-1.7.1.jar
slf4j-api-1.7.30.jar
slf4j-log4j12-1.7.30.jar
snappy-java-1.1.8.1.jar
开放端口
firewall-cmd --zone=public --add-port=2888/tcp --permanent
firewall-cmd --zone=public --add-port=3888/tcp --permanent
firewall-cmd --zone=public --add-port=2181/tcp --permanent
firewall-cmd --reload
firewall-cmd --zone=public --list-ports
更改kafka下server.properties文件
# Licensed to the Apache Software Foundation (ASF) under one or more
# limitations under the License.
# see kafka.server.KafkaConfig for additional details and defaults
############################# Server Basics #############################
# The id of the broker. This must be set to a unique integer for each broker.
broker.id=0
############################# Socket Server Settings #############################
# The address the socket server listens on. It will get the value returned from
# java.net.InetAddress.getCanonicalHostName() if not configured.
# FORMAT:
# listeners = listener_name://host_name:port
# EXAMPLE:
# listeners = PLAINTEXT://your.host.name:9092 实际端口号
listeners=SASL_PLAINTEXT://0.0.0.0:9092
#advertised.listeners=PLAINTEXT://your.host.name:9092
# 请求端口号
advertised.listeners=SASL_PLAINTEXT://casic.kafka1.com:20104
advertised.host.name=casic.kafka1.com
#listener.security.protocol.map=PLAINTEXT:PLAINTEXT,SSL:SSL,SASL_PLAINTEXT:SASL_PLAINTEXT,SASL_SSL:SASL_SSL
listener.security.protocol.map=SASL_PLAINTEXT:SASL_PLAINTEXT
security.inter.broker.protocol=SASL_PLAINTEXT
sasl.mechanism.inter.broker.protocol=PLAIN
sasl.enabled.mechanisms=PLAIN
allow.everyone.if.no.acl.found=true
auto.create.topics.enable=true
super.users=User:admin
# The number of threads that the server uses for receiving requests from the network and sending responses to the network
num.network.threads=3
# The number of threads that the server uses for processing requests, which may include disk I/O
num.io.threads=8
# The send buffer (SO_SNDBUF) used by the socket server
socket.send.buffer.bytes=102400
# The receive buffer (SO_RCVBUF) used by the socket server
socket.receive.buffer.bytes=102400
# The maximum size of a request that the socket server will accept (protection against OOM)
socket.request.max.bytes=104857600
############################# Log Basics #############################
# A comma separated list of directories under which to store log files
log.dirs=/tmp/kafka-logs
# The default number of log partitions per topic. More partitions allow greater
# parallelism for consumption, but this will also result in more files across
# the brokers.
num.partitions=1
# The number of threads per data directory to be used for log recovery at startup and flushing at shutdown.
# This value is recommended to be increased for installations with data dirs located in RAID array.
num.recovery.threads.per.data.dir=1
############################# Internal Topic Settings #############################
# The replication factor for the group metadata internal topics "__consumer_offsets" and "__transaction_state"
# For anything other than development testing, a value greater than 1 is recommended to ensure availability such as 3.
offsets.topic.replication.factor=1
transaction.state.log.replication.factor=1
transaction.state.log.min.isr=1
# The minimum age of a log file to be eligible for deletion due to age
log.retention.hours=168
# A size-based retention policy for logs. Segments are pruned from the log unless the remaining
# segments drop below log.retention.bytes. Functions independently of log.retention.hours.
#log.retention.bytes=1073741824
# The maximum size of a log segment file. When this size is reached a new log segment will be created.
log.segment.bytes=1073741824
# The interval at which log segments are checked to see if they can be deleted according
# to the retention policies
log.retention.check.interval.ms=300000
############################# Zookeeper #############################
# Zookeeper connection string (see zookeeper docs for details).
# This is a comma separated host:port pairs, each corresponding to a zk
# server. e.g. "127.0.0.1:3000,127.0.0.1:3001,127.0.0.1:3002".
# You can also append an optional chroot string to the urls to specify the
# root directory for all kafka znodes.
zookeeper.connect=casic.zookeeper1.com:2181
# Timeout in ms for connecting to zookeeper
zookeeper.connection.timeout.ms=18000
############################# Group Coordinator Settings #############################
group.initial.rebalance.delay.ms=0
修改kafka启动文件kafka-server-start.sh
if [ $# -lt 1 ];
then
echo "USAGE: $0 [-daemon] server.properties [--override property=value]*"
exit 1
fi
base_dir=$(dirname $0)
if [ "x$KAFKA_LOG4J_OPTS" = "x" ]; then
export KAFKA_LOG4J_OPTS="-Dlog4j.configuration=file:$base_dir/../config/log4j.properties"
fi
if [ "x$KAFKA_HEAP_OPTS" = "x" ]; then
export KAFKA_HEAP_OPTS="-Xmx1G -Xms1G"
fi
EXTRA_ARGS=${EXTRA_ARGS-'-name kafkaServer -loggc'}
COMMAND=$1
case $COMMAND in
-daemon)
EXTRA_ARGS="-daemon "$EXTRA_ARGS
shift
;;
*)
;;
esac
exec $base_dir/kafka-run-class.sh $EXTRA_ARGS -Djava.security.auth.login.config=/home/app/kafka_2.13-3.0.0/config/jaas.conf kafka.Kafka "$@"
主要增加
$EXTRA_ARGS -Djava.security.auth.login.config=/home/app/kafka_2.13-3.0.0/config/jaas.conf kafka.Kafka
启动服务
./zkServer.sh start
./kafka-server-start.sh -daemon ../config/server.properties