python利器-bluepy 一款python封装的BLE利器简单介绍

1、bluepy 简介

bluepy 是github上一个很好的蓝牙开源项目，其地址在 LINK-1， 其主要功能是用python实现linux上BLE的接口。

This is a project to provide an API to allow access to Bluetooth Low Energy devices from Python. At present it runs on Linux only; I've mostly developed it using a Raspberry Pi, but it will also run on x86 Debian Linux.

支持python版本：The code is tested on Python 2.7 and 3.4; it should also work on 3.3.

2、安装

直接源码安装，python3加持：

sudo apt-get install git build-essential libglib2.0-dev

git clone https://github.com/IanHarvey/bluepy.git

cd bluepy

python3 setup.py build

sudo python3 setup.py install

注：不要用python2，这辈子都不会用python2!

注：进行到这一步突然惊醒我的台式机无蓝牙，遂开启我的无屏幕树莓派，用命令找其ip，并用ssh登录：

➜ Downloads sudo nmap -sS -p 22 192.168.31.0/24 | grep -B 5 -A 0 "Pi"

Nmap scan report for 192.168.31.51

Host is up (0.19s laten