一、前述
通常，我们在使用ListView / GridView时，都需要使用Adapter，Adapter有多种，最常用的就是BaseAdapter 和 CursorAdapter了，前者是属于通用的，而后者通常会与数据库一起来使用。
1. Adapter在源码中是interface，而不是AbstractClass（http://developer.android.com/reference/android/widget/Adapter.html）；
2. BaseAdapter是抽象类，而不是interface；
3. CursorAdapter也是抽象类，它是继承于BaseAdapter的；
4. 还有其它Adapter，如ListAdapter等；
大家看了以上几点后，肯定会有疑问，BaseAdapter与Adapter是怎么联系起来的？
看过文档或源码的朋友肯定知道：
/**
* Common base class of common implementation for an {@link Adapter} that can be
* used in both {@link ListView} (by implementing the specialized
* {@link ListAdapter} interface} and {@link Spinner} (by implementing the
* specialized {@link SpinnerAdapter} interface.
*/
public abstract class BaseAdapter implements ListAdapter, SpinnerAdapterListAdapter和SpinnerAdapter是两个interface，它们直接继承于Adapter，BaseAdapter是抽象类，可以选择性的实现接口里定义的方法；
其实，BaseAdapter也是大多数XXXAdapter（不是接口，而是类或抽象类）的parent，只有少数和BaseAdapter一样，如：HeaderViewListAdapter。
二、Adapter
2.1 Adapter
public interface Adapter {
/**
* Register an observer that is called when changes happen to the data used by this adapter.
*
* @param observer the object that gets notified when the data set changes.
*/
void registerDataSetObserver(DataSetObserver observer);
/**
* Unregister an observer that has previously been registered with this
* adapter via {@link #registerDataSetObserver}.
*
* @param observer the object to unregister.
*/
void unregisterDataSetObserver(DataSetObserver observer);
/**
* How many items are in the data set represented by this Adapter.
*
* @return Count of items.
*/
int getCount();
/**
* Get the data item associated with the specified position in the data set.
*
* @param position Position of the item whose data we want within the adapter's
* data set.
* @return The data at the specified position.
*/
Object getItem(int position);
/**
* Get the row id associated with the specified position in the list.
*
* @param position The position of the item within the adapter's data set whose row id we want.
* @return The id of the item at the specified position.
*/
long getItemId(int position);
/**
* Indicates whether the item ids are stable across changes to the
* underlying data.
*
* @return True if the same id always refers to the same object.
*/
boolean hasStableIds();
/**
* Get a View that displays the data at the specified position in the data set. You can either
* create a View manually or inflate it from an XML layout file. When the View is inflated, the
* parent View (GridView, ListView...) will apply default layout parameters unless you use
* {@link android.view.LayoutInflater#inflate(int, android.view.ViewGroup, boolean)}
* to specify a root view and to prevent attachment to the root.
*
* @param position The position of the item within the adapter's data set of the item whose view
* we want.
* @param convertView The old view to reuse, if possible. Note: You should check that this view
* is non-null and of an appropriate type before using. If it is not possible to convert
* this view to display the correct data, this method can create a new view.
* Heterogeneous lists can specify their number of view types, so that this View is
* always of the right type (see {@link #getViewTypeCount()} and
* {@link #getItemViewType(int)}).
* @param parent The parent that this view will eventually be attached to
* @return A View corresponding to the data at the specified position.
*/
View getView(int position, View convertView, ViewGroup parent);
/**
* An item view type that causes the {@link AdapterView} to ignore the item
* view. For example, this can be used if the client does not want a
* particular view to be given for conversion in
* {@link #getView(int, View, ViewGroup)}.
*
* @see #getItemViewType(int)
* @see #getViewTypeCount()
*/
static final int IGNORE_ITEM_VIEW_TYPE = AdapterView.ITEM_VIEW_TYPE_IGNORE;
/**
* Get the type of View that will be created by {@link #getView} for the specified item.
*
* @param position The position of the item within the adapter's data set whose view type we
* want.
* @return An integer representing the type of View. Two views should share the same type if one
* can be converted to the other in {@link #getView}. Note: Integers must be in the
* range 0 to {@link #getViewTypeCount} - 1. {@link #IGNORE_ITEM_VIEW_TYPE} can
* also be returned.
* @see #IGNORE_ITEM_VIEW_TYPE
*/
int getItemViewType(int position);
/**
* <p>
* Returns the number of types of Views that will be created by
* {@link #getView}. Each type represents a set of views that can be
* converted in {@link #getView}. If the adapter always returns the same
* type of View for all items, this method should return 1.
* </p>
* <p>
* This method will only be called when when the adapter is set on the
* the {@link AdapterView}.
* </p>
*
* @return The number of types of Views that will be created by this adapter
*/
int getViewTypeCount();
static final int NO_SELECTION = Integer.MIN_VALUE;
/**
* @return true if this adapter doesn't contain any data. This is used to determine
* whether the empty view should be displayed. A typical implementation will return
* getCount() == 0 but since getCount() includes the headers and footers, specialized
* adapters might want a different behavior.
*/
boolean isEmpty();
}这里面只定义了方法，其中：
void registerDataSetObserver(DataSetObserver observer);
void unregisterDataSetObserver(DataSetObserver observer);这两个方法我们通常不需要太关心，因为ListView, GridView会自动去注册/取消注册的，DataSetObserver用的是一个观察者模式，目的就是当Adapter中的数据发生变化是，能够通知ListView 或 GridView。
int getCount();
Object getItem(int position);
long getItemId(int position);
View getView(int position, View convertView, ViewGroup parent);当我们继承BaseAdapter时，通常需要实现以上四个方法，这四个方法大家应该用的很熟了，这里我就不说了；
int getItemViewType(int position);
int getViewTypeCount();特别要注意的是这两个方法，通常在BaseAdapter里面，默认是0和1，那我们在什么时候会需要override这两个方法呢？
我们知道Adapter.getView中有个convertView，是用来复用View的，如果数据要进行分组，比如按照手机中的联系人按ABCD....来分类，那么，这个Listview就有两种view，一种是分组标签，另一种就是联系人，因此，我们需要设置ViewTypeCount为2，同时将分组view和联系人view设置不同的view type，这样，复用时，就能区分开来，有效的节省内存。
2.2 ListAdapter
public interface ListAdapter extends Adapter {
/**
* Indicates whether all the items in this adapter are enabled. If the
* value returned by this method changes over time, there is no guarantee
* it will take effect. If true, it means all items are selectable and
* clickable (there is no separator.)
*
* @return True if all items are enabled, false otherwise.
*
* @see #isEnabled(int)
*/
public boolean areAllItemsEnabled();
/**
* Returns true if the item at the specified position is not a separator.
* (A separator is a non-selectable, non-clickable item).
*
* The result is unspecified if position is invalid. An {@link ArrayIndexOutOfBoundsException}
* should be thrown in that case for fast failure.
*
* @param position Index of the item
*
* @return True if the item is not a separator
*
* @see #areAllItemsEnabled()
*/
boolean isEnabled(int position);
}
这里面的方法就两个，一个是判断在Adapter中所有的item可选择或可点击，另一个是指点位置的item可选择或可点击，没啥可讲的；
2.3 SpinnerAdapter
这个是给下拉列表控件用的，就一个方法getDropDownView，其它没啥好讲的；
2.4 BaseAdapter
public abstract class BaseAdapter implements ListAdapter, SpinnerAdapter {
private final DataSetObservable mDataSetObservable = new DataSetObservable();
public boolean hasStableIds() {
return false;
}
public void registerDataSetObserver(DataSetObserver observer) {
mDataSetObservable.registerObserver(observer);
}
public void unregisterDataSetObserver(DataSetObserver observer) {
mDataSetObservable.unregisterObserver(observer);
}
/**
* Notifies the attached observers that the underlying data has been changed
* and any View reflecting the data set should refresh itself.
*/
public void notifyDataSetChanged() {
mDataSetObservable.notifyChanged();
}
/**
* Notifies the attached observers that the underlying data is no longer valid
* or available. Once invoked this adapter is no longer valid and should
* not report further data set changes.
*/
public void notifyDataSetInvalidated() {
mDataSetObservable.notifyInvalidated();
}
public boolean areAllItemsEnabled() {
return true;
}
public boolean isEnabled(int position) {
return true;
}
public View getDropDownView(int position, View convertView, ViewGroup parent) {
return getView(position, convertView, parent);
}
public int getItemViewType(int position) {
return 0;
}
public int getViewTypeCount() {
return 1;
}
public boolean isEmpty() {
return getCount() == 0;
}
}
BaseAdapter也没啥讲的，我们继承时，只用实现它未实现的方法就行了，有需要的话，override一下也行。
三、RecycleBin
在AbsListView（ListView / GridView）中，View复用全是依赖RecycleBin来缓存用过的View。
在《Android ListView的理解（一）》中，讲解obtainView方法中，有提到过该类，不过，只说了如何用，而未说明这个类里面的方法和实现，这次就来分析下。
3.1 类成员
/**
* The RecycleBin facilitates reuse of views across layouts. The RecycleBin has two levels of
* storage: ActiveViews and ScrapViews. ActiveViews are those views which were onscreen at the
* start of a layout. By construction, they are displaying current information. At the end of
* layout, all views in ActiveViews are demoted to ScrapViews. ScrapViews are old views that
* could potentially be used by the adapter to avoid allocating views unnecessarily.
*
* @see android.widget.AbsListView#setRecyclerListener(android.widget.AbsListView.RecyclerListener)
* @see android.widget.AbsListView.RecyclerListener
*/
class RecycleBin {
private RecyclerListener mRecyclerListener;
/**
* The position of the first view stored in mActiveViews.
*/
private int mFirstActivePosition;
/**
* Views that were on screen at the start of layout. This array is populated at the start of
* layout, and at the end of layout all view in mActiveViews are moved to mScrapViews.
* Views in mActiveViews represent a contiguous range of Views, with position of the first
* view store in mFirstActivePosition.
*/
private View[] mActiveViews = new View[0];
/**
* Unsorted views that can be used by the adapter as a convert view.
*/
private ArrayList<View>[] mScrapViews;
private int mViewTypeCount;
private ArrayList<View> mCurrentScrap;
}区区几个成员变量：
1. 当发生View回收时，mRecyclerListener若有注册，则会通知给注册者；
2. mFirstActivePosition对应的是在ListView中，可视区域中的第一个item position（即getFirstVisiblePosition）；
3. mActiveViews存储着当前ListView中，可见区域中的View；
4. mScrapViews是一个ArrayList，为啥？这个与mViewTypeCount相关，那么大家也就猜到了，mScrapViews缓存着ViewTypeCount种类型的View，默认是1，手机联系人是2等；
5. mCurrentScrap就是指向当前mScrapViews中的一组，默认ViewTypeCount = 1的情况下，mCurrentScrap = mScrapViews[0]；
3.2 类方法分析
3.2.1 setViewTypeCount
public void setViewTypeCount(int viewTypeCount) {
if (viewTypeCount < 1) {
throw new IllegalArgumentException("Can't have a viewTypeCount < 1");
}
//noinspection unchecked
ArrayList<View>[] scrapViews = new ArrayList[viewTypeCount];
for (int i = 0; i < viewTypeCount; i++) {
scrapViews[i] = new ArrayList<View>();
}
mViewTypeCount = viewTypeCount;
mCurrentScrap = scrapViews[0];
mScrapViews = scrapViews;
}设置ViewTypeCount，然后初始化类成员变量；
3.2.2 markChildrenDirty
public void markChildrenDirty() {
if (mViewTypeCount == 1) {
final ArrayList<View> scrap = mCurrentScrap;
final int scrapCount = scrap.size();
for (int i = 0; i < scrapCount; i++) {
scrap.get(i).forceLayout();
}
} else {
final int typeCount = mViewTypeCount;
for (int i = 0; i < typeCount; i++) {
final ArrayList<View> scrap = mScrapViews[i];
final int scrapCount = scrap.size();
for (int j = 0; j < scrapCount; j++) {
scrap.get(j).forceLayout();
}
}
}
}将mScrapView中回收回来的View设置一样标志，在下次被复用到ListView中时，告诉viewroot重新layout该view
forceLayout方法
/**
* Forces this view to be laid out during the next layout pass.
* This method does not call requestLayout() or forceLayout()
* on the parent.
*/
public void forceLayout() {
mPrivateFlags |= FORCE_LAYOUT;
mPrivateFlags |= INVALIDATED;
}该方法只是设置标志，并不会通知其parent来重新layout。
3.2.3 shouldRecycleViewType
public boolean shouldRecycleViewType(int viewType) {
return viewType >= 0;
}判断给定的view的viewType指明是否可以回收回。
那什么情况下，viewType < 0？即不能回收？
我们在ListView, GridView 或 AbsListView中，找不到小于0的TYPE定义，但是，在AbsListView的parent类AdapterView中找到了：
public abstract class AdapterView<T extends Adapter> extends ViewGroup {
/**
* The item view type returned by {@link Adapter#getItemViewType(int)} when
* the adapter does not want the item's view recycled.
*/
public static final int ITEM_VIEW_TYPE_IGNORE = -1;
/**
* The item view type returned by {@link Adapter#getItemViewType(int)} when
* the item is a header or footer.
*/
public static final int ITEM_VIEW_TYPE_HEADER_OR_FOOTER = -2;
.........
}上述表明，指定忽略的，或者是 HeaderView / FootView是不被回收的。如有特殊需要可以将自己定义的viewType设置为-1，否则，将会浪费内存，导致OOM，切记！
3.2.4 clear
/**
* Clears the scrap heap.
*/
void clear() {
if (mViewTypeCount == 1) {
final ArrayList<View> scrap = mCurrentScrap;
final int scrapCount = scrap.size();
for (int i = 0; i < scrapCount; i++) {
removeDetachedView(scrap.remove(scrapCount - 1 - i), false);
}
} else {
final int typeCount = mViewTypeCount;
for (int i = 0; i < typeCount; i++) {
final ArrayList<View> scrap = mScrapViews[i];
final int scrapCount = scrap.size();
for (int j = 0; j < scrapCount; j++) {
removeDetachedView(scrap.remove(scrapCount - 1 - j), false);
}
}
}
}这个方法一目了然，清理ScrapView中的View，并将这些View从窗口中Detach。
3.2.5 fillActiveViews
/**
* Fill ActiveViews with all of the children of the AbsListView.
*
* @param childCount The minimum number of views mActiveViews should hold
* @param firstActivePosition The position of the first view that will be stored in
* mActiveViews
*/
void fillActiveViews(int childCount, int firstActivePosition) {
if (mActiveViews.length < childCount) {
mActiveViews = new View[childCount];
}
mFirstActivePosition = firstActivePosition;
final View[] activeViews = mActiveViews;
for (int i = 0; i < childCount; i++) {
View child = getChildAt(i);
AbsListView.LayoutParams lp = (AbsListView.LayoutParams) child.getLayoutParams();
// Don't put header or footer views into the scrap heap
if (lp != null && lp.viewType != ITEM_VIEW_TYPE_HEADER_OR_FOOTER) {
// Note: We do place AdapterView.ITEM_VIEW_TYPE_IGNORE in active views.
// However, we will NOT place them into scrap views.
activeViews[i] = child;
}
}
}该方法就是填充mActiveView数组。当Adapter中的数据个数未发生变化时，此时用户可能只是滚动，或点击等操作，ListView中item的个数会发生变化，因此，需要将可视的item加入到mActiveView中来管理。
3.2.6 getActiveView
/**
* Get the view corresponding to the specified position. The view will be removed from
* mActiveViews if it is found.
*
* @param position The position to look up in mActiveViews
* @return The view if it is found, null otherwise
*/
View getActiveView(int position) {
int index = position - mFirstActivePosition;
final View[] activeViews = mActiveViews;
if (index >=0 && index < activeViews.length) {
final View match = activeViews[index];
activeViews[index] = null;
return match;
}
return null;
}position是adapter中的绝对下标值，mFirstActivePosition前面说过了，是当前可视区域的下标值，对应在adapter中的绝对值，如果找到，则返回找到的View，并将mActiveView对应的位置设置为null。
对于3.2.5和3.2.6这两个方法，在ListView.layoutChildren或GridView.layoutChildren中调用的，用户可能做了一些操作（未导致个数发生变化），以ListView.layoutChildren为例，代码片断：
@Override
protected void layoutChildren() {
.........
// Pull all children into the RecycleBin.
// These views will be reused if possible
final int firstPosition = mFirstPosition;
final RecycleBin recycleBin = mRecycler;
// reset the focus restoration
View focusLayoutRestoreDirectChild = null;
// Don't put header or footer views into the Recycler. Those are
// already cached in mHeaderViews;
if (dataChanged) {
for (int i = 0; i < childCount; i++) {
recycleBin.addScrapView(getChildAt(i), firstPosition+i);
if (ViewDebug.TRACE_RECYCLER) {
ViewDebug.trace(getChildAt(i),
ViewDebug.RecyclerTraceType.MOVE_TO_SCRAP_HEAP, index, i);
}
}
} else {
recycleBin.fillActiveViews(childCount, firstPosition);
}
.........
fillXXX
.........
// Flush any cached views that did not get reused above
recycleBin.scrapActiveViews();
}上面代码分成了三段：
step1：如果数据发生变化，就将所有view加入到mScrapView中，否则，将所有view放到mActiveView中；
step2：添加view到listview中；
step3：回收mActiveView中的未使用的view到mScrapView中；
注：在step1中，如果是addScrapView，则所有的view将会detach，如果是fillActiveViews，则不会detach，只有在step3中，未用到的view才会detach。
3.2.7 retrieveFromScrap（这个不属于RecycleBin类，是属于AbslistView中的方法，不过为了讲之后的方法，这个方法就单独拿出来讲解）
static View retrieveFromScrap(ArrayList<View> scrapViews, int position) {
int size = scrapViews.size();
if (size > 0) {
// See if we still have a view for this position.
for (int i=0; i<size; i++) {
View view = scrapViews.get(i);
if (((AbsListView.LayoutParams)view.getLayoutParams())
.scrappedFromPosition == position) {
scrapViews.remove(i);
return view;
}
}
return scrapViews.remove(size - 1);
} else {
return null;
}
}根据position，从mScrapView中找：
1. 如果有view.scrappedFromPosition = position的，直接返回该view；
2. 否则返回mScrapView中最后一个；
3. 如果缓存中没有view，则返回null；
下面，我们来分析下这三种情况在什么条件下满足？
a. 第三种情况，这个最简单：
一开始，listview稳定后，显示N个，此时mScrapView中是没有缓存view的，当我们向上滚动一小段距离（第一个此时仍显示部分），新的view将会显示，此时listview会调用Adapter.getView，但是缓存中没有，因此convertView是null，所以，我们得分配一块内存来创建新的convertView；
b. 第二种情况：
在a中，我们继续向上滚动，直接第一个view完全移出屏幕（假设没有新的item），此时，第一个view就会被detach，并被加入到mScrapView中；然后，我们还继续向上滚动，直接后面又将要显示新的item view时，此时，系统会从mScrapView中找position对应的View，显然，是找不到的，则将从mScrapView中，取最后一个缓存的view传递给convertView；
c. 第一种情况：
紧接着在b中（标示为橙色的文字后面），第一个被完全移出，加入到mScrapView中，且没有新增的item到listview中，此时，缓存中就只有第一个view；然后，我此时向下滑动，则之前的第一个item，将被显示出来，此时，从缓存中查找position对应的view有没有，当然，肯定是找到了，就直接返回了。
以上三种情况分析完毕！大家也理解了吧，没完全理解的，多想想就能想通啦。
3.2.8 getScrapView
/**
* @return A view from the ScrapViews collection. These are unordered.
*/
View getScrapView(int position) {
if (mViewTypeCount == 1) {
return retrieveFromScrap(mCurrentScrap, position);
} else {
int whichScrap = mAdapter.getItemViewType(position);
if (whichScrap >= 0 && whichScrap < mScrapViews.length) {
return retrieveFromScrap(mScrapViews[whichScrap], position);
}
}
return null;
}getScrapView实际上就是根据viewType，来查找不同的mScrapView，分析了retrieveFromScrap后，getScrapView就很清楚了。
3.2.9 addScrapView
/**
* Put a view into the ScapViews list. These views are unordered.
*
* @param scrap The view to add
*/
void addScrapView(View scrap, int position) {
AbsListView.LayoutParams lp = (AbsListView.LayoutParams) scrap.getLayoutParams();
if (lp == null) {
return;
}
// Don't put header or footer views or views that should be ignored
// into the scrap heap
int viewType = lp.viewType;
if (!shouldRecycleViewType(viewType)) {
if (viewType != ITEM_VIEW_TYPE_HEADER_OR_FOOTER) {
removeDetachedView(scrap, false);
}
return;
}
lp.scrappedFromPosition = position;
if (mViewTypeCount == 1) {
scrap.dispatchStartTemporaryDetach();
mCurrentScrap.add(scrap);
} else {
scrap.dispatchStartTemporaryDetach();
mScrapViews[viewType].add(scrap);
}
if (mRecyclerListener != null) {
mRecyclerListener.onMovedToScrapHeap(scrap);
}
}此方法顾名思义，就是将移出可视区域的view，设置它的scrappedFromPosition，然后从窗口中detach该view，并根据viewType加入到mScrapView中。
3.2.10 scrapActiveViews
/**
* Move all views remaining in mActiveViews to mScrapViews.
*/
void scrapActiveViews() {
final View[] activeViews = mActiveViews;
final boolean hasListener = mRecyclerListener != null;
final boolean multipleScraps = mViewTypeCount > 1;
ArrayList<View> scrapViews = mCurrentScrap;
final int count = activeViews.length;
for (int i = count - 1; i >= 0; i--) {
final View victim = activeViews[i];
if (victim != null) {
final AbsListView.LayoutParams lp
= (AbsListView.LayoutParams) victim.getLayoutParams();
int whichScrap = lp.viewType;
activeViews[i] = null;
if (!shouldRecycleViewType(whichScrap)) {
// Do not move views that should be ignored
if (whichScrap != ITEM_VIEW_TYPE_HEADER_OR_FOOTER) {
removeDetachedView(victim, false);
}
continue;
}
if (multipleScraps) {
scrapViews = mScrapViews[whichScrap];
}
victim.dispatchStartTemporaryDetach();
lp.scrappedFromPosition = mFirstActivePosition + i;
scrapViews.add(victim);
if (hasListener) {
mRecyclerListener.onMovedToScrapHeap(victim);
}
if (ViewDebug.TRACE_RECYCLER) {
ViewDebug.trace(victim,
ViewDebug.RecyclerTraceType.MOVE_FROM_ACTIVE_TO_SCRAP_HEAP,
mFirstActivePosition + i, -1);
}
}
}
pruneScrapViews();
}在分析3.2.5和3.2.6方法时，step3已经提到这个方法了，实际上就是将mActiveView中未使用的view回收（因为，此时已经移出可视区域了）。
3.2.11 pruneScrapViews
/**
* Makes sure that the size of mScrapViews does not exceed the size of mActiveViews.
* (This can happen if an adapter does not recycle its views).
*/
private void pruneScrapViews() {
final int maxViews = mActiveViews.length;
final int viewTypeCount = mViewTypeCount;
final ArrayList<View>[] scrapViews = mScrapViews;
for (int i = 0; i < viewTypeCount; ++i) {
final ArrayList<View> scrapPile = scrapViews[i];
int size = scrapPile.size();
final int extras = size - maxViews;
size--;
for (int j = 0; j < extras; j++) {
removeDetachedView(scrapPile.remove(size--), false);
}
}
}该方法解释为：mScrapView中每个ScrapView数组大小不应该超过mActiveView的大小，如果超过，系统认为程序并没有复用convertView，而是每次都是创建一个新的view，为了避免产生大量的闲置内存且增加OOM的风险，系统会在每次回收后，去检查一下，将超过的部分释放掉，节约内存降低OOM风险。
3.2.12 reclaimScrapViews
/**
* Puts all views in the scrap heap into the supplied list.
*/
void reclaimScrapViews(List<View> views) {
if (mViewTypeCount == 1) {
views.addAll(mCurrentScrap);
} else {
final int viewTypeCount = mViewTypeCount;
final ArrayList<View>[] scrapViews = mScrapViews;
for (int i = 0; i < viewTypeCount; ++i) {
final ArrayList<View> scrapPile = scrapViews[i];
views.addAll(scrapPile);
}
}
}将mScrapView中所有的缓存view全部添加到指定的view list中，只看到有AbsListView.reclaimViews有调用到，但没有其它方法使用这个函数，可能在特殊情况下会使用到，但目前从framework中，看不出来。
3.2.13 setCacheColorHint
/**
* Updates the cache color hint of all known views.
*
* @param color The new cache color hint.
*/
void setCacheColorHint(int color) {
if (mViewTypeCount == 1) {
final ArrayList<View> scrap = mCurrentScrap;
final int scrapCount = scrap.size();
for (int i = 0; i < scrapCount; i++) {
scrap.get(i).setDrawingCacheBackgroundColor(color);
}
} else {
final int typeCount = mViewTypeCount;
for (int i = 0; i < typeCount; i++) {
final ArrayList<View> scrap = mScrapViews[i];
final int scrapCount = scrap.size();
for (int j = 0; j < scrapCount; j++) {
scrap.get(j).setDrawingCacheBackgroundColor(color);
}
}
}
// Just in case this is called during a layout pass
final View[] activeViews = mActiveViews;
final int count = activeViews.length;
for (int i = 0; i < count; ++i) {
final View victim = activeViews[i];
if (victim != null) {
victim.setDrawingCacheBackgroundColor(color);
}
}
}该方法就是为所有的view绘置它们的背景色。
四、总结
通过分析Adapter, BaseAdapter之间的关系，以及分析RecycleBin里面的方法，和对应使用的情况，我想，大家应该也很清楚了。RecycleBin是一个很重要的类，学习了这个类，无论是我们通过ListView 或 GridView来间接使用它，还是将来自己写控件时，需要考虑到复用view时，都很有帮助。
ListView, GridView 以及 AbsListView 包括它们的parent都是很复杂的，我们不能一头埋进去，否则你会发现无从下手，我们只能通过一些关键的类，接口或方法，来找到突破口，理解了这些代码，再去看整个类时，你会发现，其实没那么神秘，甚至有些地方我们都可以联想到情景。
好了，暂时就这么多，当然，对ListView的分析仍未结束，因为，我们只是了解了它的VIEW的添加，删除机制，但它如何与用户交互（即Touch，Scroll，Fling，Click, LongClick等）都未分析，大家可以尝试着去看看，我会在之后的时间里，慢慢的带领大家一起学习，分析。
有什么不对的地方，或是值得大家分析，讨论的，也欢迎大家积极留言，谢谢！
3862
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
