AXIS2C启动虚拟机示例
创建WSDL文件
创建eucalyptusNC.wsdl
<?xml version="1.0" encoding="utf-8"?>
<!-- Copyright 2003-2004 The Apache Software Foundation. -->
<!-- (c) Copyright IBM Corp. 2004, 2005 All Rights Reserved -->
<!-- -->
<!-- Licensed under the Apache License, Version 2.0 (the "License"); -->
<!-- you may not use this file except in compliance with the License. -->
<!-- You may obtain a copy of the License at -->
<!-- -->
<!-- http://www.apache.org/licenses/LICENSE-2.0 -->
<!-- -->
<!-- Unless required by applicable law or agreed to in writing, software -->
<!-- distributed under the License is distributed on an "AS IS" BASIS, -->
<!-- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -->
<!-- See the License for the specific language governing permissions and -->
<!-- limitations under the License. -->
<wsdl:definitions targetNamespace="http://localhost/axis/eucalyptusNC" xmlns:apachesoap="http://xml.apache.org/xml-soap" xmlns:impl="http://localhost/axis/eucalyptusNC" xmlns:intf="http://localhost/axis/eucalyptusNC" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:wsdlsoap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<wsdl:types>
<schema elementFormDefault="qualified" targetNamespace="http://localhost/axis/eucalyptusNC" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:apachesoap="http://xml.apache.org/xml-soap" xmlns:impl="http://localhost/axis/eucalyptusNC" xmlns:intf="http://localhost/axis/eucalyptusNC" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
<element name="ncRunInstance">
<complexType>
<sequence>
<element name="cmd" type="xsd:string"/>
</sequence>
</complexType>
</element>
<element name="ncRunInstanceResponse">
<complexType>
<sequence>
<element name="result" type="xsd:string" />
</sequence>
</complexType>
</element>
</schema>
</wsdl:types>
<wsdl:message name="ncRunInstance">
<wsdl:part element="impl:ncRunInstance" name="parameters"/>
</wsdl:message>
<wsdl:message name="ncRunInstanceResponse">
<wsdl:part element="impl:ncRunInstanceResponse" name="parameters"/>
</wsdl:message>
<wsdl:portType name="eucalyptusNC">
<wsdl:operation name="ncRunInstance">
<wsdl:input message="impl:ncRunInstance" name="ncRunInstance"/>
<wsdl:output message="impl:ncRunInstanceResponse" name="ncRunInstanceResponse"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="eucalyptusNCSoapBinding" type="impl:eucalyptusNC">
<wsdlsoap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="ncRunInstance">
<wsdlsoap:operation soapAction="eucalyptusNC#ncRunInstance"/>
<wsdl:input name="ncRunInstance">
<wsdlsoap:body use="literal"/>
</wsdl:input>
<wsdl:output name="ncRunInstanceResponse">
<wsdlsoap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="eucalyptusNC">
<wsdl:port binding="impl:eucalyptusNCSoapBinding" name="eucalyptusNC">
<wsdlsoap:address location="http://localhost/axis/eucalyptusNC"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
配置环境变量
AXIS2_HOME为axi2的放置目录
AXIS2C_HOME为axis2c的安装目录
| export AXIS2_HOME=/home/eucalyptus-src-deps/axis2-1.4/ export AXIS2C_HOME=/usr/local/axis2c/ export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/axis2c/lib/ export PATH=$PATH:/usr/local/axis2c/bin/tools/wsdl2c/ |
生成服务端代码
sh WSDL2C.sh -uri eucalyptusNC.wsdl -sd -ss -d adb -u -f -o server
在axis2_skel_eucalyptusNC.c文件adb_ncRunInstanceResponse_t* axis2_skel_eucalyptusNC_ncRunInstance (const axutil_env_t *env ,
adb_ncRunInstance_t* ncRunInstance )
函数中添加如下代码
|
adb_ncRunInstanceResponse_t* ref=NULL; char *cmd; cmd=strdup(adb_ncRunInstance_get_cmd(ncRunInstance,env)); printf("cmd :%s/n",cmd); ref=adb_ncRunInstanceResponse_create(env); RunInstances(); adb_ncRunInstanceResponse_set_result(ref,env,"Pending...");
return ref; |
其中RunInstances();包含在RunInstances.h头文件中，这个文件是启动虚拟机的代码
RunInstances.h源码如下：
#include <stdio.h>
#include <stdlib.h>
#include <libvirt/libvirt.h>
void closeConn(virConnectPtr conn)
{
if(conn!=NULL)
virConnectClose(conn);
}
int RunInstances()
{
virConnectPtr conn=NULL;
virDomainPtr dom=NULL;
conn=virConnectOpen("");
if(conn==NULL)
{
fprintf(stderr,"Fail To Connect Hypervisor/n");
return 1;
}
const char *xmlconfig="<domain type='xen' id='18'>/
<name>i-52C5093E</name>/
<os>/
<type>linux</type>/
<kernel>/var/lib/xen/images/kernel</kernel>/
<initrd>/var/lib/xen/images/ramdisk</initrd>/
<root>/dev/sda1</root>/
<cmdline> ro</cmdline>/
</os>/
<memory>524288</memory>/
<vcpu>1</vcpu>/
<devices>/
<disk type='file'>/
<source file='/var/lib/xen/images/root'/>/
<target dev='sda1'/>/
</disk>/
<interface type='bridge'>/
<source bridge='xenbr0'/>/
<mac address='d0:0d:52:C5:09:3E'/>/
<script path='/etc/xen/scripts/vif-bridge'/>/
</interface>/
</devices>/
</domain>";
dom=virDomainDefineXML(conn,xmlconfig);
if (!dom)
{
fprintf(stderr, "Domain definition failed");
return 1;
}
if (virDomainCreate(dom) < 0)
{
virDomainFree(dom);
fprintf(stderr, "Cannot boot guest");
return 1;
}
fprintf(stderr, "Guest %s has booted/n", virDomainGetName(dom));
virDomainFree(dom);
return 0;
}
这个文件启动的虚拟机的镜像文件来自eucalyptus推荐的IMG，放在/var/lib/xen/images/root
这里为了方便，省去了两个空白文件，太大了而且是空文件，所以没考过来
编译服务器代码生成.so文件
| gcc -g -fPIC -shared -olibeucalyptusNC.so -I $AXIS2C_HOME/include/axis2-1.6.0/ -Isrc -L$AXIS2C_HOME/lib -laxutil -laxis2_axiom -laxis2_engine -laxis2_parser -lpthread -laxis2_http_sender -laxis2_http_receiver -lguththila -lvirt server/*.c |
在axis2c的服务器文件夹下新建一个eucalyptusNC文件夹，并将生成的libeucalyptusNC.so和server.xml文件拷到这个文件夹下，然后启动服务器
生成客户端代码
sh WSDL2C.sh -uri eucalyptusNC.wsdl -g -ss -d adb -u -f -o client
将文件eucalyptusNC.c拷到client文件夹中
eucalyptusNC.c中代码如下
#include "axis2_stub_eucalyptusNC.h"
int main(int argc,char *argv)
{
axutil_env_t * env = NULL;
axis2_char_t * operation = NULL;
axis2_char_t * client_home = NULL;
axis2_char_t * endpoint_uri = NULL;
axis2_stub_t * stub = NULL;
adb_ncRunInstanceResponse_t* ref=NULL;
adb_ncRunInstance_t* sent=NULL;
char val[]="ncRunInstance";
char ref_val[20] ;
endpoint_uri = "http://10.51.3.88:9090/axis2/services/eucalyptusNC";
env = axutil_env_create_all("alltest.log", AXIS2_LOG_LEVEL_TRACE);
/* Set up deploy folder. */
client_home = AXIS2_GETENV("AXIS2C_HOME");
if (!client_home)
client_home = "../../../deploy";
stub=axis2_stub_create_eucalyptusNC(env,client_home,endpoint_uri);
sent=adb_ncRunInstance_create(env);
adb_ncRunInstance_set_cmd(sent,env,val);
int s=0;
ref= axis2_stub_op_eucalyptusNC_ncRunInstance(stub,env,sent);
if (!ref)
{
printf("Error: response NULL/n");
return -1;
}
printf("Result:%s /n", adb_ncRunInstanceResponse_get_result(ref, env));
return 0;
}
其中有一行endpoint_uri = "http://10.51.3.88:9090/axis2/services/eucalyptusNC";这行代表服务器的地址，设置这个可以设置服务器的地址
生成客户端可执行文件
|
gcc -o eucalyptusNC -I$AXIS2C_HOME/include/axis2-1.6.0/ -L$AXIS2C_HOME/lib -laxutil -laxis2_axiom -laxis2_parser -laxis2_engine -lpthread -laxis2_http_sender -laxis2_http_receiver client/*.c -ldl -Wl,--rpath -Wl,$AXIS2C_HOME/lib |
配置好环境变量运行客户端
将上面列子嵌入到eclipse工程
将上面server和client文件更名为eucalyptusNC和eucalyptusNCClient拷贝到eclipse工程文件夹下
用eclipse工程文件生成libeucalyptusNC.so
1. 新建一个C动态库项目eucalyptusNC，如下：
2. 设置环境变量
将“axis2c的安装目录”/include/axis2-1.6.0
“axis2c的安装目录”/include/axis2-1.6.0/platforms
“axis2c的安装目录”/include/axis2-1.6.0/platforms/unix 包含进来
将“axis2c的安装目录”/lib包含到库中
3. 设置编译规则
在GCC C Compiler 选择下的Optimization栏右边添加-fPIC命令
在GCC C Linker command中添加gcc -laxutil -laxis2_axiom -laxis2_engine -laxis2_parser -lpthread -laxis2_http_sender -laxis2_http_receiver -lguththila -lvirt
编译工程得到libeucalyptusNC.so
生成客户端可执行文件
生成客户端可执行文件和上面步骤相似，只是建立的是一个可执行工程，在编译选项中不需要加-fPIC选项即可
1269
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
