HCIP第十三天MPLS实验

我是一颗纠缠

于 2021-02-01 00:08:46 发布

阅读量171

点赞数

本文链接：https://blog.csdn.net/qq980040569/article/details/113487630

版权

在这里插入图片描述
规划IP地址

先在R2 3 4上配置
[R2]INT L0
[R2-LoopBack0]ip add 2.2.2.2 24
[R2-LoopBack0]int g0/0/1
[R2-GigabitEthernet0/0/1]ip add 12.1.1.1 24

[r3]int l0
[r3-LoopBack0]ip add 3.3.3.3 24
[r3-LoopBack0]int g0/0/0
[r3-GigabitEthernet0/0/0]ip add 12.1.1.2 24
[r3-GigabitEthernet0/0/0]int g0/0/1
[r3-GigabitEthernet0/0/1]ip add 23.1.1.1 24

[r4]int l0
[r4-LoopBack0]ip add 4.4.4.4 24
[r4-LoopBack0]int g0/0/0
[r4-GigabitEthernet0/0/0]ip add 23.1.1.2 24

在R2 3 4上配置ospf
[R2]ospf 1 router-id 2.2.2.2
[R2-ospf-1]area 0
[R2-ospf-1-area-0.0.0.0]network 2.2.2.2 0.0.0.0
[R2-ospf-1-area-0.0.0.0]network 12.1.1.1 0.0.0.0

[r3]ospf 1 router-id 3.3.3.3
[r3-ospf-1]area 0
[r3-ospf-1-area-0.0.0.0]network 3.3.3.3 0.0.0.0
[r3-ospf-1-area-0.0.0.0]network 12.1.1.2 0.0.0.0
[r3-ospf-1-area-0.0.0.0]network 23.1.1.1 0.0.0.0

[r4]ospf 1 router-id 4.4.4.4
[r4-ospf-1]area 0
[r4-ospf-1-area-0.0.0.0]network 4.4.4.4 0.0.0.0
[r4-ospf-1-area-0.0.0.0]network 23.1.1.2 0.0.0.0

R3查表
在这里插入图片描述
在R2上检测
在R2 3 4上配置mpls

[R2]mpls lsr-id 2.2.2.2
[R2]mpls
Info: Mpls starting, please wait… OK!
[R2-mpls]mpls ldp
[R2-mpls-ldp]int g0/0/1
[R2-GigabitEthernet0/0/1]mpls
[R2-GigabitEthernet0/0/1]mpls ldp

[r3]mpls lsr-id 3.3.3.3
[r3]mpls
Info: Mpls starting, please wait… OK!
[r3-mpls]mpls ldp
[r3-mpls-ldp]int g0/0/0
[r3-GigabitEthernet0/0/0]mpls
[r3-GigabitEthernet0/0/0]mpls ldp
[r3-GigabitEthernet0/0/0]int g0/0/1
[r3-GigabitEthernet0/0/1]mpls
[r3-GigabitEthernet0/0/1]mpls ldp

[r4]mpls lsr-id 4.4.4.4
[r4]mpls
Info: Mpls starting, please wait… OK!
[r4-mpls]mpls ldp
[r4-mpls-ldp]int g0/0/0
[r4-GigabitEthernet0/0/0]mpls
[r4-GigabitEthernet0/0/0]mpls ldp
在这里插入图片描述
在R2创建vpn
[R2]ip vpn-instance a
[R2-vpn-instance-a]ipv4-family
[R2-vpn-instance-a-af-ipv4]route-distinguisher 1:1
[R2-vpn-instance-a-af-ipv4]vpn-target 1:1
[R2-vpn-instance-a-af-ipv4]int g0/0/0
[R2-GigabitEthernet0/0/0]ip binding vpn-instance a
[R2-GigabitEthernet0/0/0]ip add 192.168.2.2 24
[R2-GigabitEthernet0/0/0]q
[R2]ip vpn-instance b
[R2-vpn-instance-b]ipv4-family
[R2-vpn-instance-b-af-ipv4]route-distinguisher 2:2
[R2-vpn-instance-b-af-ipv4]vpn-target 2:2
[R2-vpn-instance-b-af-ipv4]int g0/0/2
[R2-GigabitEthernet0/0/2]ip binding vpn-instance b
[R2-GigabitEthernet0/0/2]ip add 192.168.2.2 24

在R1配置地址
[r1]int l0
[r1-LoopBack0]ip add 192.168.1.1 24
[r1-LoopBack0]int g0/0/1
[r1-GigabitEthernet0/0/1]ip add 192.168.2.1 24

在R2测试
在这里插入图片描述
在R4创建vpn
[r4]ip vpn-instance a
[r4-vpn-instance-a]ipv4-family
[r4-vpn-instance-a-af-ipv4]route-distinguisher 1:1
[r4-vpn-instance-a-af-ipv4]vpn-target 1:1
[r4-vpn-instance-a-af-ipv4]int g0/0/1
[r4-GigabitEthernet0/0/1]ip binding vpn-instance a
[r4-GigabitEthernet0/0/1]ip add 192.168.3.1 24
[r4-GigabitEthernet0/0/1]q
[r4]ip vpn-instance b
[r4-vpn-instance-b]ipv4-family
[r4-vpn-instance-b-af-ipv4]route-distinguisher 2:2
[r4-vpn-instance-b-af-ipv4]vpn-target 2:2
[r4-vpn-instance-b-af-ipv4]int g0/0/2
[r4-GigabitEthernet0/0/2]ip binding vpn-instance b
[r4-GigabitEthernet0/0/2]ip add 192.168.3.1 24

在R5配置地址
[r5]int l0
[r5-LoopBack0]ip add 192.168.4.1 24
[r5-GigabitEthernet0/0/0]ip add 192.168.3.2 24

测试在这里插入图片描述
R6 7地址配置同R1 5，但R7环回为4.2
配完测试

在R2 4配置bgp
[R2]bgp 1
[R2-bgp]router-id 2.2.2.2
[R2-bgp]peer 4.4.4.4 as-number 1
[R2-bgp]peer 4.4.4.4 connect-interface LoopBack 0
[R2-bgp]ipv4-family vpnv4
[R2-bgp-af-vpnv4]peer 4.4.4.4 enable

[r4]bgp 1
[r4-bgp]router-id 4.4.4.4
[r4-bgp]peer 2.2.2.2 as-number 1
[r4-bgp]peer 2.2.2.2 connect-interface LoopBack 0
[r4-bgp]ipv4-family vpnv4
[r4-bgp-af-vpnv4]peer 2.2.2.2 enable

R1 5利用静态
[r1]ip route-static 192.168.3.0 24 192.168.2.2
[r1]ip route-static 192.168.4.0 24 192.168.2.2

[R2]ip route-static vpn-instance a 192.168.1.0 24 192.168.2.1

在这里插入图片描述
[r5]ip route-static 192.168.1.0 24 192.168.3.1
[r5]ip route-static 192.168.2.0 24 192.168.3.1