超级会员免费看
在运行Fluent时遇到了无法打开输入文件的错误，错误信息为'sopeninputfile: unable to open file for input'，文件路径为'D:/cfd/CFD-course/VMFL023/case2/case2-all-quad-mesh.msh.cas'。此外，还出现了一系列的警告和错误，包括FFT处理信号时的不一致采样间隔问题以及MPI接受连接失败的错误，导致无法正常启动并运行Fluent。
fluent出现了下面错误会导致无法读取mesh文件。
The fl process could not be started.
Error: sopeninputfile: unable to open file for input
Error Object: "D:/cfd/CFD-course/VMFL023/case2/case2-all-quad-mesh.msh.cas"
Reading "D:/cfd/CFD-course/VMFL023/case-new/lift.xy"...
Warning: Read_Signal: FFT can handle a constant sampling interval only!
Jump in sampling interval at sample number 10223 is more than 1 percent!
Reading "D:/cfd/CFD-course/VMFL023/case-new/lift.xy"...
Warning: Read_Signal: FFT can handle a constant sampling interval only!
Jump in sampling interval at sample number 10223 is more than 1 percent!
Reading "D:/cfd/CFD-course/VMFL023/case-new/lift.xy"...
Warning: Read_Signal: FFT can handle a constant sampling interval only!
Jump in sampling interval at sample number 10223 is more than 1 percent!<
订阅专栏 解锁全文
231
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
