我最近在搭建一个网站,
我是在阿里云上租了一个小型低配的主机(真的很低配,1G内存,单核,1M带宽)没钱租得起好的服务器就这样-_-
因为我要提供网页访问服务,还有文件上传功能,所以我要在主机上开启httpd和vsftpd的服务。但是由于这两个服务不是开机启动的,所以每次重启机子后还有再开启这两个服务,实在很烦。然后我记得鸟哥的教材里有专门讲到这一张,于是就翻开的了我的葵花宝典——《鸟哥的私房菜》,查找相关的内容。
鸟哥是以centOS 5.X为例,运用的是chkconfig的命令来设置开机启动,然后我使用该命令的时候,有下面的提示:
提示:Forwarding request to 'systemctl enable httpd.service'。
难道一定要 用systemclt命令么?于是就查找各种资料,在网上论坛间逛啊,找到了一篇很不错的文章来讲这两者的区别
以下就是说明(转载):
任务 | 旧指令 | 新指令 |
使某服务自动启动 | chkconfig --level 3 httpd on | systemctl enable httpd.service |
使某服务不自动启动 | chkconfig --level 3 httpd off | systemctl disable httpd.service |
检查服务状态 | service httpd status | systemctl status httpd.service (服务详细信息) systemctl is-active httpd.service (仅显示是否 Active) |
显示所有已启动的服务 | chkconfig --list | systemctl list-units --type=service |
启动某服务 | service httpd start | systemctl start httpd.service |
停止某服务 | service httpd stop | systemctl stop httpd.service |
重启某服务 | service httpd restart | systemctl restart httpd.service |
下面以nfs服务为例:
1.启动nfs服务
systemctl start nfs-server.service
2.设置开机自启动
systemctl enable nfs-server.service
3.停止开机自启动
systemctl disable nfs-server.service
4.查看服务当前状态
systemctl status nfs-server.service
5.重新启动某服务
systemctl restart nfs-server.service
6.查看所有已启动的服务
systemctl list -units --type=service
开启防火墙22端口
iptables -I INPUT -p tcp --dport 22 -j ACCEPT
如果仍然有问题,就可能是SELinux导致的
关闭SElinux:
修改/etc/selinux/config文件中的SELINUX=”” 为 disabled,然后重启
彻底关闭防火墙:
sudo systemctl status firewalld.service sudo systemctl stop firewalld.service sudo systemctl disable firewalld.service
这篇文章的作者讲的很清楚,其实syetemclt就是service和chkconfig这两个命令的整合,在CentOS 7就开始被使用了。
嗯,个人觉得这个命令确实挺不错的,挺方便、又好记。所以,做个笔记学习下!