1.首先让电脑主机和设备(手机)链接到同一个局域网
2.先用usb线链接手机,查看设备网络地址参数,然后设置参数
2.1 adb shell ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope: Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1
RX bytes:0 TX bytes:0
wlan0 Link encap:Ethernet HWaddr cc:4b:73:1d:76:d8
inet addr:172.20.10.11 Bcast:172.20.10.15 Mask:255.255.255.240
inet6 addr: fe80::ce4b:73ff:fe1d:76d8/64 Scope: Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:580 errors:0 dropped:0 overruns:0 frame:0
TX packets:605 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:90226 TX bytes:70272
eth0 Link encap:Ethernet HWaddr 8e:db:86:0e:01:f7
inet6 addr: fe80::8cdb:86ff:fe0e:1f7/64 Scope: Link
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 TX bytes:508
Interrupt:24
2.2adb tcpip 5555 //此时,应该usb已经链接不上adb了
adb connect 链接ip
2.3 adb connect 172.20.10.11
eg:
zwl@zwl:FireNow-Nougat$ adb connect 172.20.10.11
already connected to 172.20.10.11:5555 //之前已经链接过了
从这里之后,就可以像链接usb线一样,正常执行adb 命令了
zwl@zwl:FireNow-Nougat$ adb shell
rk3399_firefly_box:/ $