Bug搬运工-CSCvg37458:ISR4K goes into booting loop with “flash:“ in boot statement

ISR4K升级的时候要注意了!

很可能会碰到如下的问题:

ISR4K goes into booting loop with "flash:" in boot statement
CSCvg37458
Description
Symptom:
ISR4K configured with a boot statement pointing to the "flash:" directory will get stuck in a boot loop.

Boot statement will look similar to:
boot system flash:image.bin

When rebooting, the console will show:

Last reset cause: LocalSoft
ISR4331/K9 platform with 4194304 Kbytes of main memory


........

Device not found flash:

........

autoboot: boot failed, restarting...

Conditions:
Boot statement will explicitly point to "flash" instead of "bootflash" despite being the same directory.
This issue occurs in all version (for instance: 3.16.X to 3.17.X or 16.X, 16.X to 16.Y, 16.X to 3.X).

below boot up statements will trigger the failure

boot system flash:image-name
boot system flash flash:image-name

Workaround:
from rommon mode, manually boot up the image. for example:

rommon> boot bootflash:image-name

Another workaround requires modifying the boot system configuration as follows:

boot system bootflash:image-name.bin

Notice the semicolon was removed between the flash and image-name.bin. ROMMON will check its flash device for the image-name.bin. For the ISR4K platforms, the flash device is the bootflash:.

Further Problem Description:
below IOS boot up statements work:

boot system bootflash:image-name
boot system flash bootflash:image-name

this is fixed at ROMMON release 16.9(1r).
Last Modified:
Nov 21,2019
Status:
Fixed
Severity:
3 Moderate

Product:
(1)
Cisco 4000 Series Integrated Services Routers
Known Affected Releases:
(4)
15.5(3)S6.1
15.6(1)S
Denali-16.3.4
Everest-16.6.1

评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

剪刀石头布Cheers

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付:¥1
获取中
扫码支付

您的余额不足,请更换扫码支付或充值

打赏作者

实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值