Channel a: DDR3 400MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel b: DDR3 400MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Memory OK
Memory OK
OUT
U-Boot 2014.10-RK3288-10 (Nov 18 2020 - 15:06:40)
CPU: rk3288
cpu version = 0
CPU’s clock information:
arm pll = 600000000HZ
periph pll = 297000000HZ
ddr pll = 396000000HZ
codec pll = 384000000HZ
Board: Rockchip platform Board
DRAM: Found dram banks: 1
Adding bank:0000000000000000(0000000080000000)
128 MiB
GIC CPU mask = 0x00000001
SdmmcInit = 0 400
SdmmcInit = 2 0
storage init OK!
Using default environment
GetParam
Load FDT from resource image.
power key: bank-0 pin-5
pmic:rk808
can’t find dts node for pwm1
set pwm voltage ok,pwm_id =1 vol=1000000,pwm_value=84
SecureBootEn = 0, SecureBootLock = 0
#Boot ver: 2020-11-18#2.30
empty serial no.
checkKey
vbus = 1
no fuel gauge found
no fuel gauge found
read logo on state from dts [1]
pll_src = 0, dclk_hz = 133000000, dclk_div = 3
no fuel gauge found
got recovery cmd from misc.
load fdt from resouce.
Secure Boot state: 0
kernel @ 0x02000000 (0x006e3db8)
ramdisk @ 0x05bf0000 (0x002ba04c)
bootrk: do_bootm_linux…
Loading Device Tree to 05600000, end 0561b9b1 … OK
Add bank:0000000000000000, 0000000080000000
Starting kernel …
每次都会进入recovery
uboot下取消:
diff --git a/include/configs/rk32plat.h b/include/configs/rk32plat.h
index a68f4be…1d4ec9e 100755
— a/include/configs/rk32plat.h
+++ b/include/configs/rk32plat.h
@@ -251,7 +251,7 @@
#define CONFIG_SYSTEM_ON_VOL_THRESD 0
/******** pwm regulator driver ********/
-#define CONFIG_POWER_PWM_REGULATOR
+/#define CONFIG_POWER_PWM_REGULATOR/
/******** pmic driver ********/
#ifdef CONFIG_POWER_PMIC