1. vimown项目介绍
- Github项目 vimown
该项目是本人基于开源vimplus开源项目改编，使其打造一套更加适合自身开发使用的vim文本编辑器。主要更改为vimrc文件以及部分插件。
刚开始工作，主要是在虚拟机开发环境，ubuntu中适合自己的代码编辑器比较少。开始使用sourcelight, 时常卡死，十分不舒服。在组内leader影响下，开始接触vim。当时对我leader很是膜拜。不过刚开始使用vim的时候十分难受，学习曲线特别长。都是自己手动去下载插件，自己去研究配置文件，很多指令都不熟悉，每次换一个环境，都需要配置vim半天。不过在后面越来越习惯，使用起来特别舒服，敲代码十分顺畅，速度特别快。
工作前三年，开发工具都是选择vim，现在使用vim的人很少了，连一些基本的指令都不熟悉，可能是因为学习曲线确实长，并且没有一个好师傅教，摸索太难。后面我了解到vimplus, 安装流程方便不少，不过使用起来不是很顺畅。本着极客精神，自己又在上面融合个人习惯，fork出vimown。
2. vimown安装
mkdir vimown
cd vimown
git clone https://github.com/ByteXiaoTang/vimown.git .
./install.sh
-
如果之前安装过vimown, 如下
-
安装成功标记
-
因为此处不太完美, 安装后执行, 为了代码查找时生成的tags可以被查阅，需要执行
sudo apt-get global
sudo apt-get install vim
如果遇到源的问题，请及时vi /etc/apt/sources.list，并更新国内可用源
个人更加喜欢安装的是gvim。配置使用上没有区别-
插件安装
由于部分插件可能安装失败，打开gvim/vim之后，进行插件更新。
输入：PlugUpdate
由于国内的原因，github上一些资源经常装不上，需要多次尝试PlugUpdate.配置一共29个插件， 有些应用的特别少。
- 插件更改
visualmark.vim插件需要一些更改，才能完整使用使用mm.mn,mp来进行标签的切换。配合ctrl+f和ctrl+b。使得vim查阅代码更加流畅
-
linux终端配色方案（可参考）
PS1=‘KaTeX parse error: Expected '}', got 'EOF' at end of input: …ebian_chroot:+(debian_chroot)}[\033[01;35;01m]\u[\033[00;00;01m]@[\033[01;35;01m]\h[\033[00;31;01m]:[\033[00;00;01m]\w [\033[01;32;01m]$ [\033[01;01;01m]’
在~/.bashrc中添加PSI
3. vimrc分析
- vimrc文件为自身配置，目录在~/.vimrc.当然其他地方也有，因为是软连接。
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" 通用设置
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
let mapleader = "," " 定义<leader>键
set nocompatible " 设置不兼容原始vi模式
" filetype on " 设置开启文件类型侦测
" filetype plugin on " 设置加载对应文件类型的插件
set noeb " 关闭错误的提示
"syntax enable " 开启语法高亮功能
syntax on " 自动语法高亮
set t_Co=256 " 开启256色支持
set cmdheight=2 " 设置命令行的高度
set showcmd " select模式下显示选中的行数
set ruler " 总是显示光标位置
set laststatus=2 " 总是显示状态栏
set number " 开启行号显示
set cursorline " 高亮显示当前行
set whichwrap+=<,>,h,l " 设置光标键跨行
set ttimeoutlen=0 " 设置<ESC>键响应时间
set virtualedit=block,onemore " 允许光标出现在最后一个字符的后面
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" 代码缩进和排版
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
set autoindent " 设置自动缩进
set cindent " 设置使用C/C++语言的自动缩进方式
set cinoptions=g0,:0,N-s,(0 " 设置C/C++语言的具体缩进方式
set smartindent " 智能的选择对其方式
filetype indent on " 自适应不同语言的智能缩进
set expandtab " 将制表符扩展为空格
set tabstop=4 " 设置编辑时制表符占用空格数
set shiftwidth=4 " 设置格式化时制表符占用空格数
set softtabstop=4 " 设置4个空格为制表符
"tmz
"set smarttab " 在行和段开始处使用制表符
"set nowrap " 禁止折行
set backspace=2 " 使用回车键正常处理indent,eol,start等
set sidescroll=10 " 设置向右滚动字符数
"tmz 2019/12/26
"set nofoldenable " 禁用折叠代码
set foldenable
set foldmethod=syntax
set foldlevel=100
set foldcolumn=4
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" 代码补全
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
set wildmenu " vim自身命名行模式智能补全
set completeopt-=preview " 补全时不显示窗口，只显示补全列表
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" 搜索设置
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
set hlsearch " 高亮显示搜索结果
set incsearch " 开启实时搜索功能
set ignorecase " 搜索时大小写不敏感
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" 缓存设置
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
set nobackup " 设置不备份
set noswapfile " 禁止生成临时文件
set autoread " 文件在vim之外修改过，自动重新读入
set autowrite " 设置自动保存
set confirm " 在处理未保存或只读文件的时候，弹出确认
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" 编码设置
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
set langmenu=zh_CN.UTF-8
set helplang=cn
set termencoding=utf-8
set encoding=utf8
set fileencodings=utf8,ucs-bom,gbk,cp936,gb2312,gb18030
"tmz
autocmd InsertLeave *set nocul
autocmd InsertEnter *se cul
set mouse=a
"?禁止光标闪烁
set gcr=a:block-blinkon0
set history=100
"空格
highlight WhitespaceEOL ctermbg=red guibg=red
match WhitespaceEOL /\s\+$/
nnoremap <leader><space> :%s/\s*$//g <cr>
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" gvim/macvim设置
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
if has("gui_running")
let system = system('uname -s')
if system == "Darwin\n"
set guifont=Droid\ Sans\ Mono\ Nerd\ Font\ Complete:h18 " 设置字体
else
set guifont=DroidSansMono\ Nerd\ Font\ Regular\ 11 " 设置字体
endif
set guioptions-=m " 隐藏菜单栏
set guioptions-=T " 隐藏工具栏
set guioptions-=L " 隐藏左侧滚动条
set guioptions-=r " 隐藏右侧滚动条
set guioptions-=b " 隐藏底部滚动条
" set showtabline=0 " 隐藏Tab栏
"set guicursor=n-v-c:ver5 " 设置光标为竖线
set guicursor=n-v-c:block-Cursor/lCursor,i-ci-r-cr:ver25-Cursor/lCursor,a:blinkon0
endif
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" 卸载默认插件UnPlug
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
function! s:deregister(repo)
let repo = substitute(a:repo, '[\/]\+$', '', '')
let name = fnamemodify(repo, ':t:s?\.git$??')
call remove(g:plugs, name)
endfunction
command! -nargs=1 -bar UnPlug call s:deregister(<args>)
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" 插件列表
"""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
call plug#begin('~/.vim/plugged')
"tmz 2019/12/25"
"Plug 'chxuan/vim-edit'
"Plug 'chxuan/change-colorscheme'
"Plug 'easymotion/vim-easymotion'
"Plug 'haya14busa/incsearch.vim'
"Plug 'tpope/vim-repeat'
"Plug 'tpope/vim-endwise'
"Plug 'tpope/vim-fugitive'
"Plug 'junegunn/vim-slash'
Plug 'tpope/vim-fugitive'
"Plug 'kana/vim-textobj-user'
"Plug 'kana/vim-textobj-indent'
"Plug 'kana/vim-textobj-syntax'
"Plug 'kana/vim-textobj-function'
"Plug 'sgur/vim-textobj-parameter'
"Plug 'Shougo/echodoc.vim'
"Plug 'rhysd/clever-f.vim'
"Plug 'mileszs/ack.vim'
"让翻页更加流畅
Plug 'terryma/vim-smooth-scroll'
"Plug 'chxuan/cpp-mode'
Plug 'chxuan/vim-buffer'
"Plug 'chxuan/prepare-code'
"Plug 'chxuan/vimplus-startify'
Plug 'mhinz/vim-startify'
Plug 'chxuan/tagbar'
Plug 'Valloric/YouCompleteMe'
Plug 'rdnetto/YCM-Generator'
Plug 'Yggdroot/LeaderF'
Plug 'jiangmiao/auto-pairs'
Plug 'scrooloose/nerdtree'
" Plug 'tiagofumo/vim-nerdtree-syntax-highlight'
" Plug 'Xuyuanp/nerdtree-git-plugin'
Plug 'godlygeek/tabular'
Plug 'tpope/vim-surround'
Plug 'tpope/vim-commentary'
"Plug 'scrooloose/nerdcommenter'
"高亮C++的部分关键字和标准库
Plug 'octol/vim-cpp-enhanced-highlight'
Plug 'vim-airline/vim-airline'
Plug 'vim-airline/vim-airline-themes'
Plug 'ryanoasis/vim-devicons'
Plug 'junegunn/gv.vim'
Plug 'vim-scripts/indentpython.vim'
Plug 'docunext/closetag.vim'
""tmz 2019/12/26"
Plug 'universal-ctags/ctags'
Plug 'ervandew/supertab'
Plug 'itfootman/bufexplorer'
"Plug 'a.vim'
Plug 'easlee/vim-visualmark'
Plug 'plasticboy/vim-markdown'
Plug 'suan/vim-instant-markdown'
" 加载自定义插件
if filereadable(expand($HOME . '/.vimrc.custom.plugins'))
source $HOME/.vimrc.custom.plugins
endif
""tmz 2019/12/26"
set tags=./.tags;,.tags
if version >= 800
Plug 'ludovicchabant/vim-gutentags'
Plug 'skywind3000/gutentags_plus'
" gutentags 搜索工程目录的标志，当前文件路径向上递归直到碰到这些文件/目录名
let g:gutentags_project_root = ['.root', '.svn', '.git', '.hg', '.project']
"add bt myself 0503
"let g:gutentags_exclude_project_root = [expand('~/.vim')]
" 所生成的数据文件的名称
let g:gutentags_ctags_tagfile = '.tags'
" 同时开启 ctags 和 gtags 支持：
let g:gutentags_modules = []
if executable('ctags')
let g:gutentags_modules += ['ctags']
endif
if executable('gtags-cscope') && executable('gtags')
let g:gutentags_modules += ['gtags_cscope']
endif
" 将自动生成的 ctags/gtags 文件全部放入 ~/.cache/tags 目录中，避免污染工程目录
let g:gutentags_cache_dir = expand('~/.cache/tags')
" 配置 ctags 的参数
let g:gutentags_ctags_extra_args = ['--fields=+niazS', '--extra=+q']
let g:gutentags_ctags_extra_args += ['--c++-kinds=+px']
let g:gutentags_ctags_extra_args += ['--c-kinds=+px']
" 如果使用 universal ctags 需要增加下面一行
let g:gutentags_ctags_extra_args += ['--output-format=e-ctags']
" 禁用 gutentags 自动加载 gtags 数据库的行为
" 避免多个项目数据库相互干扰
" 使用plus插件解决问题
let g:gutentags_auto_add_gtags_cscope = 0
let $GTAGSLABEL = 'native-pygments'
"let $GTAGSCONF = '/usr/local/share/gtags/gtags.conf'
"预览 quickfix 窗口 ctrl-w z 关闭
Plug 'skywind3000/vim-preview'
"P 预览 大p关闭
autocmd FileType qf nnoremap <silent><buffer> p :PreviewQuickfix<cr>
autocmd FileType qf nnoremap <silent><buffer> P :PreviewClose<cr>
" noremap <Leader>u :PreviewScroll -1<cr> " 往上滚动预览窗口
" noremap <leader>d :PreviewScroll +1<cr> " 往下滚动预览窗口
endif
call plug#end()
" load vim default plugin
runtime macros/matchit.vim
" 编辑vimrc相关配置文件
nnoremap <leader>e :edit $MYVIMRC<cr>
nnoremap <leader>ge :edit /usr/share/vim/gvimrc<cr>
nnoremap <leader>vc :edit ~/.vimrc.custom.config<cr>
nnoremap <leader>vp :edit ~/.vimrc.custom.plugins<cr>
" 查看vimplus的help文件 NOTE::Need change according path
" nnoremap <leader>h :view +let\ &l:modifiable=0 ~/.vimplus/help.md<cr>
nnoremap <leader>h :view +let\ &l:modifiable=0 /home/tbox/TMZ/GitHub/vimown/help.md<cr>
" 打开当前光标所在单词的vim帮助文档
nnoremap <leader>H :execute ":help " . expand("<cword>")<cr>
" 重新加载vimrc文件
nnoremap <leader>s :source $MYVIMRC<cr>
nnoremap <leader>gs :source /usr/share/vim/gvimrc<cr>
" 安装、更新、删除插件
" tmz 2019/12/26
"nnoremap <leader><leader>i :PlugInstall<cr>
"nnoremap <leader><leader>u :PlugUpdate<cr>
"nnoremap <leader><leader>c :PlugClean<cr>
" 分屏窗口移动
nnoremap <c-j> <c-w>j
nnoremap <c-k> <c-w>k
nnoremap <c-h> <c-w>h
nnoremap <c-l> <c-w>l
""快速切换窗口"
nnoremap <leader>\ :vs<CR>
nnoremap <leader>- :sp<CR>
""tmz 2019/12/26"
"" 复制当前选中到系统剪切板
"vmap <leader><leader>y "+y
"
"" 将系统剪切板内容粘贴到vim
"nnoremap <leader><leader>p "+p
" 打开文件自动定位到最后编辑的位置
autocmd BufReadPost * if line("'\"") > 1 && line("'\"") <= line("$") | execute "normal! g'\"" | endif
" 主题
set background=dark
let g:onedark_termcolors=256
colorscheme onedark
"""""""""""""""""[6]airline""""""""""""""""""""""""""""
if !exists('g:airline_symbols')
let g:airline_symbols = {}
endif
let g:airline_left_sep = '▶'
let g:airline_left_alt_sep = '❯'
let g:airline_right_sep = '◀'
let g:airline_right_alt_sep = '❮'
let g:airline_symbols.linenr = '¶'
let g:airline_symbols.branch = '⎇'
" 是否打开tabline
"打开后，tabline和tmuxline都可以得到增强
"let g:airline#extensions#tabline#enabled = 1
let g:airline#enabled = 1
" " airline
" let g:airline_theme="onedark"
" let g:airline_powerline_fonts = 1
" let g:airline#extensions#tabline#enabled = 1
" if !exists('g:airline_symbols')
" let g:airline_symbols = {}
" endif
" let g:airline_left_sep = ''
" let g:airline_left_alt_sep = ''
" let g:airline_right_sep = ''
" let g:airline_right_alt_sep = ''
"""""""""""""""""""""""""""""""""""""""""
""""""tmz 2019/12/26""""""""""""""""""""
" cpp-mode
"nnoremap <leader>y :CopyCode<cr>
"nnoremap <leader>p :PasteCode<cr>
"nnoremap <leader>U :GoToFunImpl<cr>
" nnoremap <silent> <leader>a :Switch<cr>
" nnoremap <leader><leader>fp :FormatFunParam<cr>
"nnoremap <leader><leader>if :FormatIf<cr>
"a.vim
" change-colorscheme
" nnoremap <silent> <F9> :PreviousColorScheme<cr>
" inoremap <silent> <F9> <esc> :PreviousColorScheme<cr>
" nnoremap <silent> <F10> :NextColorScheme<cr>
" inoremap <silent> <F10> <esc> :NextColorScheme<cr>
" nnoremap <silent> <F11> :RandomColorScheme<cr>
" inoremap <silent> <F11> <esc> :RandomColorScheme<cr>
" nnoremap <silent> <F12> :ShowColorScheme<cr>
" inoremap <silent> <F12> <esc> :ShowColorScheme<cr>
" prepare-code
"let g:prepare_code_plugin_path = expand($HOME . "/.vim/plugged/prepare-code")
"
"
"nmap <F6> ms:call TitleDet1() <cr>'s
""在文件中按F6调用
"function AddTitle1()
" call append (0,"/*********************************************************************")
" call append (1," * Author : tmz")
" call append (2," * Email : 994052070@qq.com")
" call append (3," * Last modified : ".strftime("%Y-%m-%d %H:%M"))
" call append (4," * Filename : ".expand("%:t"))
" call append (5," * Description : ")
" call append (6," * ******************************************************************/")
" echohl WarningMsg | echo "Adding coryright Successfully !!" | echohl None
"endfunction
""在上面代码中添加自己的版权信息
"function UpdateTitle1()
" normal m'
" execute '/* Last modified\s*:/s@:.*$@\=strftime(": %Y-%m-%d %H:%M")@'
" normal ''
" normal mk
" execute '/* Filename\s*:/s@:.*$@\=": ".expand("%:t")@'
" execute "noh"
" normal 'k
" echohl WarningMsg | echo "Updating coryright Successfully !!" | echohl None
"endfunction
"function TitleDet1()
" let n=1
" while n<7
" let line = getline(n)
" if line =~ '^\s*\*\s*Last\smodified\s*:\s*\S*.*$'
" call UpdateTitle1()
" return
" endif
" let n = n+1
" endwhile
" call AddTitle1()
"endfunction
" vim-buffer
nnoremap <silent> <c-p> :PreviousBuffer<cr>
nnoremap <silent> <c-n> :NextBuffer<cr>
" nnoremap <silent> <leader>d :CloseBuffer<cr>
" nnoremap <silent> <leader>D :BufOnly<cr>
" vim-edit
" nnoremap Y :CopyText<cr>
" nnoremap D :DeleteText<cr>
" nnoremap C :ChangeText<cr>
" nnoremap <leader>r :ReplaceTo<space>
"""""""tmz 2019/12/26"""""""
" nerdtree
" nnoremap <silent> <leader>n :NERDTreeToggle<cr>
" let g:NERDTreeFileExtensionHighlightFullName = 1
" let g:NERDTreeExactMatchHighlightFullName = 1
" let g:NERDTreePatternMatchHighlightFullName = 1
" let g:NERDTreeHighlightFolders = 1
" let g:NERDTreeHighlightFoldersFullName = 1
" let g:NERDTreeDirArrowExpandable='▷'
" let g:NERDTreeDirArrowCollapsible='▼'
"""""""""""""""""[4]NERDTree""""""""""""""""""""""""""""
"当打开vim且没有文件时自动打开NERDTree
"autocmd vimenter * if !argc() | NERDTree | endif
"只剩 NERDTree时自动关闭
"autocmd vimenter * if !argc() | NERDTree | endif
autocmd bufenter * if (winnr("$") == 1 && exists("b:NERDTreeType") && b:NERDTreeType == "primary") | q | endif
let NERDTreeShowLineNumbers=1
let NERDTreeAutoCenter=1
let NERDTreeShowHidden=1
let NERDTreeIgnore=['\.pyc','\~$','\.swp','\.git']
map <silent><F3> :NERDTreeToggle<CR>
imap <F3> <ESC> :NERDTreeToggle<CR>
""""""""""""""""""""""""0503 youcompleteme"""""""""""""""
"寻找全局配置文件
let g:ycm_global_ycm_extra_conf = '/home/tbox/TMZ/GitHub/vimown/.ycm_extra_conf.py'
set completeopt=menu,menuone "关闭自动弹出的窗口
let g:ycm_add_preview_to_completeopt = 0
let g:ycm_show_diagnostics_ui = 0
" 不显示开启vim时检查ycm_extra_conf文件的信息
let g:ycm_confirm_extra_conf = 0
" 开启基于tag的补全，可以在这之后添加需要的标签路径
let g:ycm_collect_identifiers_from_tags_files = 1
" 开启语义补全
let g:ycm_seed_identifiers_with_syntax = 1
"注释和字符串中的文字也会被收入补全
let g:ycm_collect_identifiers_from_comments_and_strings = 0
" 输入第 2 个字符开始补全
let g:ycm_min_num_of_chars_for_completion=5
" 禁止缓存匹配项,每次都重新生成匹配项
let g:ycm_cache_omnifunc=0
"在注释输入中也能补全
let g:ycm_complete_in_comments = 1
"在字符串输入中也能补全
let g:ycm_complete_in_strings = 1
"定义快捷健补全
let g:ycm_key_list_select_completion = ['<c-n>', '<Down>']
let g:ycm_key_list_previous_completion = ['<c-p>', '<Up>']
" 设置在下面几种格式的文件上屏蔽ycm
let g:ycm_filetype_blacklist = {
\ 'tagbar' : 1,
\ 'qf' : 1,
\ 'notes' : 1,
\ 'markdown' : 1,
\ 'unite' : 1,
\ 'text' : 1,
\ 'vimwiki' : 1,
\ 'pandoc' : 1,
\ 'infolog' : 1,
\ 'mail' : 1
\}
" let g:ycm_semantic_triggers = {
" \ 'c' : ['->', '.'],
" \ 'objc' : ['->', '.', '::', 're!\[[_a-zA-Z]+\w*\s', 're!^\s*[^\W\d]\w*\s',
" \ 're!\[.*\]\s'],
" \ 'ocaml' : ['.', '#'],
" \ 'cpp,objcpp' : ['->', '.', '::'],
" \ 'perl' : ['->'],
" \ 'php' : ['->', '::'],
" \ 'cs,java,javascript,typescript,d,python,perl6,scala,vb,elixir,go' : ['.'],
" \ 'ruby' : ['.', '::'],
" \ 'lua' : ['.', ':'],
" \ 'erlang' : [':'],
" \ }
let g:ycm_semantic_triggers = {
\ 'c' : ['->', '.', '::', 're![_a-zA-Z0-9]'],
\ 'objc' : ['->', '.', '::', 're!\[[_a-zA-Z]+\w*\s', 're!^\s*[^\W\d]\w*\s',
\ 're!\[.*\]\s'],
\ 'ocaml' : ['.', '#'],
\ 'cpp,objcpp' : ['->', '.', '::', 're![_a-zA-Z0-9]'],
\ 'perl' : ['->'],
\ 'php' : ['->', '::'],
\ 'cs,java,javascript,typescript,d,python,perl6,scala,vb,elixir,go' : ['.'],
\ 'ruby' : ['.', '::'],
\ 'lua' : ['.', ':'],
\ 'erlang' : [':'],
\ }
let g:ycm_cache_omnifunc = 1
let g:ycm_use_ultisnips_completer = 1
"add tmz
set pumheight=10
" " YCM "TODO"
" " 如果不指定python解释器路径，ycm会自己搜索一个合适的(与编译ycm时使用的python版本匹配)
" " let g:ycm_server_python_interpreter = '/usr/bin/python2.7'
" let g:ycm_confirm_extra_conf = 0
" let g:ycm_error_symbol = '✗'
" let g:ycm_warning_symbol = '✹'
" let g:ycm_seed_identifiers_with_syntax = 1
" let g:ycm_complete_in_comments = 1
" let g:ycm_complete_in_strings = 1
" let g:ycm_collect_identifiers_from_tags_files = 1
" let g:ycm_semantic_triggers = {
" \ 'c' : ['->', '.','re![_a-zA-z0-9]'],
" \ 'objc' : ['->', '.', 're!\[[_a-zA-Z]+\w*\s', 're!^\s*[^\W\d]\w*\s',
" \ 're!\[.*\]\s'],
" \ 'ocaml' : ['.', '#'],
" \ 'cpp,objcpp' : ['->', '.', '::','re![_a-zA-Z0-9]'],
" \ 'perl' : ['->'],
" \ 'php' : ['->', '::'],
" \ 'cs,java,javascript,typescript,d,python,perl6,scala,vb,elixir,go' : ['.'],
" \ 'ruby' : ['.', '::'],
" \ 'lua' : ['.', ':'],
" \ 'erlang' : [':'],
" \ }
" nnoremap <leader>u :YcmCompleter GoToDeclaration<cr>
" " 已经使用cpp-mode插件提供的转到函数实现的功能
" " nnoremap <leader>i :YcmCompleter GoToDefinition<cr>
" nnoremap <leader>o :YcmCompleter GoToInclude<cr>
" nnoremap <leader>ff :YcmCompleter FixIt<cr>
" nmap <F5> :YcmDiags<cr>
" tagbar
let g:tagbar_width = 30
nnoremap <silent> <leader>t :TagbarToggle<cr>
"tmz 2019/12/26
" incsearch.vim
" map / <Plug>(incsearch-forward)
" map ? <Plug>(incsearch-backward)
" map g/ <Plug>(incsearch-stay)
" tmz 2019/12/26
" vim-easymotion
"let g:EasyMotion_smartcase = 1
"map <leader>w <Plug>(easymotion-bd-w)
"nmap <leader>w <Plug>(easymotion-overwin-w)
" " nerdtree-git-plugin
" let g:NERDTreeIndicatorMapCustom = {
" \ "Modified" : "✹",
" \ "Staged" : "✚",
" \ "Untracked" : "✭",
" \ "Renamed" : "➜",
" \ "Unmerged" : "═",
" \ "Deleted" : "✖",
" \ "Dirty" : "✗",
" \ "Clean" : "✔︎",
" \ 'Ignored' : '☒',
" \ "Unknown" : "?"
" \ }
"LeaderF
nnoremap <leader>f :LeaderfFile ~<cr>
let g:Lf_WildIgnore = {
\ 'dir': ['.svn','.git', 'root', '.hg','.vscode','.wine','.deepinwine','.oh-my-zsh'],
\ 'file': ['*.sw?','~$*','*.bak','*.exe','*.o','*.so','*.py[co]']
\}
let g:Lf_UseCache = 0
"tmz 2019/12/26
" ack
"nnoremap <leader>F :Ack!<space>
"""tmz 2109/12/26"""
" echodoc.vim
"let g:echodoc_enable_at_startup = 1
" tabular
nnoremap <leader>l :Tab /\|<cr>
nnoremap <leader>= :Tab /=<cr>
" tmz 2019/12/26
" vim-smooth-scroll
noremap <silent> <c-u> :call smooth_scroll#up(&scroll, 0, 2)<CR>
noremap <silent> <c-d> :call smooth_scroll#down(&scroll, 0, 2)<CR>
noremap <silent> <c-b> :call smooth_scroll#up(&scroll*2, 0, 4)<CR>
noremap <silent> <c-f> :call smooth_scroll#down(&scroll*2, 0, 4)<CR>
"
"""""""""""""""""[8]supertab""""""""""""""""""""""""""""
let g:SuperTabDefaultCompletionType="<C-X><C-O>"
let g:SuperTabRetainCompletionType=2
" gv
nnoremap <leader>g :GV<cr>
nnoremap <leader>G :GV!<cr>
nnoremap <leader>gg :GV?<cr>
filetype plugin indent on " required
" To ignore plugin indent changes, instead use:
"filetype plugin on
" 加载自定义配置
if filereadable(expand($HOME . '/.vimrc.custom.config'))
source $HOME/.vimrc.custom.config
endif
-
其中， 最主要的是插件列表
-
配置中最精华的部分为tag的生成，代码的查找都是根据tag来，对于c/c++代码的跳转有飞跃的提升。vim-gutentags和gutentags_plus两个插件比其他的插件更加的高效。
-
YoucompleteMe插件的正常使用没有问题，有时候为了提升效率，需要进行定制化。图框中的位置可以进行更改
-
提升补全效率可对其中进行定制化配置
4. 基本操作指令
- 插件更新 PlugUpdate
- NERDTree
- ，cg 查找定义
- ，cf 查找文件
- ，cc 查找调用
- 书签 mm, mn, mp
- 切换窗口 ctrl + h, ctrl +j, ctrl +k,ctrl+l
- tagbar可以查看代码结构
联系方式
为了更好的反馈联系，个人留下了一些联系方式
微信：994052070
邮箱：994052070@qq.com
github: https://github.com/ByteXiaoTang
扫一扫
7万+
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
