目录
使用 Hystrix 实现容错处理
创建一个 module 模块,取名为 blog-hystrix-demo,在项目中增加 Hystrix 的依赖,代码如下所示:
<!-- spring mvc,etc. -->
<dependency>
<groupId>org.springframework.boot</groupId>
<artifactId>spring-boot-starter-web</artifactId>
</dependency>
<!-- hystrix -->
<dependency>
<groupId>org.springframework.cloud</groupId>
<artifactId>spring-cloud-starter-netflix-hystrix</artifactId>
</dependency>
在启动类上添加 @EnableHystrix
或者 @EnableCircuitBreaker
。注意,@EnableHystrix
中包含了 @EnableCircuitBreaker
。
@SpringBootApplication
@EnableHystrix
public class BlogHystrixApplication {
public static void main(String[] args) {
SpringApplication.run(BlogHystrixApplication.class, args);
}
@Bean
public RestTemplate restTemplate() {
return new RestTemplate();
}
}
然后编写一个调用接口的方法,在上面增加一个 @HystrixCommand
注解,用于指定依赖服务调用延迟或失败时调用的方法,代码如下所示:
@RestController
@RequestMapping("/user")
public class HystrixController {
@Autowired
private RestTemplate restTemplate;
@GetMapping("/find/{id}")
@HystrixCommand(fallbackMethod = "findUserByIdFallbackMethod")
public String findById(@PathVariable Integer id) {
return restTemplate.getForObject("http://localhost:8081/user/" + id, String.class);
}
public String findUserByIdFallbackMethod(Integer id) {
return "fail" + id;
}
}
当调用失败触发熔断时会用 findUserByIdFallbackMethod
方法来回退具体的内容。
只要不启动 8081 端口所在的服务,调用 /user/find/1
接口,就可以看到返回的内容是fail1
。
在 Spring Cloud 中使用断路器后可能会遇到:com.netflix.hystrix.contrib.javanica.exception.FallbackDefinitionException: fallback method wasn't found ...
这是因为指定的备用方法和原方法的参数类型,个数不同造成的。需要统一参数列表。
将启动类上的 @EnableHystrix
去掉,重启服务,再次调用 /user/find/1
接口可以看到返回的是 500 错误信息,这个时候就没有用到回退功能了。
配置详解
HystrixCommand
中除了 fallbackMethod
还有很多的配置。
名称 | 说明 |
---|---|
hystrix.command.default.execution.isolation.strategy | 该配置用来指定隔离策略,具体策略有下面 2 种。THREAD:线程隔离,在单独的线程上执行,并发请求受线程池大小的控制。SEMAPHORE:信号量隔离,在调用线程上执行,并发请求受信号量计数器的限制。 |
hystrix.command.default.execution.isolation .thread.timeoutInMilliseconds | 该配置用于 HystrixCommand 执行的超时时间设置,当 HystrixCommand 执行的时间超过了该配置所设置的数值后就会进入服务降级处理,单位是毫秒,默认值为 1000。 |
hystrix.command.default.execution.timeout.enabled | 该配置用于确定是否启用 execution.isolation.thread.timeoutInMilliseconds 设置的超时时间,默认值为 true。设置为 false 后 execution.isolation.thread.timeoutInMilliseconds 配置也将失效。 |
hystrix.command.default.execution.isolation.thread.interruptOnTimeout | 该配置用于确定 HystrixCommand 执行超时后是否需要中断它,默认值为 true。 |
hystrix.command.default.execution.isolation.thread.interruptOnCancel | 该配置用于确定 HystrixCommand 执行被取消时是否需要中断它,默认值为 false。 |
hystrix.command.default.execution.isolation.semaphore.maxConcurrentRequests | 该配置用于确定 Hystrix 使用信号量策略时最大的并发请求数。 |
hystrix.command.default.fallback.isolation.semaphore.maxConcurrentRequests | 该配置用于如果并发数达到该设置值,请求会被拒绝和抛出异常并且 fallback 不会被调用,默认值为 10。 |
hystrix.command.default.fallback.enabled | 该配置用于确定当执行失败或者请求被拒绝时,是否会尝试调用 hystrixCommand.getFallback(),默认值为 true。 |
hystrix.command.default.circuitBreaker.enabled | 该配置用来跟踪 circuit 的健康性,如果未达标则让 request 短路,默认值为 true。 |
hystrix.command.default.circuitBreaker.requestVolumeThreshold | 该配置用于设置一个 rolling window 内最小的请求数。如果设为 20,那么当一个 rolling window 的时间内(比如说 1 个 rolling window 是 10 秒)收到 19 个请求,即使 19 个请求都失败,也不会触发 circuit break,默认值为 20。 |
hystrix.command.default.circuitBreaker.sleepWindowInMilliseconds | 该配置用于设置一个触发短路的时间值,当该值设为 5000 时,则当触发 circuit break 后的 5000 毫秒内都会拒绝 request,也就是 5000 毫秒后才会关闭 circuit。默认值为 5000。 |
hystrix.command.default.circuitBreaker.errorThresholdPercentage | 该配置用于设置错误率阈值,当错误率超过此值时,所有请求都会触发 fallback,默认值为 50。 |
hystrix.command.default.circuitBreaker.forceOpen | 如果配置为 true,将强制打开熔断器,在这个状态下将拒绝所有请求,默认值为 false。 |
hystrix.command.default.circuitBreaker.forceClosed | 如果配置为 true,则将强制关闭熔断器,在这个状态下,不管错误率有多高,都允许请求,默认值为 false。 |
hystrix.command.default.metrics.rollingStats.timeInMilliseconds | 设置统计的时间窗口值,单位为毫秒。circuit break 的打开会根据 1 个 rolling window 的统计来计算。若 rolling window 被设为 10 000 毫秒,则 rolling window 会被分成多个 buckets,每个 bucket 包含 success、failure、timeout、rejection 的次数的统计信息。默认值为 10 000 毫秒。 |
hystrix.command.default.metrics.rollingStats.numBuckets | 设置一个 rolling window 被划分的数量,若 numBuckets=10、rolling window=10 000,那么一个 bucket 的时间即 1 秒。必须符合 rolling window%numberBuckets==0。默认值为 10。 |
hystrix.command.default.metrics.rollingPercentile.enabled | 是否开启指标的计算和跟踪,默认值为 true。 |
hystrix.command.default.metrics.rollingPercentile.timeInMilliseconds | 设置 rolling percentile window 的时间,默认值为 60 000 毫秒 |
hystrix.command.default.metrics.rollingPercentile.numBuckets | 设置 rolling percentile window 的 numberBuckets,默认值为 6。 |
hystrix.command.default.metrics.rollingPercentile.bucketSize | 如果 bucket size=100、window=10 秒,若这 10 秒里有 500 次执行,只有最后 100 次执行会被统计到 bucket 里去。增加该值会增加内存开销及排序的开销。默认值为 100。 |
hystrix.command.default.metrics.healthSnapshot.intervalInMilliseconds | 用来计算影响断路器状态的健康快照的间隔等待时间,默认值为 500 毫秒。 |
hystrix.command.default.requestCache.enabled | 是否开启请求缓存功能,默认值为 true。 |
hystrix.command.default.requestLog.enabled | 记录日志到 HystrixRequestLog,默认值为 true。 |
hystrix.collapser.default.maxRequestsInBatch | 单次批处理的最大请求数,达到该数量触发批处理,默认为 Integer.MAX_VALUE。 |
hystrix.collapser.default.timerDelayInMilliseconds | 触发批处理的延迟,延迟也可以为创建批处理的时间与该值的和,默认值为 10 毫秒。 |
hystrix.collapser.default.requestCache.enabled | 是否启用对 HystrixCollapser.execute() 和 HystrixCollapser.queue() 的请求缓存,默认值为 true。 |
hystrix.threadpool.default.coreSize | 并发执行的最大线程数,默认值为 10。 |
hystrix.threadpool.default.maxQueueSize | BlockingQueue 的最大队列数。当设为 -1 时,会使用 SynchronousQueue;值为正数时,会使用 LinkedBlcokingQueue。该设置只会在初始化时有效,之后不能修改 threadpool 的 queue size。默认值为 -1。 |
hystrix.threadpool.default.queueSizeRejectionThreshold | 即使没有达到 maxQueueSize,但若达到 queueSizeRejectionThreshold 该值后,请求也会被拒绝。因为 maxQueueSize 不能被动态修改,而 queueSizeRejectionThreshold 参数将允许我们动态设置该值。if maxQueueSize==-1,该字段将不起作用。 |
hystrix.threadpool.default.keepAliveTimeMinutes | 设置存活时间,单位为分钟。如果 coreSize 小于 maximumSize,那么该属性控制一个线程从实用完成到被释放的时间。默认值为 1 分钟。 |
hystrix.threadpool.default.allowMaximumSizeToDivergeFromCoreSize | 该属性允许 maximumSize 的配置生效。那么该值可以等于或高于 coreSize。设置 coreSize 小于 maximumSize 会创建一个线程池,该线程池可以支持 maximumSize 并发,但在相对不活动期间将向系统返回线程。默认值为 false。 |
hystrix.threadpool.default.metrics.rollingStats.timeInMilliseconds | 设置滚动时间窗的时间,单位为毫秒,默认值是 10 000。 |
hystrix.threadpool.default.metrics.rollingStats.numBuckets | 设置滚动时间窗划分桶的数量,默认值为 10。 |
官方的配置信息文档请参考:https://github.com/Netflix/Hystrix/wiki/Configuration。
上面列出来的都是 Hystrix 的配置信息,那么在 Spring Cloud 中,只需要在接口的方法上面使用 HystrixCommand
注解,指定对应的属性即可:
@HystrixCommand(fallbackMethod = "findUserByIdFallbackMethod", commandProperties = {
@HystrixProperty(name="execution.isolation.strategy", value = "THREAD")
})