下面的代码是udp_socket工程的main()函数,运行前须知道UDP通信的机制。该程序是客户端的程序,运行前需要开启服务器和端口。
在CC3200SDK-1.2.0上测试可用,下面是主函数文件的代码:
//*****************************************************************************
//已实现UDP发送,接受 发送包、大小可自定义
//*****************************************************************************
#include <stdlib.h>
#include <string.h>
#include "simplelink.h"
#include "wlan.h"
#include "hw_ints.h"
#include "hw_types.h"
#include "hw_memmap.h"
#include "rom.h"
#include "rom_map.h"
#include "interrupt.h"
#include "prcm.h"
#include "utils.h"
#include "uart.h"
#include "udma_if.h"
#include "common.h" /*此程序运行的是站点模式,需在此头文件中设置要连接AP(热点)的名称和密码以及加密方式*/
#ifndef NOTERM
#include "uart_if.h"
#endif
#include "pinmux.h"
#define APPLICATION_NAME "UDP Socket"
#define APPLICATION_VERSION "1.1.1"
#define IP_ADDR 0x771dc9c2 /* 119.29.104.72 设置服务器地址,需为其二进制形式 */
#define PORT_NUM 8911 //设置服务器端口号
#define BUF_SIZE 5 //发送缓冲区
#define BUF_SIZE_1 9 //接受缓冲区
#define UDP_PACKET_COUNT 1
#define TIMES 3
#define UDP_SEND 1 //允许发送宏
#define UDP_RECV 1 //允许接受宏
typedef enum{
SOCKET_CREATE_ERROR = -0x7D0,
BIND_ERROR = SOCKET_CREATE_ERROR - 1,
SEND_ERROR = BIND_ERROR - 1,
RECV_ERROR = SEND_ERROR -1,
SOCKET_CLOSE = RECV_ERROR -1,
DEVICE_NOT_IN_STATION_MODE = SOCKET_CLOSE - 1,
STATUS_CODE_MAX = -0xBB8
}e_AppStatusCodes;
int BsdUdpClient(unsigned short usPort);
static long WlanConnect();
static void DisplayBanner();
static void BoardInit();
static void InitializeAppVariables();
static long ConfigureSimpleLinkToDefaultState();
volatile unsigned long g_ulStatus = 0;//SimpleLink Status
unsigned long g_ulGatewayIP = 0; //Network Gateway IP address
unsigned char g_ucConnectionSSID[SSID_LEN_MAX+1]; //Connection SSID
unsigned char g_ucConnectionBSSID[BSSID_LEN_MAX]; //Connection BSSID
unsigned long g_ulDestinationIp = IP_ADDR; // Client IP address
unsigned int g_uiPortNum = PORT_NUM;
volatile unsigned long g_ulPacketCount = UDP_PACKET_COUNT;
unsigned char g_ucSimplelinkstarted = 0;
unsigned long g_ulIpAddr = 0;
char g_cBsdBuf[BUF_SIZE];
char g_cBsdBuf_2[BUF_SIZE_1];
#if defined(ccs) || defined(gcc)
extern void (* const g_pfnVectors[])(void);
#endif
#if defined(ewarm)
extern uVectorEntry __vector_table;
#endif
void SimpleLinkWlanEventHandler(SlWlanEvent_t *pWlanEvent)
{
if(!pWlanEvent)
{
return;
}
switch(pWlanEvent->Event)
{
case SL_WLAN_CONNECT_EVENT:
{
SET_STATUS_BIT(g_ulStatus, STATUS_BIT_CONNECTION);
memcpy(g_ucConnectionSSID,pWlanEvent->EventData.
STAandP2PModeWlanConnected.ssid_name,
pWlanEvent->EventData.STAandP2PModeWlanConnected.ssid_len);
memcpy(g_ucConnectionBSSID,
pWlanEvent->EventData.STAandP2PModeWlanConnected.bssid,
SL_BSSID_LENGTH);
UART_PRINT("[WLAN EVENT] STA Connected to the AP: %s , "
"BSSID: %x:%x:%x:%x:%x:%x\n\r",
g_ucConnectionSSID,g_ucConnectionBSSID[0],
g_ucConnectionBSSID[1],g_ucConnectionBSSID[2],
g_ucConnectionBSSID[3],g_ucConnectionBSSID[4],
g_ucConnectionBSSID[5]);
}
break;
case SL_WLAN_DISCONNECT_EVENT:
{
slWlanConnectAsyncResponse_t* pEventData = NULL;
CLR_STATUS_BIT(g_ulStatus, STATUS_BIT_CONNECTION);
CLR_STATUS_BIT(g_ulStatus, STATUS_BIT_IP_AQUIRED);
pEventData = &pWlanEvent->EventData.STAandP2PModeDisconnected;
if(SL_WLAN_DISCONNECT_USER_INITIATED_DISCONNECTION == pEventData->reason_code)
{
UART_PRINT("[WLAN EVENT]Device disconnected from the AP: %s,"
"BSSID: %x:%x:%x:%x:%x:%x on application's request \n\r",
g_ucConnectionSSID,g_ucConnectionBSSID[0],
g_ucConnectionBSSID[1],g_ucConnectionBSSID[2],
g_ucConnectionBSSID[3],g_ucConnectionBSSID[4],
g_ucConnectionBSSID[5]);
}
else
{
UART_PRINT("[WLAN ERROR]Device disconnected from the AP AP: %s,"
"BSSID: %x:%x:%x:%x:%x:%x on an ERROR..!! \n\r",
g_ucConnectionSSID,g_ucConnectionBSSID[0],
g_ucConnectionBSSID[1],g_ucConnectionBSSID[2],
g_ucConnectionBSSID[3],g_ucConnectionBSSID[4],
g_ucConnectionBSSID[5]);
}
memset(g_ucConnectionSSID,0,sizeof(g_ucConnectionSSID));
memset(g_ucConnectionBSSID,0,sizeof(g_ucConnectionBSSID));
}
break;
default:
{
UART_PRINT("[WLAN EVENT] Unexpected event [0x%x]\n\r",
pWlanEvent->Event);
}
break;
}
}
void SimpleLinkNetAppEventHandler(SlNetAppEvent_t *pNetAppEvent)
{
if(!pNetAppEvent)
{
return;
}
switch(pNetAppEvent->Event)
{
case SL_NETAPP_IPV4_IPACQUIRED_EVENT:
{
SlIpV4AcquiredAsync_t *pEventData = NULL;
SET_STATUS_BIT(g_ulStatus, STATUS_BIT_IP_AQUIRED);
pEventData = &pNetAppEvent->EventData.ipAcquiredV4;
g_ulIpAddr = pEventData->ip;
g_ulGatewayIP = pEventData->gateway;
UART_PRINT("[NETAPP EVENT] IP Acquired: IP=%d.%d.%d.%d , "
"Gateway=%d.%d.%d.%d\n\r",
SL_IPV4_BYTE(g_ulIpAddr,3),
SL_IPV4_BYTE(g_ulIpAddr,2),
SL_IPV4_BYTE(g_ulIpAddr,1),
SL_IPV4_BYTE(g_ulIpAddr,0),
SL_IPV4_BYTE(g_ulGatewayIP,3),
SL_IPV4_BYTE(g_ulGatewayIP,2),
SL_IPV4_BYTE(g_ulGatewayIP,1),
SL_IPV4_BYTE(g_ulGatewayIP,0));
}
break;
default:
{
UART_PRINT("[NETAPP EVENT] Unexpected event [0x%x] \n\r",
pNetAppEvent->Event);
}
break;
}
}
void SimpleLinkHttpServerCallback(SlHttpServerEvent_t *pHttpEvent,
SlHttpServerResponse_t *pHttpResponse)
{
// Unused in this application
}
void SimpleLinkGeneralEventHandler(SlDeviceEvent_t *pDevEvent)
{
if(!pDevEvent)
{
return;
}
UART_PRINT("[GENERAL EVENT] - ID=[%d] Sender=[%d]\n\n",
pDevEvent->EventData.deviceEvent.status,
pDevEvent->EventData.deviceEvent.sender);
}
void SimpleLinkSockEventHandler(SlSockEvent_t *pSock)
{
// This application doesn't work w/ socket - Events are not expected
}
static void InitializeAppVariables()
{
g_ulStatus = 0;
g_ulGatewayIP = 0;
memset(g_ucConnectionSSID,0,sizeof(g_ucConnectionSSID));
memset(g_ucConnectionBSSID,0,sizeof(g_ucConnectionBSSID));
g_ulDestinationIp = IP_ADDR;
g_uiPortNum = PORT_NUM;
g_ulPacketCount = UDP_PACKET_COUNT;
}
static long ConfigureSimpleLinkToDefaultState()
{
SlVersionFull ver = {0};
_WlanRxFilterOperationCommandBuff_t RxFilterIdMask = {0};
unsigned char ucVal = 1;
unsigned char ucConfigOpt = 0;
unsigned char ucConfigLen = 0;
unsigned char ucPower = 0;
long lRetVal = -1;
long lMode = -1;
lMode = sl_Start(0, 0, 0);
ASSERT_ON_ERROR(lMode);
if (ROLE_STA != lMode)
{
if (ROLE_AP == lMode)
{
while(!IS_IP_ACQUIRED(g_ulStatus))
{
#ifndef SL_PLATFORM_MULTI_THREADED
_SlNonOsMainLoopTask();
#endif
}
}
lRetVal = sl_WlanSetMode(ROLE_STA);
ASSERT_ON_ERROR(lRetVal);
lRetVal = sl_Stop(0xFF);
ASSERT_ON_ERROR(lRetVal);
lRetVal = sl_Start(0, 0, 0);
ASSERT_ON_ERROR(lRetVal);
if (ROLE_STA != lRetVal)
{
return DEVICE_NOT_IN_STATION_MODE;
}
}
ucConfigOpt = SL_DEVICE_GENERAL_VERSION;
ucConfigLen = sizeof(ver);
lRetVal = sl_DevGet(SL_DEVICE_GENERAL_CONFIGURATION, &ucConfigOpt,
&ucConfigLen, (unsigned char *)(&ver));
ASSERT_ON_ERROR(lRetVal);
UART_PRINT("Host Driver Version: %s\n\r",SL_DRIVER_VERSION);
UART_PRINT("Build Version %d.%d.%d.%d.31.%d.%d.%d.%d.%d.%d.%d.%d\n\r",
ver.NwpVersion[0],ver.NwpVersion[1],ver.NwpVersion[2],ver.NwpVersion[3],
ver.ChipFwAndPhyVersion.FwVersion[0],ver.ChipFwAndPhyVersion.FwVersion[1],
ver.ChipFwAndPhyVersion.FwVersion[2],ver.ChipFwAndPhyVersion.FwVersion[3],
ver.ChipFwAndPhyVersion.PhyVersion[0],ver.ChipFwAndPhyVersion.PhyVersion[1],
ver.ChipFwAndPhyVersion.PhyVersion[2],ver.ChipFwAndPhyVersion.PhyVersion[3]);
lRetVal = sl_WlanPolicySet(SL_POLICY_CONNECTION,
SL_CONNECTION_POLICY(1, 0, 0, 0, 1), NULL, 0);
ASSERT_ON_ERROR(lRetVal);
lRetVal = sl_WlanProfileDel(0xFF);
ASSERT_ON_ERROR(lRetVal);
lRetVal = sl_WlanDisconnect();
if(0 == lRetVal)
{
while(IS_CONNECTED(g_ulStatus))
{
#ifndef SL_PLATFORM_MULTI_THREADED
_SlNonOsMainLoopTask();
#endif
}
}
lRetVal = sl_NetCfgSet(SL_IPV4_STA_P2P_CL_DHCP_ENABLE,1,1,&ucVal);
ASSERT_ON_ERROR(lRetVal);
ucConfigOpt = SL_SCAN_POLICY(0);
lRetVal = sl_WlanPolicySet(SL_POLICY_SCAN , ucConfigOpt, NULL, 0);
ASSERT_ON_ERROR(lRetVal);
ucPower = 0;
lRetVal = sl_WlanSet(SL_WLAN_CFG_GENERAL_PARAM_ID,
WLAN_GENERAL_PARAM_OPT_STA_TX_POWER, 1, (unsigned char *)&ucPower);
ASSERT_ON_ERROR(lRetVal);
lRetVal = sl_WlanPolicySet(SL_POLICY_PM , SL_NORMAL_POLICY, NULL, 0);
ASSERT_ON_ERROR(lRetVal);
lRetVal = sl_NetAppMDNSUnRegisterService(0, 0);
ASSERT_ON_ERROR(lRetVal);
memset(RxFilterIdMask.FilterIdMask, 0xFF, 8);
lRetVal = sl_WlanRxFilterSet(SL_REMOVE_RX_FILTER, (_u8 *)&RxFilterIdMask,
sizeof(_WlanRxFilterOperationCommandBuff_t));
ASSERT_ON_ERROR(lRetVal);
lRetVal = sl_Stop(SL_STOP_TIMEOUT);
ASSERT_ON_ERROR(lRetVal);
InitializeAppVariables();
return lRetVal; // Success
}
int IpAddressParser(char *ucCMD)
{
int i=0;
unsigned int uiUserInputData;
unsigned long ulUserIpAddress = 0;
char *ucInpString;
ucInpString = strtok(ucCMD, ".");
uiUserInputData = (int)strtoul(ucInpString,0,10);
while(i<4)
{
if((ucInpString != NULL) && (uiUserInputData < 256))
{
ulUserIpAddress |= uiUserInputData;
if(i < 3)
ulUserIpAddress = ulUserIpAddress << 8;
ucInpString=strtok(NULL,".");
uiUserInputData = (int)strtoul(ucInpString,0,10);
i++;
}
else
{
return -1;
}
}
g_ulDestinationIp = ulUserIpAddress;
return SUCCESS;
}
int BsdUdpClient(unsigned short usPort)
{
short sTestBufLen;
short sTestBufLen_1;
SlSockAddrIn_t sAddr;
int iAddrSize;
int iSockID;
int iStatus;
unsigned long lLoopCount = 0;
char g_cBsdBuf[BUF_SIZE] = "abcd";
char g_cBsdBuf_1[BUF_SIZE_1];
sTestBufLen = BUF_SIZE;
sTestBufLen_1 = BUF_SIZE_1;
sAddr.sin_family = SL_AF_INET;
sAddr.sin_port = sl_Htons((unsigned short)usPort);
sAddr.sin_addr.s_addr = sl_Htonl((unsigned int)g_ulDestinationIp);
iAddrSize = sizeof(SlSockAddrIn_t);
iSockID = sl_Socket(SL_AF_INET,SL_SOCK_DGRAM, 0);
if( iSockID < 0 )
{
ASSERT_ON_ERROR(SOCKET_CREATE_ERROR);
}
while (lLoopCount < g_ulPacketCount)
{
#if UDP_SEND ==1
iStatus = sl_SendTo(iSockID, g_cBsdBuf, sTestBufLen, 0,
(SlSockAddr_t *)&sAddr, iAddrSize);
if( iStatus <= 0 )
{
sl_Close(iSockID);
ASSERT_ON_ERROR(SEND_ERROR);
}
lLoopCount++;
UART_PRINT("Sent %s packets successfully\n\r",g_cBsdBuf);
// UART_PRINT("Sent %u packets successfully\n\r",g_ulPacketCount);
#endif
#if UDP_RECV ==1
iStatus = sl_RecvFrom(iSockID, g_cBsdBuf_1, sTestBufLen_1, 0,
( SlSockAddr_t *)&sAddr, (SlSocklen_t*)&iAddrSize );
memcpy(g_cBsdBuf_2,g_cBsdBuf_1,BUF_SIZE_1*sizeof(char));
if( iStatus < 0 )
{
sl_Close(iSockID);
ASSERT_ON_ERROR(RECV_ERROR);
}
lLoopCount++;
UART_PRINT("Recv %s packets successfully\n\r",g_cBsdBuf_1);
// UART_PRINT("Recv %u packets successfully\n\r",g_ulPacketCount);
#endif
}
sl_Close(iSockID);
return SUCCESS;
}
static long WlanConnect()
{
SlSecParams_t secParams = {0};
long lRetVal = 0;
secParams.Key = (signed char*)SECURITY_KEY;
secParams.KeyLen = strlen(SECURITY_KEY);
secParams.Type = SECURITY_TYPE;
lRetVal = sl_WlanConnect((signed char*)SSID_NAME, strlen(SSID_NAME), 0, \
&secParams, 0);
ASSERT_ON_ERROR(lRetVal);
while((!IS_CONNECTED(g_ulStatus)) || (!IS_IP_ACQUIRED(g_ulStatus)))
{
#ifndef SL_PLATFORM_MULTI_THREADED
_SlNonOsMainLoopTask();
#endif
}
return SUCCESS;
}
static void
DisplayBanner(char * AppName)
{
UART_PRINT("\n\n\n\r");
UART_PRINT("\t\t *************************************************\n\r");
UART_PRINT("\t\t CC3200 %s Application \n\r", AppName);
UART_PRINT("\t\t *************************************************\n\r");
UART_PRINT("\n\n\n\r");
}
static void
BoardInit(void)
{
#ifndef USE_TIRTOS
#if defined(ccs) || defined(gcc)
MAP_IntVTableBaseSet((unsigned long)&g_pfnVectors[0]);
#endif
#if defined(ewarm)
MAP_IntVTableBaseSet((unsigned long)&__vector_table);
#endif
#endif
MAP_IntMasterEnable();
MAP_IntEnable(FAULT_SYSTICK);
PRCMCC3200MCUInit();
}
void main()
{
long lRetVal = -1;
int times;
BoardInit();
UDMAInit();
PinMuxConfig();
InitTerm();
DisplayBanner(APPLICATION_NAME);
InitializeAppVariables();
lRetVal = ConfigureSimpleLinkToDefaultState();
if(lRetVal < 0)
{
if (DEVICE_NOT_IN_STATION_MODE == lRetVal)
UART_PRINT("Failed to configure the device in its default state \n\r");
LOOP_FOREVER();
}
UART_PRINT("Device is configured in default state \n\r");
lRetVal = sl_Start(0, 0, 0);
if (lRetVal < 0 || lRetVal != ROLE_STA)
{
UART_PRINT("Failed to start the device \n\r");
LOOP_FOREVER();
}
UART_PRINT("Device started as STATION \n\r");
UART_PRINT("Connecting to AP: %s ...\r\n",SSID_NAME);
lRetVal = WlanConnect();
if(lRetVal < 0)
{
UART_PRINT("Failed to establish connection w/ an AP \n\r");
LOOP_FOREVER();
}
UART_PRINT("Connected to AP: %s \n\r",SSID_NAME);
UART_PRINT("Device IP: %d.%d.%d.%d\n\r\n\r",
SL_IPV4_BYTE(g_ulIpAddr,3),
SL_IPV4_BYTE(g_ulIpAddr,2),
SL_IPV4_BYTE(g_ulIpAddr,1),
SL_IPV4_BYTE(g_ulIpAddr,0));
times = TIMES;
while(times>0)
{
lRetVal = BsdUdpClient(PORT_NUM);
if(lRetVal < 0)
{
ERR_PRINT(lRetVal);
LOOP_FOREVER();
}
times = times-1;
}
UART_PRINT("Exiting Application ...\n\r");
lRetVal = sl_Stop(SL_STOP_TIMEOUT);
while (1)
{
_SlNonOsMainLoopTask();
}
}