Ubuntu14 下Limesdr环境搭建
1、 LimeSuite驱动程序安装:
sudo add-apt-repository -y ppa:myriadrf/drivers
sudo apt-get update
sudo apt-get install limesuite liblimesuite-dev limesuite-udev limesuite-images
sudo apt-get install soapysdr-tools soapysdr-module-lms7
#soapysdr-tools use to be called just soapysdr on older packages
sudo apt-get install soapysdr soapysdr-module-lms7
2 Ubuntu
#packages for soapysdr available at myriadrf PPA
sudo add-apt-repository -y ppa:myriadrf/drivers
sudo apt-get update
#install core library and build dependencies
sudo apt-get install git g++ cmake libsqlite3-dev
#install hardware support dependencies
sudo apt-get install libsoapysdr-dev libi2c-dev libusb-1.0-0-dev
#install graphics dependencies
sudo apt-get install libwxgtk3.0-dev freeglut3-dev
3 Unix makefiles
The following commands will clone the LimeSuite repository, configure the project using CMake, build the project, and install it. The output of the cmake command will show enabled and disabled components. Pay careful attention to this before building with make.
git clone https://github.com/myriadrf/LimeSuite.git
cd LimeSuite
mkdir builddir && cd builddir
cmake …/
make -j4
sudo make install
sudo ldconfig