Centos 添加静态路由及 SIOCADDRT错误处理

• 需求：将访问211.211.1.69的数据包通过em2发送到172.24.32.6，实现内网访问211.211.1.69。

# 网络基本信息
[root@apprz network-scripts]# route
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
172.24.32.4     *               255.255.255.252 U     1      0        0 em2
192.168.9.0     *               255.255.255.0   U     1      0        0 em1
default         192.168.9.254   0.0.0.0         UG    0      0        0 em1

[root@nagios ~]# cat /etc/sysconfig/network-scripts/ifcfg-em2 
DEVICE=em2
IPADDR=172.24.30.6
NETMASK=255.255.255.252

[root@nagios ~]# cat /etc/sysconfig/network-scripts/ifcfg-em1
DEVICE=em1
IPADDR=192.168.9.13
NETMASK=255.255.255.0
GATEWAY=192.168.9.254
   
   
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
   
   

    
    
   
   

静态路由添加命令：route add –host 211.211.1.69 gw 172.24.32.6 dev em2

---

• 错误 -net 只能指定网段

[root@nagios ~]# route add -net 211.211.10.69 netmask 255.255.255.0 dev eth3
route: netmask doesn't match route address
   
   
1
2
   
   

    
    
   
   

• 正确

[root@nagios ~]# route add -net 211.211.10.0 netmask 255.255.255.0 dev eth3
   
   
1
   
   

    
    
   
   

---

• 错误 -host 不用指定掩码

[root@nagios ~]# route add -host 211.211.1.69 netmask 255.255.255.0 gw 172.30.0.69   
route: netmask 000000ff doesn't make sense with host route
   
   
1
2
   
   

    
    
   
   

• 正确

[root@nagios ~]# route add –host 211.211.10.69 netmask 255.255.255.0 gw 172.24.30.5 dev em2
   
   
1
   
   

    
    
   
   

• SIOCADDRT：No Such Process
  gw 后指定ip 必须和 em1 或者 em2 同一个网段

• SIOCADDRT：No Such Device
  dev 后指定设备 必须是已经存在的网卡设备

转载来源：http://blog.csdn.net/air_penguin/article/details/51350910