nginx页面不能正常访问排除方法

nginx页面不能访问

1. 检查服务端服务是否启动成功

[root@shizhan02 html]# ps -ef |grep nginx  #查看nginx服务是否启动
root       1609      1  0 16:46 ?        00:00:00 nginx: master process nginx
nginx      1610   1609  0 16:46 ?        00:00:00 nginx: worker process
root       1898   1593  0 18:09 pts/0    00:00:00 grep nginx
[root@shizhan02 html]# lsof -i :80  #检查80端口是否在监听状态
COMMAND  PID  USER   FD   TYPE DEVICE SIZE/OFF NODE NAME
nginx   1609  root    6u  IPv4  11948      0t0  TCP *:http (LISTEN)
nginx   1610 nginx    6u  IPv4  11948      0t0  TCP *:http (LISTEN)
[root@shizhan02 html]# netstat -lnt |grep 80 
tcp        0      0 0.0.0.0:80                  0.0.0.0:*                   LISTEN 

2.在服务端使用wget和curl测试下返回的是否正常

[root@shizhan02 html]# wget 127.0.0.1
--2017-11-20 18:16:58--  http://127.0.0.1/
Connecting to 127.0.0.1:80... connected.
HTTP request sent, awaiting response... 200 OK #返回值200表示链接正常
Length: 612 [text/html]
Saving to: “index.html.2”

100%[===============================================================>] 612         --.-K/s   in 0s      

2017-11-20 18:16:58 (279 MB/s) - “index.html.2” saved [612/612]

[root@shizhan02 html]# curl 127.0.0.1 #返回页面的值表示正常。
<!DOCTYPE html>
<html>
<head>
<title>Welcome to nginx!</title>
<style>
    body {
        width: 35em;
        margin: 0 auto;
        font-family: Tahoma, Verdana, Arial, sans-serif;
    }
</style>
</head>
<body>
<h1>Welcome to nginx!</h1>
<p>If you see this page, the nginx web server is successfully installed and
working. Further configuration is required.</p>

<p>For online documentation and support please refer to
<a href="http://nginx.org/">nginx.org</a>.<br/>
Commercial support is available at
<a href="http://nginx.com/">nginx.com</a>.</p>

<p><em>Thank you for using nginx.</em></p>
</body>
</html>

以上是检测Nginx在服务端安装及浏览是否正常。

3.浏览器,wget或者curl等软件访问不了Ngixn页面。

    1. 关闭SEliun
    ```
    [root@shizhan02 html]# getenforce #查看iptables状态,是否为关闭,以下为关闭状
    态,
    Disabled
    [root@shizhan02 html]# vim /etc/selinux/config #永久关闭iptalbes
    SELINUX=disabled #需要将此行更改为disabled
    SELINUXTYPE=targeted

    [root@shizhan02 html]# setenforce 0 #临时关闭iptables的方法,如果临时能够访问
    了,那么久使用下面的方法添加80端口在iptables的配置文件上
    setenforce: SELinux is disabled

    [root@shizhan02 html]# service iptables status   #检查iptables
    Table: filter
    Chain INPUT (policy ACCEPT)
    num  target     prot opt source               destination         

    Chain FORWARD (policy ACCEPT)
    num  target     prot opt source               destination         

    Chain OUTPUT (policy ACCEPT)
    num  target     prot opt source               destination  

    问题不是出在nginx上,而是出在iptable上,在iptable上添加80端口

    Linux代码  收藏代码
    #vi /etc/sysconfig/iptables  
    //在倒数第二行加入80端口  
    -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j
     ACCEPT  


    //重启iptables  
    #/etc/init.d/iptables restart  
     再通过ip访问  ok~  没问题了
    ```
2. 通过本地客服端测试
    第一步:在客服端ping服务端的ip,我这里的的服务端为192.168.1.202
    ```
    [root@shizhan02 html]# ping 192.168.1.202
    PING 192.168.1.202 (192.168.1.202) 56(84) bytes of data.
    64 bytes from 192.168.1.202: icmp_seq=1 ttl=64 time=0.014 ms
    64 bytes from 192.168.1.202: icmp_seq=2 ttl=64 time=0.024 ms
    ^C
    --- 192.168.1.202 ping statistics ---
    2 packets transmitted, 2 received, 0% packet loss, time 1814ms
    rtt min/avg/max/mdev = 0.014/0.019/0.024/0.005 ms
    #提示按ctrl+c结束
    ```
    第二步:在客户端上telnet服务端ip,端口
    ```
    [root@shizhan02 html]# telnet 192.168.1.202 #返回如下信息表示链接成功
    Trying 192.168.1.202...
    telnet: connect to address 192.168.1.202: Connection refused
    ```

        第三步:在客服端使用wget或者curl命令检测。
        ```
        [root@shizhan02 html]# curl -i 192.168.1.202
        HTTP/1.1 200 OK
        Server: nginx/1.13.6
        Date: Mon, 20 Nov 2017 10:42:31 GMT
        Content-Type: text/html
        Content-Length: 612
        Last-Modified: Mon, 20 Nov 2017 08:08:26 GMT
        Connection: keep-alive
        ETag: "5a128d7a-264"
        Accept-Ranges: bytes

        <!DOCTYPE html>
        <html>
        <head>
        <title>Welcome to nginx!</title>
        <style>
            body {
                width: 35em;
                margin: 0 auto;
                font-family: Tahoma, Verdana, Arial, sans-serif;
            }
        </style>
        </head>
        <body>
        <h1>Welcome to nginx!</h1>
        <p>If you see this page, the nginx web server is successfully
         installed and
        working. Further configuration is required.</p>

        <p>For online documentation and support please refer to
        <a href="http://nginx.org/">nginx.org</a>.<br/>
        Commercial support is available at
        <a href="http://nginx.com/">nginx.com</a>.</p>

        <p><em>Thank you for using nginx.</em></p>
        </body>
        </html>
        ```
        3. 在浏览器访问输入如下的内容,服务器ip.

            http://192.168.1.202/

    ![nginx已经能够成功访问](https://img-blog.csdn.net/20171120104737429?watermark/2/text/aHR0cDovL2Jsb2cuY3Nkbi5uZXQvcXFfMjk3NjczMTc=/font/5a6L5L2T/fontsize/400/fill/I0JBQkFCMA==/dissolve/70/gravity/SouthEast)
    这里有一个小小的坑,希望大家注意一下,使用浏览器输入ip访问的时候,注意清空一下缓存,或者重新打开一下浏览器,有可能让你一直刷新不出页面。
  • 6
    点赞
  • 17
    收藏
    觉得还不错? 一键收藏
  • 6
    评论

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论 6
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值