centos7配置IP

1.配置IP

cat /etc/sysconfig/network-scripts/ifcfg-eth0

HWADDR="00:15:5D:07:F1:02"

TYPE="Ethernet"

BOOTPROTO="static" #dhcp改为static 

DEFROUTE="yes"

PEERDNS="yes"

PEERROUTES="yes"

IPV4_FAILURE_FATAL="no"

IPV6INIT="yes"

IPV6_AUTOCONF="yes"

IPV6_DEFROUTE="yes"

IPV6_PEERDNS="yes"

IPV6_PEERROUTES="yes"

IPV6_FAILURE_FATAL="no"

NAME="eth0"

UUID="bb3a302d-dc46-461a-881e-d46cafd0eb71"

ONBOOT="yes" #开机启用本配置

IPADDR=192.168.7.106 #静态IP

GATEWAY=192.168.7.1 #默认网关

NETMASK=255.255.255.0 #子网掩码

DNS1=192.168.7.1 #DNS 配置

2.重启网络

service network restart

3.查看IP

# ip addr

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN

link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

inet 127.0.0.1/8 scope host lo

valid_lft forever preferred_lft forever

inet6 ::1/128 scope host

valid_lft forever preferred_lft forever

2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 1000

link/ether 00:15:5d:07:f1:02 brd ff:ff:ff:ff:ff:ff

inet 192.168.7.106/24 brd 192.168.7.255 scope global eth0

valid_lft forever preferred_lft forever

inet6 fe80::215:5dff:fe07:f102/64 scope link

valid_lft forever preferred_lft forever