Golang - strings 包

------------------------------------------------------------
strings 包与 bytes 包中的函数用法基本一样,不再赘述。
只对 Replacer 进行说明。
------------------------------------------------------------
// 转换
func ToUpper(s string) string
func ToLower(s string) string
func ToTitle(s string) string
func ToUpperSpecial(_case unicode.SpecialCase, s string) string
func ToLowerSpecial(_case unicode.SpecialCase, s string) string
func ToTitleSpecial(_case unicode.SpecialCase, s string) string
func Title(s string) string

------------------------------
// 比较
func Compare(a, b string) int
func EqualFold(s, t string) bool
------------------------------
// 清理
func Trim(s string, cutset string) string
func TrimLeft(s string, cutset string) string
func TrimRight(s string, cutset string) string
func TrimFunc(s string, f func(rune) bool) string
func TrimLeftFunc(s string, f func(rune) bool) string
func TrimRightFunc(s string, f func(rune) bool) string
func TrimSpace(s string) string
func TrimPrefix(s, prefix string) string
func TrimSuffix(s, suffix string) string
------------------------------
// 拆合
func Split(s, sep string) []string
func SplitN(s, sep string, n int) []string
func SplitAfter(s, sep string) []string
func SplitAfterN(s, sep string, n int) []string

func Fields(s string) []string
func FieldsFunc(s string, f func(rune) bool) []string
func Join(a []string, sep string) string
func Repeat(s string, count int) string
------------------------------
 
// 子串
func HasPrefix(s, prefix string) bool
func HasSuffix(s, suffix string) bool
func Contains(s, substr string) bool
func ContainsRune(s string, r rune) bool
func ContainsAny(s, chars string) bool
func Index(s, sep string) int
func IndexByte(s string, c byte) int
func IndexRune(s string, r rune) int
func IndexAny(s, chars string) int
func IndexFunc(s string, f func(rune) bool) int
 
func LastIndex(s, sep string) int
func LastIndexByte(s string, c byte) int
func LastIndexAny(s, chars string) int
func LastIndexFunc(s string, f func(rune) bool) int

func Count(s, sep string) int
------------------------------
// 替换
func Replace(s, old, new string, n int) string
func Map(mapping func(rune) rune, s string) string
------------------------------------------------------------
type Reader struct { ... }
func NewReader(s string) *Reader
func (r *Reader) Read(b []byte) (n int, err error)
func (r *Reader) ReadAt(b []byte, off int64) (n int, err error)
func (r *Reader) WriteTo(w io.Writer) (n int64, err error)
func (r *Reader) Seek(offset int64, whence int) (int64, error)
func (r *Reader) ReadByte() (byte, error)
func (r *Reader) UnreadByte() error
func (r *Reader) ReadRune() (ch rune, size int, err error)
func (r *Reader) UnreadRune() error
func (r *Reader) Len() int
func (r *Reader) Size() int64
func (r *Reader) Reset(s string)
------------------------------------------------------------
type Replacer struct { ... }
// 创建一个替换规则,参数为“查找内容”和“替换内容”的交替形式。
// 替换操作会依次将第 1 个字符串替换为第 2 个字符串,将第 3 个字符串
// 替换为第 4 个字符串,以此类推。
// 替换规则可以同时被多个例程使用。
func NewReplacer(oldnew ...string) *Replacer
// 使用替换规则对 s 进行替换并返回结果。
func (r *Replacer) Replace(s string) string
// 使用替换规则对 s 进行替换并将结果写入 w。
// 返回写入的字节数和遇到的错误。
func (r *Replacer) WriteString(w io.Writer, s string) (n int, err error)
------------------------------------------------------------

### 回答1: 在 Go 中,你可以使用 `==` 运算符来判断两个字符串是否完全匹配。例如: ``` s1 := "Hello, World" s2 := "Hello, World" if s1 == s2 { fmt.Println("The strings are equal.") } else { fmt.Println("The strings are not equal.") } ``` 上面的代码会输出 "The strings are equal.",因为两个字符串完全匹配。 注意,这种方法只能用于比较两个字符串的完全匹配,如果你想要进行模糊匹配(例如,忽略大小写,或者只匹配字符串的一部分),你可以使用 Go 的内置函数 `strings.EqualFold()` 或 `strings.Contains()`。 例如: ``` s1 := "Hello, World" s2 := "hello, world" if strings.EqualFold(s1, s2) { fmt.Println("The strings are equal (ignoring case).") } else { fmt.Println("The strings are not equal.") } if strings.Contains(s1, "World") { fmt.Println("s1 contains the string 'World'.") } ``` 上面的代码会输出 "The strings are equal (ignoring case)." 和 "s1 contains the string 'World'."。 ### 回答2: golangstrings提供了多种方法来处理字符串,其中括字符串的完全匹配。 要判断一个字符串是否与另一个字符串完全匹配,可以使用strings中的Equal方法。这个方法接收两个字符串作为参数,并返回一个布尔值,表示这两个字符串是否完全相同。 下面是一个使用Equal方法判断字符串是否完全匹配的示例代码: ```go package main import ( "fmt" "strings" ) func main() { str1 := "Hello" str2 := "Hello" if strings.EqualFold(str1, str2) { fmt.Println("字符串完全匹配") } else { fmt.Println("字符串不完全匹配") } } ``` 在这个示例中,我们定义了两个字符串变量str1和str2,并将它们分别赋值为"Hello"。然后,我们使用Equal方法判断这两个字符串是否完全匹配。如果它们完全相同,我们就打印"字符串完全匹配",否则打印"字符串不完全匹配"。 在实际应用中,字符串的完全匹配可以用于判断用户输入是否与特定字符串相等,或者判断两个字符串是否相同等场景。使用strings中的Equal方法,我们可以方便地实现这一功能。 ### 回答3: 在Golang中,可以使用strings中的函数来进行字符串的完全匹配。具体而言,可以使用strings中的EqualFold函数来判断两个字符串是否在不区分大小写的情况下完全匹配。 EqualFold函数的用法是:strings.EqualFold(str1, str2),其中str1和str2分别是要比较的两个字符串。如果两个字符串在不区分大小写的情况下完全匹配,该函数将返回true,否则将返回false。 除了EqualFold函数之外,还可以使用等号直接比较两个字符串,比如str1 == str2。这种方式只有当两个字符串完全相同(括大小写)时才返回true,否则返回false。 需要注意的是,strings中提供的函数只能进行简单的字符串比较,不能进行更为复杂的匹配操作。如果需要进行更复杂的匹配,可能需要使用正则表达式或其他相关的工具。 总之,在Golang中,可以使用strings.EqualFold函数或直接使用等号来判断两个字符串是否完全匹配。
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值