VMware Linux(Centos)虚拟机扩容根目录磁盘空间

https://blog.csdn.net/m0_64206944/article/details/131453844?spm=1001.2014.3001.5506

上述链接为主，融合下面文章中lvextend扩容操作错误处理部分

1:编辑虚拟机设置，点击[硬盘]，选择[扩展] 填写大小:

image

image

点击扩展后VMware提示磁盘已经成功扩展。

image

完成扩展后，需从客户机操作系统内部对磁盘【重新分区】和【扩展文件系统】

2:启动虚拟机操作系统Centos，查看磁盘情况:

1	# fdisk -l

显示如下:

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25

Disk /dev/sda: 32.2 GB, 32212254720 bytes 255 heads, 63 sectors/track, 3916 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00094582    Device Boot      Start         End      Blocks   Id  System /dev/sda1   *           1          64      512000   83  Linux Partition 1 does not end on cylinder boundary. /dev/sda2              64        2611    20458496   8e  Linux LVM Disk /dev/mapper/vg_rxf-lv_root: 18.9 GB, 18865979392 bytes 255 heads, 63 sectors/track, 2293 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_rxf-lv_swap: 2080 MB, 2080374784 bytes 255 heads, 63 sectors/track, 252 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000

可以看见分区情况如下:

1 2 3 4

Device Boot      Start         End      Blocks   Id  System /dev/sda1   *           1          64      512000   83  Linux Partition 1 does not end on cylinder boundary. /dev/sda2              64        2611    20458496   8e  Linux LVM

3:创建分区sda3:
输入指令

1	# fdisk /dev/sda

根据命令提示创建分区:

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

WARNING: DOS-compatible mode is deprecated. It's strongly recommended to          switch off the mode (command 'c') and change display units to          sectors (command 'u'). Command (m for help): n  #输入n表示创建新分区 Command action    e   extended    p   primary partition (1-4) p       #输入p Partition number (1-4): 3 #输入3，表示sda3，前面已经有2个了 First cylinder (2611-3916, default 2611): #回车，默认值 Using default value 2611 Last cylinder, +cylinders or +size{K,M,G} (2611-3916, default 3916):   #回车，默认值 Using default value 3916 Command (m for help): w #输入w保存，退出 The partition table has been altered! Calling ioctl() to re-read partition table. WARNING: Re-reading the partition table failed with error 16: 设备或资源忙. The kernel still uses the old table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8) Syncing disks.

再查看分区情况

1	# fdisk -l

情况如下:

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

Disk /dev/sda: 32.2 GB, 32212254720 bytes 255 heads, 63 sectors/track, 3916 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00094582    Device Boot      Start         End      Blocks   Id  System /dev/sda1   *           1          64      512000   83  Linux Partition 1 does not end on cylinder boundary. /dev/sda2              64        2611    20458496   8e  Linux LVM /dev/sda3            2611        3916    10483750   83  Linux Disk /dev/mapper/vg_rxf-lv_root: 18.9 GB, 18865979392 bytes 255 heads, 63 sectors/track, 2293 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/mapper/vg_rxf-lv_swap: 2080 MB, 2080374784 bytes 255 heads, 63 sectors/track, 252 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000

可以看见现在的分区情况如下:

1 2 3 4 5

Device Boot      Start         End      Blocks   Id  System /dev/sda1   *           1          64      512000   83  Linux Partition 1 does not end on cylinder boundary. /dev/sda2              64        2611    20458496   8e  Linux LVM /dev/sda3            2611        3916    10483750   83  Linux

这时分区已经变成3个了，但是还没有挂载，还不能用。
4:重启操作系统

1

# reboot

5:格式化新分区ext3

1	# mkfs -t ext3 /dev/sda3

显示情况如下:

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

mke2fs 1.41.12 (17-May-2010) 文件系统标签= 操作系统:Linux 块大小=4096 (log=2) 分块大小=4096 (log=2) Stride=0 blocks, Stripe width=0 blocks 655360 inodes, 2620937 blocks 131046 blocks (5.00%) reserved for the super user 第一个数据块=0 Maximum filesystem blocks=2684354560 80 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks:     32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632 正在写入inode表: 完成                             Creating journal (32768 blocks): 完成 Writing superblocks and filesystem accounting information: 完成 This filesystem will be automatically checked every 29 mounts or 180 days, whichever comes first.  Use tune2fs -c or -i to override.

6:将物理硬盘分区初始化为物理卷，以便LVM使用,输入指令

1

# lvs

显示如下：

1 2 3

LV      VG     Attr       LSize  Pool Origin Data%  Move Log Cpy%Sync Convert   lv_root vg_rxf -wi-ao---- 17.57g                                               lv_swap vg_rxf -wi-ao----  1.94g

输入指令:

1	# pvcreate /dev/sda3

显示如下:

1	Physical volume "/dev/sda3" successfully created

7:向卷组中添加物理卷来增加容量。
输入df -h 查看lvm组名

1

# df -h

1 2 3 4

Filesystem                  Size  Used Avail Use% Mounted on /dev/mapper/vg_rxf-lv_root   18G   18G  112M 100% / tmpfs                       931M  4.0K  931M   1% /dev/shm /dev/sda1                   485M   35M  425M   8% /boot

其中vg_rxf为根所在组名.
输入指令，增加卷组的容量

1	# vgextend vg_rxf /dev/sda3

1	Volume group "vg_rxf" successfully extended

8:查看可以扩展的空间大小:

1

vgdisplay

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

--- Volume group ---   VG Name               vg_rxf   System ID               Format                lvm2   Metadata Areas        2   Metadata Sequence No  4   VG Access             read/write   VG Status             resizable   MAX LV                0   Cur LV                2   Open LV               2   Max PV                0   Cur PV                2   Act PV                2   VG Size               29.50 GiB   PE Size               4.00 MiB   Total PE              7553   Alloc PE / Size       4994 / 19.51 GiB   Free  PE / Size       2559 / 10.00 GiB   VG UUID               KFyuD1-cj5n-cukx-z1Zf-Gg2T-IQLT-v6BD4N

Free PE / Size 就是可以提供分配的自由空间，最多10.00 GiB，在扩展时输入小于该值
9:扩充磁盘空间

1	# lvextend -L+9G /dev/mapper/vg_rxf-lv_root /dev/sda3

1 2	Extending logical volume lv_root to 26.57 GiB   Logical volume lv_root successfully resized

10:使用e2fsck指令查看检测文件系统错误

1	# e2fsck -a /dev/mapper/vg_rxf-lv_root

1 2	/dev/mapper/vg_rxf-lv_root is mounted. e2fsck: 无法继续, 中止.

11:使用resize2fs指令来增大或者搜索未加载的"ext2/ext3"文件系统的大小（此处可能出现问题，没办法增大扩容空间）

1	resize2fs /dev/mapper/vg_rxf-lv_root

1 2 3 4

Filesystem at /dev/mapper/vg_rxf-lv_root is mounted on /; on-line resizing required old desc_blocks = 2, new_desc_blocks = 2 Performing an on-line resize of /dev/mapper/vg_rxf-lv_root to 6965248 (4k) blocks. The filesystem on /dev/mapper/vg_rxf-lv_root is now 6965248 blocks long.

11-1（如果11步出现问题，因为我的centos7的某些分区用的是xfs的文件系统（使用df -T查看即可知道）

1 2 3 4 5 6 7 8 9 10

[root@vnode1 ~]# df -T 文件系统                           类型          1K-块        已用        可用          已用%  挂载点 /dev/mapper/centos-root   xfs           37173520 5574340  31599180  15%      / devtmpfs 　　                   devtmpfs  3987400   0              3987400    0%       /dev tmpfs                                 tmpfs        3997856   0              3997856    0%      /dev/shm tmpfs                                 tmpfs        3997856   8628        3989228     1%     /run tmpfs                                 tmpfs        3997856   0               3997856     0%    /sys/fs/cgroup /dev/sda1                          xfs            508588      127152    381436       26%  /boot tmpfs                                tmpfs         799572      0              799572       0%   run/user/0 [root@vnode1 ~]#

将resize2fs替换为xfs_growfs，重新执行一遍即可，如下：

1	[root@vnode1 ~]# xfs_growfs /dev/mapper/vg_rxf-lv_root

12:查看扩展空间后的结果:

1

# df -h

1 2 3 4

Filesystem                  Size  Used Avail Use% Mounted on /dev/mapper/vg_rxf-lv_root   27G   18G  8.9G  66% / tmpfs                       931M  4.0K  931M   1% /dev/shm /dev/sda1                   485M   35M  425M   8% /boot

可以看见，大功告成。

转载：https://www.jianshu.com/p/578816f4e9b8
备注：转载的地方有不对的地方已经在此文进行了修改，看这一篇就够了