MPC5604BC datasheet
MPC5604BC datasheet
TW8844EVB 原理图
TW8844 开发板原理图
LIN-Basic Workshop
LIN-Basic Workshop
Speaker: Andreas Lipowsky
Lipowsky Industrie-Elektronik GmbH
ECU诊断规范
概述
应用层接口服务
应用层协议
各功能单元诊断服务
诊断和通信管理功能单元
数据传输功能单元
传输储存的数据功能单元 14 19
输入输出控制功能单元
远程激活例程功能单元
上传下载功能单元
DBC文件格式
This specification as released by Vector is intended for the purpose of
information only and is provided on an "AS IS" basis only. To the extent
admissible by law, Vector disclaims any warranties or liabilities from the
use of this specification. The unauthorized use, e.g. copying, displaying
or other use of any content from this document is a violation of the law
and intellectual property rights. You must not distribute this specification
to anyone outside of the department or the project for which your company
has received this specification, and in particular the distribution
outside your company is expressly inadmissible.
S32K14X 手册
The S32K14x series is developed according to ISO 26262 and has an integrated safety
concept targeting an ISO26262 ASIL-B integrity level. The following documentation
supports the integration of an S32K14x chip into safety-related systems:
• Reference Manual (S32K14xRM): describes the programming model and
functionality of S32K14x chips
• Data Sheet (S32K14x): describes S32K14x operating conditions as well as timing
and electrical characteristics
• Safety Manual (S32K14xSM): describes the S32K14x safety concept and possible
safety mechanisms (integrated in S32K14x, system-level hardware, or system-level
software) as well as measures to reduce dependent failures
• Dynamic FMEDA: inductive analysis enabling customization of system-level safety
mechanisms, including the resulting safety metrics for ISO 26262 (SPFM, LFM &
PMHF) and IEC 61508 (SFF & Beta IC Factor)
• FMEDA Report: describes the FMEDA methodology and safety mechanisms
supported in the FMEDA, including source of failure rates, failure modes, and
assumptions during the analysis
The S32K14x series is a SafeAssure™ solution. For more information regarding
functional safety at NXP, visit http://www.nxp.com/safeassure.
MPC5748GRM 完整版本手册
The MPC5748G is a 32-bit Power Architecture® based microcontroller unit (MCU) for
automotive applications and builds on the successful legacy of the MPC56xx family of
microcontrollers.
rh850f1l F1L系列单片机
The features of the RH850/F1L are described below.
The RH850/F1L is a 32-bit single-chip microcontroller with a G3K core. The key features of the F1L
are low power consumption, high computational processing power, and a wide variety of internal
peripheral functions. To reduce supply current in a variety of applications, a wide range of power
reducing measures are available. For example, there is a Low Power Sampler (LPS), that can poll
signals input to the analog and digital input pins without using the CPU, and DeepSTOP mode, in
which the power supply to the most circuits of the microcontroller can be turned off.
Applications
The RH850/F1L is ideal for automotive electronics such as BCM (body control module), gateway,
HVAC, lighting modules, and many others.
rh850f1k 系列datasheet
The features of the RH850/F1K are described below.
The RH850/F1K is a 32-bit single-chip microcontroller with a G3KH CPU core. The key features of
the F1K are low power consumption, high computational processing power, and a wide variety of
internal peripheral functions. To reduce supply current in a variety of applications, a wide range of
power reducing measures are available. For example, there is a Low Power Sampler (LPS), that can
poll signals input to the analog and digital input pins without CPU core interaction, and DeepSTOP
mode in which the power supply to the most circuits of the microcontroller can be turned off.
Applications
The RH850/F1K is ideal for automotive electronics, such as BCM (body control module), gateway,
HVAC, lighting modules, and many other applications.
MISRA-C-2004(中文版)
Guidelines
for the use
of the
C language
in critical systems
lm73605 LM73605/LM73606 3.5V 至36V、5A 或6A 同步 降压转换器
同步整流
• 可湿侧面QFN 封装(WQFN)
• 低静态电流
– 关断模式下0.8μA(典型值)
– 无负载有源模式下15μA(典型值)
• 宽电压转换范围:
– tON-MIN = 60ns(典型值)
– tOFF-MIN = 70ns(典型值)
• 低MOSFET 导通电阻:
– RDS_ON_HS = 53mΩ(典型值)
– RDS_ON_LS = 31mΩ(典型值)
• 具有用于提高效率的外部偏置输入
• 引脚可选自动模式或强制PWM 工作模式
• 可调频率范围:350kHz 至2.2MHz
• 可与外部时钟同步
• 内部补偿
• 电源正常状态标志
• 具有用于对系统UVLO 进行编程的精密使能功能
• 灵活的软启动特性:
– 启动至预偏置负载
– 固定或可调的软启动时间
– 输出电压跟踪
• 逐周期电流限制
• 具有断续模式的短路保护
• 热关断保护
TW8844 全高清LCD视频处理器。
InterSIL推出业内首款专门针对汽车应用的全高清LCD视频处理器。
高度集成的TW8844可即时显示后视摄像头实况视频,使防止倒车事故的能力超出行业标准4倍。
美国加州、MILPITAS---2017年7月11日—全球领先的半导体解决方案供应商瑞萨电子株式会社(TSE:6723)子公司Intersil今天宣布,推出可与最新一代汽车SoC相连接的业内首款专门为汽车应用而设计的全高清LCD视频处理器---TW8844。高度集成的TW8844是建立在Intersil业内领先的车载信息娱乐和显示系统等领域的技术之上,是首个具有模拟视频解码器、两个标量和MIPI-CSI2 SoC接口的高清(HD)1080p LCD视频处理器。
sn65dsi84 MIPI® DSI 桥转FLATLINK™ LVDS
SN65DSI84 MIPI® DSI 桥转FLATLINK™ LVDS
单通道DSI 转双链路LVDS 桥接器
1 特性
1• 实现MIPI®D-PHY 1.00.00 版本的物理层前端和
1.02.00 版本的显示串行接口(DSI)
• 单通道DSI 接收器在每个通道上可针对1 条、2
条、3 条或4 条D-PHY 数据信道进行配置,每信
道的运行速率高达1Gbps
• 支持格式为RGB666 和RGB888 的18bpp 和
24bpp DSI 视频数据包
• 适用于60fps WUXGA 1920 × 1200 分辨率
(18bpp 和24bpp 彩色)和60fps 1366 ×
768(18bpp 和24bpp)
• Flatlink™针对单链路或双链路LVDS 的输出配置
• 支持单通道DSI 至双链路LVDS 运行模式
• 在双链路或单链路模式下,LVDS 输出时钟范围为
25MHz 至154MHz
• LVDS 像素时钟可采用自由运行持续D-PHY 时钟
或外部基准时钟(REFCLK)
• 1.8V 主VCC 电源
• 低功耗特性包括关断模式、低LVDS 输出电压摆
幅、共模以及MIPI 超低功耗状态(ULPS) 支持
• 针对简化印刷电路板(PCB) 走线的LVDS 通道交
换(SWAP),LVDS 引脚顺序反向特性
• 静电放电(ESD) 额定值±2kV(人体放电模式
(HBM))
• 采用64 引脚5mm × 5mm BGA (ZQE) 封装
• 温度范围:-40°C 至85°C
TJA1080 FlexRay transceiver
The TJA1080 is a FlexRay transceiver, which is compatible with the FlexRay electrical
physical layer specification V2.1 Rev. A (see Ref. 1). It is primarily intended for
communication systems from 1 Mbit/s to 10 Mbit/s, and provides an advanced interface
between the protocol controller and the physical bus in a FlexRay network.
The TJA1080 can be configured to be used as an active star transceiver or as a node
transceiver.
The TJA1080 provides differential transmit capability to the network and differential
receive capability to the FlexRay controller. It offers excellent EMC performance as well as
high ESD protection.
The TJA1080 actively monitors the system performance using dedicated error and status
information (readable by any microcontroller), as well as internal voltage and temperature
monitoring.
The TJA1080 supports the mode control as used in Philips TJA1054 (see Ref. 2) and
TJA1041 (see Ref. 3) CAN transceivers.
TPS7B770x-Q1
适用于汽车电子应用
• 具有符合AEC-Q100 的下列结果:
– 器件温度1 级:-40°C 至125°C 的环境运行温
度范围
– 器件人体放电模式(HBM) 静电放电(ESD) 分类
等级2
– 器件组件充电模式(CDM) ESD 分类等级C4B
• 具有电流感测和可调节限流功能的单通道和双通道
低压降稳压器(LDO)
• 宽输入电压范围:4.5V 至40V(45V 负载突降保
护)
• FB 接至GND 时进入电源开关模式
• 可调节输出电压范围:1.5V 至20V
• 每通道输出电流高达300mA
• 可通过外部电阻实现可调节限流功能
• 高精度电流感测功能,无需进一步校准即可在低电
流下检测天线开路情况
• 高电源抑制比:100Hz 时的典型值为73dB
• 集成反向极性保护,低至-40V 且无需外部二极管
• 100mA 负载下的最大压降为500mV
• 与2.2μF 至100μF 范围内的(等效串联电阻
(ESR) 为1mΩ 至5Ω)输出电容搭配使用时可保持
稳定
• 集成了保护和诊断功能
TPS2543 USB charging
The TPS2543 is a USB charging port controller and
Charging Specification 1.2 power switch with an integrated USB 2.0 high-speed
data line (D+/D–) switch. The TPS2543 provides the
• D+/D– Shorted Mode per Chinese electrical signatures on D+/D– to support the
Telecommunication Industry Standard YD/T following charging schemes:
1591-2009 • USB Battery Charging Specification 1.2;
• D+/D– Divider Modes 2.0V/2.7V and 2.7/2.0V • Chinese Telecom Standard YD/T 1591-2009;
Compliant with 1A and 2A Apple Mobile Digital • Divider Mode, Compliant with Apple iPod, iPhone
Devices (1A), and iPad (2A) Mobile Digital Devices.(1)
• Automatic Selection of D+/D– Mode for an
Attached Device The TPS2543 can be configured to automatically select the D+/D– mode needed to charge an attached
• Supports Sleep-Mode Charging and device. The TPS2543 provides load detection via the
Mouse/Keyboard (Low-Speed Only) Wake Up STATUS pin that allows for both power supply control
• Load Detection for Both Power Supply Control in S4/S5 charging and the ability to manage port
in S4/S5 Charging and Port Power power in a multi-port application. Additionally, system
Management in all Charge Modes wake up (from S3) with a mouse/keyboard (low
speed only) is fully supported in the TPS2343.
• Compatible with USB 2.0 and 3.0 Power Switch
Requirements The TPS2543 73-mΩ power-distribution switch is
intended for applications where heavy capacitive
• 73-mΩ (typ) High-Side MOSFET loads and short-circuits are likely to be encountered.
• Adjustable Current-Limit up to 3.0 A (typ) Two programmable current thresholds provide
• Operating Range: 4.5 V to 5.5 V flexibility for setting current limits and load detect
• Drop-In Compatible with TPS2540/40A thresholds.
• Available in 16-Pin QFN (3x3) Package
• UL Listed and CB File No. E169910
TPS54340 电源DCDC
4.5 V to 42 V (45 V Abs Max) Input Range
• 3.5 A Continuous Current, 4.5 A Minimum Peak
Inductor Current Limit
• Current Mode Control DC-DC Converter
• 92-mΩ High-Side MOSFET
• High Efficiency at Light Loads with Pulse Skipping
Eco-mode™
• Low Dropout at Light Loads with Integrated BOOT
Recharge FET
• 146 μA Operating Quiescent Current
• 1 μA Shutdown Current
• 100 kHz to 2.5 MHz Fixed Switching Frequency
• Synchronizes to External Clock
• Adjustable UVLO Voltage and Hysteresis
• Internal Soft-Start
• Accurate Cycle-by-Cycle Current Limit
• Thermal, Overvoltage, and Frequency Foldback
Protection
• 0.8 V 1% Internal Voltage Reference
• 8-Terminal HSOP with PowerPAD™ Package
• –40°C to 150°C TJ Operating Range
• Create a Custom Design Using the TPS54340
USB2422 USB HUB
The Microchip USB2422 hub is a low-power, single
transaction translator, hub controller IC with two downstream
ports for embedded USB solutions. The hub
controller can attach to an upstream port as a Hi-Speed
and Full-Speed hub or as a Full-Speed only hub. The
hub supports Low-Speed, Full-Speed, and Hi-Speed
(when configured as a Hi-Speed hub) downstream
devices on the enabled downstream ports.
All required resistors on the USB ports are integrated
USB3803 carplay usb hub
USB 2.0 High-Speed Hub Controller Optimized for Portable Applications
E522.41 USB charge IC
E522.41 USB charge IC;Automotive USB Supply with Data-Line Protection and I2C Interface
tw8836英文资料
tw8836数据手册,目前最全 最详细 英文
三星 4412数据手册
三星 4412数据手册 英文 全 包涵所有模块 SCP
行驶记录仪方案器件资料
行驶记录仪方案器件资料 全资料 整个bom
mc52ir3 资料
mc52ir3 包涵手册 atc指令 硬件信息等 tcp透传说明
mc52ir3 atc指令
mc52ir3 ATC指令 详细的ATC指令
stm32 fatfs文件系统读取
stm32 fatfs文件系统读取 可以直接使用
stm32f205 IAP程序
stm32f205 IAP程序 可以直接是使用
lpc177x_8x_2nd_USBHost_bootloader_v3
lpc177x_8x_2nd_USBHost_bootloader_v3
LPC177X 178X 中文数据手册
LPC177X 178X 中文数据手册 齐全
stm32107代码 文档
stm32107代码 文档 可以快速了解105 107的特色 包涵功能代码
NEO-M8 6资料
NEO-M8 6 GPS芯片资料,包涵6 8 多个
西门子2G模块 资料
西门子2G模块 资料 包括指令, 手册,原理