// cmsis_os.c
/* ----------------------------------------------------------------------
* $Date: 5. February 2013
* $Revision: V1.02
*
* Project: CMSIS-RTOS API
* Title: cmsis_os.c
*
* Version 0.02
* Initial Proposal Phase
* Version 0.03
* osKernelStart added, optional feature: main started as thread
* osSemaphores have standard behavior
* osTimerCreate does not start the timer, added osTimerStart
* osThreadPass is renamed to osThreadYield
* Version 1.01
* Support for C++ interface
* - const attribute removed from the osXxxxDef_t typedef's
* - const attribute added to the osXxxxDef macros
* Added: osTimerDelete, osMutexDelete, osSemaphoreDelete
* Added: osKernelInitialize
* Version 1.02
* Control functions for short timeouts in microsecond resolution:
* Added: osKernelSysTick, osKernelSysTickFrequency, osKernelSysTickMicroSec
* Removed: osSignalGet
*
*
*----------------------------------------------------------------------------
*
* Portions Copyright ?2016 STMicroelectronics International N.V. All rights reserved.
* Portions Copyright (c) 2013 ARM LIMITED
* All rights reserved.
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* - Neither the name of ARM nor the names of its contributors may be used
* to endorse or promote products derived from this software without
* specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*---------------------------------------------------------------------------*/
/**
******************************************************************************
* @file cmsis_os.c
* @author MCD Application Team
* @date 03-March-2017
* @brief CMSIS-RTOS API implementation for FreeRTOS V9.0.0
******************************************************************************
* @attention
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted, provided that the following conditions are met:
*
* 1. Redistribution of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of other
* contributors to this software may be used to endorse or promote products
* derived from this software without specific written permission.
* 4. This software, including modifications and/or derivative works of this
* software, must execute solely and exclusively on microcontroller or
* microprocessor devices manufactured by or for STMicroelectronics.
* 5. Redistribution and use of this software other than as permitted under
* this license is void and will automatically terminate your rights under
* this license.
*
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
#include <string.h>
#include "cmsis_os.h"
/*
* ARM Compiler 4/5
*/
#if defined ( __CC_ARM )
#define __ASM __asm
#define __INLINE __inline
#define __STATIC_INLINE static __inline
#include "cmsis_armcc.h"
/*
* GNU Compiler
*/
#elif defined ( __GNUC__ )
#define __ASM __asm /*!< asm keyword for GNU Compiler */
#define __INLINE inline /*!< inline keyword for GNU Compiler */
#define __STATIC_INLINE static inline
#include "cmsis_gcc.h"
/*
* IAR Compiler
*/
#elif defined ( __ICCARM__ )
#ifndef __ASM
#define __ASM __asm
#endif
#ifndef __INLINE
#define __INLINE inline
#endif
#ifndef __STATIC_INLINE
#define __STATIC_INLINE static inline
#endif
#include <cmsis_iar.h>
#endif
extern void xPortSysTickHandler(void);
/* Convert from CMSIS type osPriority to FreeRTOS priority number */
static unsigned portBASE_TYPE makeFreeRtosPriority (osPriority priority)
{
unsigned portBASE_TYPE fpriority = tskIDLE_PRIORITY;
if (priority != osPriorityError) {
fpriority += (priority - osPriorityIdle);
}
return fpriority;
}
#if (INCLUDE_uxTaskPriorityGet == 1)
/* Convert from FreeRTOS priority number to CMSIS type osPriority */
static osPriority makeCmsisPriority (unsigned portBASE_TYPE fpriority)
{
osPriority priority = osPriorityError;
if ((fpriority - tskIDLE_PRIORITY) <= (osPriorityRealtime - osPriorityIdle)) {
priority = (osPriority)((int)osPriorityIdle + (int)(fpriority - tskIDLE_PRIORITY));
}
return priority;
}
#endif
/* Determine whether we are in thread mode or handler mode. */
static int inHandlerMode (void)
{
return __get_IPSR() != 0;
}
/*********************** Kernel Control Functions *****************************/
/**
* @brief Initialize the RTOS Kernel for creating objects.
* @retval status code that indicates the execution status of the function.
* @note MUST REMAIN UNCHANGED: \b osKernelInitialize shall be consistent in every CMSIS-RTOS.
*/
osStatus osKernelInitialize (void);
/**
* @brief Start the RTOS Kernel with executing the specified thread.
* @param thread_def thread definition referenced with \ref osThread.
* @param argument pointer that is passed to the thread function as start argument.
* @retval status code that indicates the execution status of the function
* @note MUST REMAIN UNCHANGED: \b osKernelStart shall be consistent in every CMSIS-RTOS.
*/
osStatus osKernelStart (void)
{
vTaskStartScheduler();
return osOK;
}
/**
* @brief Check if the RTOS kernel is already started
* @param None
* @retval (0) RTOS is not started
* (1) RTOS is started
* (-1) if this feature is disabled in FreeRTOSConfig.h
* @note MUST REMAIN UNCHANGED: \b osKernelRunning shall be consistent in every CMSIS-RTOS.
*/
int32_t osKernelRunning(void)
{
#if ( ( INCLUDE_xTaskGetSchedulerState == 1 ) || ( configUSE_TIMERS == 1 ) )
if (xTaskGetSchedulerState() == taskSCHEDULER_NOT_STARTED)
return 0;
else
return 1;
#else
return (-1);
#endif
}
#if (defined (osFeature_SysTick) && (osFeature_SysTick != 0)) // System Timer available
/**
* @brief Get the value of the Kernel SysTick timer
* @param None
* @retval None
* @note MUST REMAIN UNCHANGED: \b osKernelSysTick shall be consistent in every CMSIS-RTOS.
*/
uint32_t osKernelSysTick(void)
{
if (inHandlerMode()) {
return xTaskGetTickCountFromISR();
}
else {
return xTaskGetTickCount();
}
}
#endif // System Timer available
/*********************** Thread Management *****************************/
/**
* @brief Create a thread and add it to Active Threads and set it to state READY.
* @param thread_def thread definition referenced with \ref osThread.
* @param argument pointer that is passed to the thread function as start argument.
* @retval thread ID for reference by other functions or NULL in case of error.
* @note MUST REMAIN UNCHANGED: \b osThreadCreate shall be consistent in every CMSIS-RTOS.
*/
osThreadId osThreadCreate (const osThreadDef_t *thread_def, void *argument)
{
TaskHandle_t handle;
#if( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
if((thread_def->buffer != NULL) && (thread_def->controlblock != NULL)) {
handle = xTaskCreateStatic((TaskFunction_t)thread_def->pthread,(const portCHAR *)thread_def->name,
thread_def->stacksize, argument, makeFreeRtosPriority(thread_def->tpriority),
thread_def->buffer, thread_def->controlblock);
}
else {
if (xTaskCreate((TaskFunction_t)thread_def->pthread,(const portCHAR *)thread_def->name,
thread_def->stacksize, argument, makeFreeRtosPriority(thread_def->tpriority),
&handle) != pdPASS) {
return NULL;
}
}
#elif( configSUPPORT_STATIC_ALLOCATION == 1 )
handle = xTaskCreateStatic((TaskFunction_t)thread_def->pthread,(const portCHAR *)thread_def->name,
thread_def->stacksize, argument, makeFreeRtosPriority(thread_def->tpriority),
thread_def->buffer, thread_def->controlblock);
#else
if (xTaskCreate((TaskFunction_t)thread_def->pthread,(const portCHAR *)thread_def->name,
thread_def->stacksize, argument, makeFreeRtosPriority(thread_def->tpriority),
&handle) != pdPASS) {
return NULL;
}
#endif
return handle;
}
/**
* @brief Return the thread ID of the current running thread.
* @retval thread ID for reference by other functions or NULL in case of error.
* @note MUST REMAIN UNCHANGED: \b osThreadGetId shall be consistent in every CMSIS-RTOS.
*/
osThreadId osThreadGetId (void)
{
#if ( ( INCLUDE_xTaskGetCurrentTaskHandle == 1 ) || ( configUSE_MUTEXES == 1 ) )
return xTaskGetCurrentTaskHandle();
#else
return NULL;
#endif
}
/**
* @brief Terminate execution of a thread and remove it from Active Threads.
* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId.
* @retval status code that indicates the execution status of the function.
* @note MUST REMAIN UNCHANGED: \b osThreadTerminate shall be consistent in every CMSIS-RTOS.
*/
osStatus osThreadTerminate (osThreadId thread_id)
{
#if (INCLUDE_vTaskDelete == 1)
vTaskDelete(thread_id);
return osOK;
#else
return osErrorOS;
#endif
}
/**
* @brief Pass control to next thread that is in state \b READY.
* @retval status code that indicates the execution status of the function.
* @note MUST REMAIN UNCHANGED: \b osThreadYield shall be consistent in every CMSIS-RTOS.
*/
osStatus osThreadYield (void)
{
taskYIELD();
return osOK;
}
/**
* @brief Change priority of an active thread.
* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId.
* @param priority new priority value for the thread function.
* @retval status code that indicates the execution status of the function.
* @note MUST REMAIN UNCHANGED: \b osThreadSetPriority shall be consistent in every CMSIS-RTOS.
*/
osStatus osThreadSetPriority (osThreadId thread_id, osPriority priority)
{
#if (INCLUDE_vTaskPrioritySet == 1)
vTaskPrioritySet(thread_id, makeFreeRtosPriority(priority));
return osOK;
#else
return osErrorOS;
#endif
}
/**
* @brief Get current priority of an active thread.
* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId.
* @retval current priority value of the thread function.
* @note MUST REMAIN UNCHANGED: \b osThreadGetPriority shall be consistent in every CMSIS-RTOS.
*/
osPriority osThreadGetPriority (osThreadId thread_id)
{
#if (INCLUDE_uxTaskPriorityGet == 1)
if (inHandlerMode())
{
return makeCmsisPriority(uxTaskPriorityGetFromISR(thread_id));
}
else
{
return makeCmsisPriority(uxTaskPriorityGet(thread_id));
}
#else
return osPriorityError;
#endif
}
/*********************** Generic Wait Functions *******************************/
/**
* @brief Wait for Timeout (Time Delay)
* @param millisec time delay value
* @retval status code that indicates the execution status of the function.
*/
osStatus osDelay (uint32_t millisec)
{
#if INCLUDE_vTaskDelay
TickType_t ticks = millisec / portTICK_PERIOD_MS;
vTaskDelay(ticks ? ticks : 1); /* Minimum delay = 1 tick */
return osOK;
#else
(void) millisec;
return osErrorResource;
#endif
}
#if (defined (osFeature_Wait) && (osFeature_Wait != 0)) /* Generic Wait available */
/**
* @brief Wait for Signal, Message, Mail, or Timeout
* @param millisec timeout value or 0 in case of no time-out
* @retval event that contains signal, message, or mail information or error code.
* @note MUST REMAIN UNCHANGED: \b osWait shall be consistent in every CMSIS-RTOS.
*/
osEvent osWait (uint32_t millisec);
#endif /* Generic Wait available */
/*********************** Timer Management Functions ***************************/
/**
* @brief Create a timer.
* @param timer_def timer object referenced with \ref osTimer.
* @param type osTimerOnce for one-shot or osTimerPeriodic for periodic behavior.
* @param argument argument to the timer call back function.
* @retval timer ID for reference by other functions or NULL in case of error.
* @note MUST REMAIN UNCHANGED: \b osTimerCreate shall be consistent in every CMSIS-RTOS.
*/
osTimerId osTimerCreate (const osTimerDef_t *timer_def, os_timer_type type, void *argument)
{
#if (configUSE_TIMERS == 1)
#if( ( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 ) )
if(timer_def->controlblock != NULL) {
return xTimerCreateStatic((const char *)"",
1, // period should be filled when starting the Timer using osTimerStart
(type == osTimerPeriodic) ? pdTRUE : pdFALSE,
(void *) argument,
(TaskFunction_t)timer_def->ptimer,
(StaticTimer_t *)timer_def->controlblock);
}
else {
return xTimerCreate((const char *)"",
1, // period should be filled when starting the Timer using osTimerStart
(type == osTimerPeriodic) ? pdTRUE : pdFALSE,
(void *) argument,
(TaskFunction_t)timer_def->ptimer);
}
#elif( configSUPPORT_STATIC_ALLOCATION == 1 )
return xTimerCreateStatic((const char *)"",
1, // period should be filled when starting the Timer using osTimerStart
(type == osTimerPeriodic) ? pdTRUE : pdFALSE,
(void *) argument,
(TaskFunction_t)timer_def->ptimer,
(StaticTimer_t *)timer_def->controlblock);
#else
return xTimerCreate((const char *)"",
1, // period should be filled when starting the Timer using osTimerStart
(type == osTimerPeriodic) ? pdTRUE : pdFALSE,
(void *) argument,
(TaskFunction_t)timer_def->ptimer);
#endif
#else
return NULL;
#endif
}
/**
* @brief Start or restart a timer.
* @param timer_id timer ID obtained by \ref osTimerCreate.
* @param millisec time delay value of the timer.
* @retval status code that indicates the execution status of the function
* @note MUST REMAIN UNCHANGED: \b osTimerStart shall be consistent in every CMSIS-RTOS.
*/
osStatus osTimerStart (osTimerId timer_id, uint32_t millisec)
{
osStatus result = osOK;
#if (configUSE_TIMERS == 1)
portBASE_TYPE taskWoken = pdFALSE;
TickType_t ticks = millisec / portTICK_PERIOD_MS;
if (ticks == 0)
ticks = 1;
if (inHandlerMode())
{
if (xTimerChangePeriodFromISR(timer_id, ticks, &taskWoken) != pdPASS)
{
result = osErrorOS;
}
else
{
portEND_SWITCHING_ISR(taskWoken);
}
}
else
{
if (xTimerChangePeriod(timer_id, ticks, 0) != pdPASS)
result = osErrorOS;
}
#else
result = osErrorOS;
#endif
return result;
}
/**
* @brief Stop a timer.
* @param timer_id timer ID obtained by \ref osTimerCreate
* @retval status code that indicates the execution status of the function.
* @note MUST REMAIN UNCHANGED: \b osTimerStop shall be consistent in every CMSIS-RTOS.
*/
osStatus osTimerStop (osTimerId timer_id)
{
osStatus result = osOK;
#if (configUSE_TIMERS == 1)
portBASE_TYPE taskWoken = pdFALSE;
if (inHandlerMode()) {
if (xTimerStopFromISR(timer_id, &taskWoken) != pdPASS) {
return osErrorOS;
}
portEND_SWITCHING_ISR(taskWoken);
}
else {
if (xTimerStop(timer_id, 0) != pdPASS) {
result = osErrorOS;
}
}
#else
result = osErrorOS;
#endif
return result;
}
/**
* @brief Delete a timer.
* @param timer_id timer ID obtained by \ref osTimerCreate
* @retval status code that indicates the execution status of the function.
* @note MUST REMAIN UNCHANGED: \b osTimerDelete shall be consistent in every CMSIS-RTOS.
*/
osStatus osTimerDelete (osTimerId timer_id)
{
osStatus result = osOK;
#if (configUSE_TIMERS == 1)
if (inHandlerMode()) {
return osErrorISR;
}
else {
if ((xTimerDelete(timer_id, osWaitForever )) != pdPASS) {
result = osErrorOS;
}
}
#else
result = osErrorOS;
#endif
return result;
}
/*************************** Signal Management ********************************/
/**
* @brief Set the specified Signal Flags of an active thread.
* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId.
* @param signals specifies the signal flags of the thread that should be set.
* @retval previous signal flags of the specified thread or 0x80000000 in case of incorrect parameters.
* @note MUST REMAIN UNCHANGED: \b osSignalSet shall be consistent in every CMSIS-RTOS.
*/
int32_t osSignalSet (osThreadId thread_id, int32_t signal)
{
#if( configUSE_TASK_NOTIFICATIONS == 1 )
BaseType_t xHigherPriorityTaskWoken = pdFALSE;
uint32_t ulPreviousNotificationValue = 0;
if (inHandlerMode())
{
if(xTaskGenericNotifyFromISR( thread_id , (uint32_t)signal, eSetBits, &ulPreviousNotificationValue, &xHigherPriorityTaskWoken ) != pdPASS )
return 0x80000000;
portYIELD_FROM_ISR( xHigherPriorityTaskWoken );
}
else if(xTaskGenericNotify( thread_id , (uint32_t)signal, eSetBits, &ulPreviousNotificationValue) != pdPASS )
return 0x80000000;
return ulPreviousNotificationValue;
#else
(void) thread_id;
(void) signal;
return 0x80000000; /* Task Notification not supported */
#endif
}
/**
* @brief Clear the specified Signal Flags of an active thread.
* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId.
* @param signals specifies the signal flags of the thread that shall be cleared.
* @retval previous signal flags of the specified thread or 0x80000000 in case of incorrect parameters.
* @note MUST REMAIN UNCHANGED: \b osSignalClear shall be consistent in every CMSIS-RTOS.
*/
int32_t osSignalClear (osThreadId thread_id, int32_t signal);
/**
* @brief Wait for one or more Signal Flags to become signaled for the current \b RUNNING thread.
* @param signals wait until all specified signal flags set or 0 for any single signal flag.
* @param millisec timeout value or 0 in case of no time-out.
* @retval event flag information or error code.
* @note MUST REMAIN UNCHANGED: \b osSignalWait shall be consistent in every CMSIS-RTOS.
*/
osEvent osSignalWait (int32_t signals, uint32_t millisec)
{
osEvent ret;
#if( configUSE_TASK_NOTIFICATIONS == 1 )
TickType_t ticks;
ret.value.signals = 0;
ticks = 0;
if (millisec == osWaitForever) {
ticks = portMAX_DELAY;
}
else if (millisec != 0) {
ticks = millisec / portTICK_PERIOD_MS;
if (ticks == 0) {
ticks = 1;
}
}
if (inHandlerMode())
{
ret.status = osErrorISR; /*Not allowed in ISR*/
}
else
{
if(xTaskNotifyWait( 0,(uint32_t) signals, (uint32_t *)&ret.value.signals, ticks) != pdTRUE)
{
if(ticks == 0) ret.status = osOK;
else ret.status = osEventTimeout;
}
else if(ret.value.signals < 0)
{
ret.status = osErrorValue;
}
else ret.status = osEventSignal;
}
#else
(void) signals;
(void) millisec;
ret.status = osErrorOS; /* Task Notification not supported */
#endif
return ret;
}
/**************************** Mutex Management ********************************/
/**
* @brief Create and Initialize a Mutex object
* @param mutex_def mutex definition referenced with \ref osMutex.
* @retval mutex ID for reference by other functions or NULL in case of error.
* @note MUST REMAIN UNCHANGED: \b osMutexCreate shall be consistent in every CMSIS-RTOS.
*/
osMutexId osMutexCreate (const osMutexDef_t *mutex_def)
{
#if ( configUSE_MUTEXES == 1)
#if( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
if (mutex_def->controlblock != NULL) {
return xSemaphoreCreateMutexStatic( mutex_def->controlblock );
}
else {
return xSemaphoreCreateMutex();
}
#elif ( configSUPPORT_STATIC_ALLOCATION == 1 )
return xSemaphoreCreateMutexStatic( mutex_def->controlblock );
#else
return xSemaphoreCreateMutex();
#endif
#else
return NULL;
#endif
}
/**
* @brief Wait until a Mutex becomes available
* @param mutex_id mutex ID obtained by \ref osMutexCreate.
* @param millisec timeout value or 0 in case of no time-out.
* @retval status code that indicates the execution status of the function.
* @note MUST REMAIN UNCHANGED: \b osMutexWait shall be consistent in every CMSIS-RTOS.
*/
osStatus osMutexWait (osMutexId mutex_id, uint32_t millisec)
{
TickType_t ticks;
portBASE_TYPE taskWoken = pdFALSE;
if (mutex_id == NULL) {
return osErrorParameter;
}
ticks = 0;
if (millisec == osWaitForever) {
ticks = portMAX_DELAY;
}
else if (millisec != 0) {
ticks = millisec / portTICK_PERIOD_MS;
if (ticks == 0) {
ticks = 1;
}
}
if (inHandlerMode()) {
if (xSemaphoreTakeFromISR(mutex_id, &taskWoken) != pdTRUE) {
return osErrorOS;
}
portEND_SWITCHING_ISR(taskWoken);
}
else if (xSemaphoreTake(mutex_id, ticks) != pdTRUE) {
return osErrorOS;
}
return osOK;
}
/**
* @brief Release a Mutex that was obtained by \ref osMutexWait
* @param mutex_id mutex ID obtained by \ref osMutexCreate.
* @retval status code that indicates the execution status of the function.
* @note MUST REMAIN UNCHANGED: \b osMutexRelease shall be consistent in every CMSIS-RTOS.
*/
osStatus osMutexRelease (osMutexId mutex_id)
{
osStatus result = osOK;
portBASE_TYPE taskWoken = pdFALSE;
if (inHandlerMode()) {
if (xSemaphoreGiveFromISR(mutex_id, &taskWoken) != pdTRUE) {
return osErrorOS;
}
portEND_SWITCHING_ISR(taskWoken);
}
else if (xSemaphoreGive(mutex_id) != pdTRUE)
{
result = osErrorOS;
}
return result;
}
/**
* @brief Delete a Mutex
* @param mutex_id mutex ID obtained by \ref osMutexCreate.
* @retval status code that indicates the execution status of the function.
* @note MUST REMAIN UNCHANGED: \b osMutexDelete shall be consistent in every CMSIS-RTOS.
*/
osStatus osMutexDelete (osMutexId mutex_id)
{
if (inHandlerMode()) {
return osErrorISR;
}
vQueueDelete(mutex_id);
return osOK;
}
/******************** Semaphore Management Functions **************************/
#if (defined (osFeature_Semaphore) && (osFeature_Semaphore != 0))
/**
* @brief Create and Initialize a Semaphore object used for managing resources
* @param semaphore_def semaphore definition referenced with \ref osSemaphore.
* @param count number of available resources.
* @retval semaphore ID for reference by other functions or NULL in case of error.
* @note MUST REMAIN UNCHANGED: \b osSemaphoreCreate shall be consistent in every CMSIS-RTOS.
*/
osSemaphoreId osSemaphoreCreate (const osSemaphoreDef_t *semaphore_def, int32_t count)
{
#if( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
osSemaphoreId sema;
if (semaphore_def->controlblock != NULL){
if (count == 1) {
return xSemaphoreCreateBinaryStatic( semaphore_def->controlblock );
}
else {
#if (configUSE_COUNTING_SEMAPHORES == 1 )
return xSemaphoreCreateCountingStatic( count, count, semaphore_def->controlblock );
#else
return NULL;
#endif
}
}
else {
if (count == 1) {
vSemaphoreCreateBinary(sema);
return sema;
}
else {
#if (configUSE_COUNTING_SEMAPHORES == 1 )
return xSemaphoreCreateCounting(count, count);
#else
return NULL;
#endif
}
}
#elif ( configSUPPORT_STATIC_ALLOCATION == 1 ) // configSUPPORT_DYNAMIC_ALLOCATION == 0
if(count == 1) {
return xSemaphoreCreateBinaryStatic( semaphore_def->controlblock );
}
else
{
#if (configUSE_COUNTING_SEMAPHORES == 1 )
return xSemaphoreCreateCountingStatic( count, count, semaphore_def->controlblock );
#else
return NULL;
#endif
}
#else // configSUPPORT_STATIC_ALLOCATION == 0 && configSUPPORT_DYNAMIC_ALLOCATION == 1
osSemaphoreId sema;
if (count == 1) {
vSemaphoreCreateBinary(sema);
return sema;
}
else {
#if (configUSE_COUNTING_SEMAPHORES == 1 )
return xSemaphoreCreateCounting(count, count);
#else
return NULL;
#endif
}
#endif
}
/**
* @brief Wait until a Semaphore token becomes available
* @param semaphore_id semaphore object referenced with \ref osSemaphore.
* @param millisec timeout value or 0 in case of no time-out.
* @retval number of available tokens, or -1 in case of incorrect parameters.
* @note MUST REMAIN UNCHANGED: \b osSemaphoreWait shall be consistent in every CMSIS-RTOS.
*/
int32_t osSemaphoreWait (osSemaphoreId semaphore_id, uint32_t millisec)
{
TickType_t ticks;
portBASE_TYPE taskWoken = pdFALSE;
if (semaphore_id == NULL) {
return osErrorParameter;
}
ticks = 0;
if (millisec == osWaitForever) {
ticks = portMAX_DELAY;
}
else if (millisec != 0) {
ticks = millisec / portTICK_PERIOD_MS;
if (ticks == 0) {
ticks = 1;
}
}
if (inHandlerMode()) {
if (xSemaphoreTakeFromISR(semaphore_id, &taskWoken) != pdTRUE) {
return osErrorOS;
}
portEND_SWITCHING_ISR(taskWoken);
}
else if (xSemaphoreTake(semaphore_id, ticks) != pdTRUE) {
return osErrorOS;
}
return osOK;
}
/**
* @brief Release a Semaphore token
* @param semaphore_id semaphore object referenced with \ref osSemaphore.
* @retval status code that indicates the execution status of the function.
* @note MUST REMAIN UNCHANGED: \b osSemaphoreRelease shall be consistent in every CMSIS-RTOS.
*/
osStatus osSemaphoreRelease (osSemaphoreId semaphore_id)
{
osStatus result = osOK;
portBASE_TYPE taskWoken = pdFALSE;
if (inHandlerMode()) {
if (xSemaphoreGiveFromISR(semaphore_id, &taskWoken) != pdTRUE) {
return osErrorOS;
}
portEND_SWITCHING_ISR(taskWoken);
}
else {
if (xSemaphoreGive(semaphore_id) != pdTRUE) {
result = osErrorOS;
}
}
return result;
}
/**
* @brief Delete a Semaphore
* @param semaphore_id semaphore object referenced with \ref osSemaphore.
* @retval status code that indicates the execution status of the function.
* @note MUST REMAIN UNCHANGED: \b osSemaphoreDelete shall be consistent in every CMSIS-RTOS.
*/
osStatus osSemaphoreDelete (osSemaphoreId semaphore_id)
{
if (inHandlerMode()) {
return osErrorISR;
}
vSemaphoreDelete(semaphore_id);
return osOK;
}
#endif /* Use Semaphores */
/******************* Memory Pool Management Functions ***********************/
#if (defined (osFeature_Pool) && (osFeature_Pool != 0))
//TODO
//This is a primitive and inefficient wrapper around the existing FreeRTOS memory management.
//A better implementation will have to modify heap_x.c!
typedef struct os_pool_cb {
void *pool;
uint8_t *markers;
uint32_t pool_sz;
uint32_t item_sz;
uint32_t currentIndex;
} os_pool_cb_t;
/**
* @brief Create and Initialize a memory pool
* @param pool_def memory pool definition referenced with \ref osPool.
* @retval memory pool ID for reference by other functions or NULL in case of error.
* @note MUST REMAIN UNCHANGED: \b osPoolCreate shall be consistent in every CMSIS-RTOS.
*/
osPoolId osPoolCreate (const osPoolDef_t *pool_def)
{
#if (configSUPPORT_DYNAMIC_ALLOCATION == 1)
osPoolId thePool;
int itemSize = 4 * ((pool_def->item_sz + 3) / 4);
uint32_t i;
/* First have to allocate memory for the pool control block. */
thePool = pvPortMalloc(sizeof(os_pool_cb_t));
if (thePool) {
thePool->pool_sz = pool_def->pool_sz;
thePool->item_sz = itemSize;
thePool->currentIndex = 0;
/* Memory for markers */
thePool->markers = pvPortMalloc(pool_def->pool_sz);
if (thePool->markers) {
/* Now allocate the pool itself. */
thePool->pool = pvPortMalloc(pool_def->pool_sz * itemSize);
if (thePool->pool) {
for (i = 0; i < pool_def->pool_sz; i++) {
thePool->markers[i] = 0;
}
}
else {
vPortFree(thePool->markers);
vPortFree(thePool);
thePool = NULL;
}
}
else {
vPortFree(thePool);
thePool = NULL;
}
}
return thePool;
#else
return NULL;
#endif
}
/**
* @brief Allocate a memory block from a memory pool
* @param pool_id memory pool ID obtain referenced with \ref osPoolCreate.
* @retval address of the allocated memory block or NULL in case of no memory available.
* @note MUST REMAIN UNCHANGED: \b osPoolAlloc shall be consistent in every CMSIS-RTOS.
*/
void *osPoolAlloc (osPoolId pool_id)
{
int dummy = 0;
void *p = NULL;
uint32_t i;
uint32_t index;
if (inHandlerMode()) {
dummy = portSET_INTERRUPT_MASK_FROM_ISR();
}
else {
vPortEnterCritical();
}
for (i = 0; i < pool_id->pool_sz; i++) {
index = pool_id->currentIndex + i;
if (index >= pool_id->pool_sz) {
index = 0;
}
if (pool_id->markers[index] == 0) {
pool_id->markers[index] = 1;
p = (void *)((uint32_t)(pool_id->pool) + (index * pool_id->item_sz));
pool_id->currentIndex = index;
break;
}
}
if (inHandlerMode()) {
portCLEAR_INTERRUPT_MASK_FROM_ISR(dummy);
}
else {
vPortExitCritical();
}
return p;
}
/**
* @brief Allocate a memory block from a memory pool and set memory block to zero
* @param pool_id memory pool ID obtain referenced with \ref osPoolCreate.
* @retval address of the allocated memory block or NULL in case of no memory available.
* @note MUST REMAIN UNCHANGED: \b osPoolCAlloc shall be consistent in every CMSIS-RTOS.
*/
void *osPoolCAlloc (osPoolId pool_id)
{
void *p = osPoolAlloc(pool_id);
if (p != NULL)
{
memset(p, 0, sizeof(pool_id->pool_sz));
}
return p;
}
/**
* @brief Return an allocated memory block back to a specific memory pool
* @param pool_id memory pool ID obtain referenced with \ref osPoolCreate.
* @param block address of the allocated memory block that is returned to the memory pool.
* @retval status code that indicates the execution status of the function.
* @note MUST REMAIN UNCHANGED: \b osPoolFree shall be consistent in every CMSIS-RTOS.
*/
osStatus osPoolFree (osPoolId pool_id, void *block)
{
uint32_t index;
if (pool_id == NULL) {
return osErrorParameter;
}
if (block == NULL) {
return osErrorParameter;
}
if (block < pool_id->pool) {
return osErrorParameter;
}
index = (uint32_t)block - (uint32_t)(pool_id->pool);
if (index % pool_id->item_sz) {
return osErrorParameter;
}
index = index / pool_id->item_sz;
if (index >= pool_id->pool_sz) {
return osErrorParameter;
}
pool_id->markers[index] = 0;
return osOK;
}
#endif /* Use Memory Pool Management */
/******************* Message Queue Management Functions *********************/
#if (defined (osFeature_MessageQ) && (osFeature_MessageQ != 0)) /* Use Message Queues */
/**
* @brief Create and Initialize a Message Queue
* @param queue_def queue definition referenced with \ref osMessageQ.
* @param thread_id thread ID (obtained by \ref osThreadCreate or \ref osThreadGetId) or NULL.
* @retval message queue ID for reference by other functions or NULL in case of error.
* @note MUST REMAIN UNCHANGED: \b osMessageCreate shall be consistent in every CMSIS-RTOS.
*/
osMessageQId osMessageCreate (const osMessageQDef_t *queue_def, osThreadId thread_id)
{
(void) thread_id;
#if( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
if ((queue_def->buffer != NULL) && (queue_def->controlblock != NULL)) {
return xQueueCreateStatic(queue_def->queue_sz, queue_def->item_sz, queue_def->buffer, queue_def->controlblock);
}
else {
return xQueueCreate(queue_def->queue_sz, queue_def->item_sz);
}
#elif ( configSUPPORT_STATIC_ALLOCATION == 1 )
return xQueueCreateStatic(queue_def->queue_sz, queue_def->item_sz, queue_def->buffer, queue_def->controlblock);
#else
return xQueueCreate(queue_def->queue_sz, queue_def->item_sz);
#endif
}
/**
* @brief Put a Message to a Queue.
* @param queue_id message queue ID obtained with \ref osMessageCreate.
* @param info message information.
* @param millisec timeout value or 0 in case of no time-out.
* @retval status code that indicates the execution status of the function.
* @note MUST REMAIN UNCHANGED: \b osMessagePut shall be consistent in every CMSIS-RTOS.
*/
osStatus osMessagePut (osMessageQId queue_id, uint32_t info, uint32_t millisec)
{
portBASE_TYPE taskWoken = pdFALSE;
TickType_t ticks;
ticks = millisec / portTICK_PERIOD_MS;
if (ticks == 0) {
ticks = 1;
}
if (inHandlerMode()) {
if (xQueueSendFromISR(queue_id, &info, &taskWoken) != pdTRUE) {
return osErrorOS;
}
portEND_SWITCHING_ISR(taskWoken);
}
else {
if (xQueueSend(queue_id, &info, ticks) != pdTRUE) {
return osErrorOS;
}
}
return osOK;
}
/**
* @brief Get a Message or Wait for a Message from a Queue.
* @param queue_id message queue ID obtained with \ref osMessageCreate.
* @param millisec timeout value or 0 in case of no time-out.
* @retval event information that includes status code.
* @note MUST REMAIN UNCHANGED: \b osMessageGet shall be consistent in every CMSIS-RTOS.
*/
osEvent osMessageGet (osMessageQId queue_id, uint32_t millisec)
{
portBASE_TYPE taskWoken;
TickType_t ticks;
osEvent event;
event.def.message_id = queue_id;
event.value.v = 0;
if (queue_id == NULL) {
event.status = osErrorParameter;
return event;
}
taskWoken = pdFALSE;
ticks = 0;
if (millisec == osWaitForever) {
ticks = portMAX_DELAY;
}
else if (millisec != 0) {
ticks = millisec / portTICK_PERIOD_MS;
if (ticks == 0) {
ticks = 1;
}
}
if (inHandlerMode()) {
if (xQueueReceiveFromISR(queue_id, &event.value.v, &taskWoken) == pdTRUE) {
/* We have mail */
event.status = osEventMessage;
}
else {
event.status = osOK;
}
portEND_SWITCHING_ISR(taskWoken);
}
else {
if (xQueueReceive(queue_id, &event.value.v, ticks) == pdTRUE) {
/* We have mail */
event.status = osEventMessage;
}
else {
event.status = (ticks == 0) ? osOK : osEventTimeout;
}
}
return event;
}
#endif /* Use Message Queues */
/******************** Mail Queue Management Functions ***********************/
#if (defined (osFeature_MailQ) && (osFeature_MailQ != 0)) /* Use Mail Queues */
typedef struct os_mailQ_cb {
const osMailQDef_t *queue_def;
QueueHandle_t handle;
osPoolId pool;
} os_mailQ_cb_t;
/**
* @brief Create and Initialize mail queue
* @param queue_def reference to the mail queue definition obtain with \ref osMailQ
* @param thread_id thread ID (obtained by \ref osThreadCreate or \ref osThreadGetId) or NULL.
* @retval mail queue ID for reference by other functions or NULL in case of error.
* @note MUST REMAIN UNCHANGED: \b osMailCreate shall be consistent in every CMSIS-RTOS.
*/
osMailQId osMailCreate (const osMailQDef_t *queue_def, osThreadId thread_id)
{
#if (configSUPPORT_DYNAMIC_ALLOCATION == 1)
(void) thread_id;
osPoolDef_t pool_def = {queue_def->queue_sz, queue_def->item_sz, NULL};
/* Create a mail queue control block */
*(queue_def->cb) = pvPortMalloc(sizeof(struct os_mailQ_cb));
if (*(queue_def->cb) == NULL) {
return NULL;
}
(*(queue_def->cb))->queue_def = queue_def;
/* Create a queue in FreeRTOS */
(*(queue_def->cb))->handle = xQueueCreate(queue_def->queue_sz, sizeof(void *));
if ((*(queue_def->cb))->handle == NULL) {
vPortFree(*(queue_def->cb));
return NULL;
}
/* Create a mail pool */
(*(queue_def->cb))->pool = osPoolCreate(&pool_def);
if ((*(queue_def->cb))->pool == NULL) {
//TODO: Delete queue. How to do it in FreeRTOS?
vPortFree(*(queue_def->cb));
return NULL;
}
return *(queue_def->cb);
#else
return NULL;
#endif
}
/**
* @brief Allocate a memory block from a mail
* @param queue_id mail queue ID obtained with \ref osMailCreate.
* @param millisec timeout value or 0 in case of no time-out.
* @retval pointer to memory block that can be filled with mail or NULL in case error.
* @note MUST REMAIN UNCHANGED: \b osMailAlloc shall be consistent in every CMSIS-RTOS.
*/
void *osMailAlloc (osMailQId queue_id, uint32_t millisec)
{
(void) millisec;
void *p;
if (queue_id == NULL) {
return NULL;
}
p = osPoolAlloc(queue_id->pool);
return p;
}
/**
* @brief Allocate a memory block from a mail and set memory block to zero
* @param queue_id mail queue ID obtained with \ref osMailCreate.
* @param millisec timeout value or 0 in case of no time-out.
* @retval pointer to memory block that can be filled with mail or NULL in case error.
* @note MUST REMAIN UNCHANGED: \b osMailCAlloc shall be consistent in every CMSIS-RTOS.
*/
void *osMailCAlloc (osMailQId queue_id, uint32_t millisec)
{
uint32_t i;
void *p = osMailAlloc(queue_id, millisec);
if (p) {
for (i = 0; i < queue_id->queue_def->item_sz; i++) {
((uint8_t *)p)[i] = 0;
}
}
return p;
}
/**
* @brief Put a mail to a queue
* @param queue_id mail queue ID obtained with \ref osMailCreate.
* @param mail memory block previously allocated with \ref osMailAlloc or \ref osMailCAlloc.
* @retval status code that indicates the execution status of the function.
* @note MUST REMAIN UNCHANGED: \b osMailPut shall be consistent in every CMSIS-RTOS.
*/
osStatus osMailPut (osMailQId queue_id, void *mail)
{
portBASE_TYPE taskWoken;
if (queue_id == NULL) {
return osErrorParameter;
}
taskWoken = pdFALSE;
if (inHandlerMode()) {
if (xQueueSendFromISR(queue_id->handle, &mail, &taskWoken) != pdTRUE) {
return osErrorOS;
}
portEND_SWITCHING_ISR(taskWoken);
}
else {
if (xQueueSend(queue_id->handle, &mail, 0) != pdTRUE) {
return osErrorOS;
}
}
return osOK;
}
/**
* @brief Get a mail from a queue
* @param queue_id mail queue ID obtained with \ref osMailCreate.
* @param millisec timeout value or 0 in case of no time-out
* @retval event that contains mail information or error code.
* @note MUST REMAIN UNCHANGED: \b osMailGet shall be consistent in every CMSIS-RTOS.
*/
osEvent osMailGet (osMailQId queue_id, uint32_t millisec)
{
portBASE_TYPE taskWoken;
TickType_t ticks;
osEvent event;
event.def.mail_id = queue_id;
if (queue_id == NULL) {
event.status = osErrorParameter;
return event;
}
taskWoken = pdFALSE;
ticks = 0;
if (millisec == osWaitForever) {
ticks = portMAX_DELAY;
}
else if (millisec != 0) {
ticks = millisec / portTICK_PERIOD_MS;
if (ticks == 0) {
ticks = 1;
}
}
if (inHandlerMode()) {
if (xQueueReceiveFromISR(queue_id->handle, &event.value.p, &taskWoken) == pdTRUE) {
/* We have mail */
event.status = osEventMail;
}
else {
event.status = osOK;
}
portEND_SWITCHING_ISR(taskWoken);
}
else {
if (xQueueReceive(queue_id->handle, &event.value.p, ticks) == pdTRUE) {
/* We have mail */
event.status = osEventMail;
}
else {
event.status = (ticks == 0) ? osOK : osEventTimeout;
}
}
return event;
}
/**
* @brief Free a memory block from a mail
* @param queue_id mail queue ID obtained with \ref osMailCreate.
* @param mail pointer to the memory block that was obtained with \ref osMailGet.
* @retval status code that indicates the execution status of the function.
* @note MUST REMAIN UNCHANGED: \b osMailFree shall be consistent in every CMSIS-RTOS.
*/
osStatus osMailFree (osMailQId queue_id, void *mail)
{
if (queue_id == NULL) {
return osErrorParameter;
}
return osPoolFree(queue_id->pool, mail);
}
#endif /* Use Mail Queues */
/*************************** Additional specific APIs to Free RTOS ************/
/**
* @brief Handles the tick increment
* @param none.
* @retval none.
*/
void osSystickHandler(void)
{
#if (INCLUDE_xTaskGetSchedulerState == 1 )
if (xTaskGetSchedulerState() != taskSCHEDULER_NOT_STARTED)
{
#endif /* INCLUDE_xTaskGetSchedulerState */
xPortSysTickHandler();
#if (INCLUDE_xTaskGetSchedulerState == 1 )
}
#endif /* INCLUDE_xTaskGetSchedulerState */
}
#if ( INCLUDE_eTaskGetState == 1 )
/**
* @brief Obtain the state of any thread.
* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId.
* @retval the stae of the thread, states are encoded by the osThreadState enumerated type.
*/
osThreadState osThreadGetState(osThreadId thread_id)
{
eTaskState ThreadState;
osThreadState result;
ThreadState = eTaskGetState(thread_id);
switch (ThreadState)
{
case eRunning :
result = osThreadRunning;
break;
case eReady :
result = osThreadReady;
break;
case eBlocked :
result = osThreadBlocked;
break;
case eSuspended :
result = osThreadSuspended;
break;
case eDeleted :
result = osThreadDeleted;
break;
default:
result = osThreadError;
}
return result;
}
#endif /* INCLUDE_eTaskGetState */
#if (INCLUDE_eTaskGetState == 1)
/**
* @brief Check if a thread is already suspended or not.
* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId.
* @retval status code that indicates the execution status of the function.
*/
osStatus osThreadIsSuspended(osThreadId thread_id)
{
if (eTaskGetState(thread_id) == eSuspended)
return osOK;
else
return osErrorOS;
}
#endif /* INCLUDE_eTaskGetState */
/**
* @brief Suspend execution of a thread.
* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId.
* @retval status code that indicates the execution status of the function.
*/
osStatus osThreadSuspend (osThreadId thread_id)
{
#if (INCLUDE_vTaskSuspend == 1)
vTaskSuspend(thread_id);
return osOK;
#else
return osErrorResource;
#endif
}
/**
* @brief Resume execution of a suspended thread.
* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId.
* @retval status code that indicates the execution status of the function.
*/
osStatus osThreadResume (osThreadId thread_id)
{
#if (INCLUDE_vTaskSuspend == 1)
if(inHandlerMode())
{
if (xTaskResumeFromISR(thread_id) == pdTRUE)
{
portYIELD_FROM_ISR(pdTRUE);
}
}
else
{
vTaskResume(thread_id);
}
return osOK;
#else
return osErrorResource;
#endif
}
/**
* @brief Suspend execution of a all active threads.
* @retval status code that indicates the execution status of the function.
*/
osStatus osThreadSuspendAll (void)
{
vTaskSuspendAll();
return osOK;
}
/**
* @brief Resume execution of a all suspended threads.
* @retval status code that indicates the execution status of the function.
*/
osStatus osThreadResumeAll (void)
{
if (xTaskResumeAll() == pdTRUE)
return osOK;
else
return osErrorOS;
}
/**
* @brief Delay a task until a specified time
* @param PreviousWakeTime Pointer to a variable that holds the time at which the
* task was last unblocked. PreviousWakeTime must be initialised with the current time
* prior to its first use (PreviousWakeTime = osKernelSysTick() )
* @param millisec time delay value
* @retval status code that indicates the execution status of the function.
*/
osStatus osDelayUntil (uint32_t *PreviousWakeTime, uint32_t millisec)
{
#if INCLUDE_vTaskDelayUntil
TickType_t ticks = (millisec / portTICK_PERIOD_MS);
vTaskDelayUntil((TickType_t *) PreviousWakeTime, ticks ? ticks : 1);
return osOK;
#else
(void) millisec;
(void) PreviousWakeTime;
return osErrorResource;
#endif
}
/**
* @brief Abort the delay for a specific thread
* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId
* @retval status code that indicates the execution status of the function.
*/
osStatus osAbortDelay(osThreadId thread_id)
{
#if INCLUDE_xTaskAbortDelay
xTaskAbortDelay(thread_id);
return osOK;
#else
(void) thread_id;
return osErrorResource;
#endif
}
/**
* @brief Lists all the current threads, along with their current state
* and stack usage high water mark.
* @param buffer A buffer into which the above mentioned details
* will be written
* @retval status code that indicates the execution status of the function.
*/
osStatus osThreadList (uint8_t *buffer)
{
#if ( ( configUSE_TRACE_FACILITY == 1 ) && ( configUSE_STATS_FORMATTING_FUNCTIONS == 1 ) )
vTaskList((char *)buffer);
#endif
return osOK;
}
/**
* @brief Receive an item from a queue without removing the item from the queue.
* @param queue_id message queue ID obtained with \ref osMessageCreate.
* @param millisec timeout value or 0 in case of no time-out.
* @retval event information that includes status code.
*/
osEvent osMessagePeek (osMessageQId queue_id, uint32_t millisec)
{
TickType_t ticks;
osEvent event;
event.def.message_id = queue_id;
if (queue_id == NULL) {
event.status = osErrorParameter;
return event;
}
ticks = 0;
if (millisec == osWaitForever) {
ticks = portMAX_DELAY;
}
else if (millisec != 0) {
ticks = millisec / portTICK_PERIOD_MS;
if (ticks == 0) {
ticks = 1;
}
}
if (xQueuePeek(queue_id, &event.value.v, ticks) == pdTRUE)
{
/* We have mail */
event.status = osEventMessage;
}
else
{
event.status = (ticks == 0) ? osOK : osEventTimeout;
}
return event;
}
/**
* @brief Get the number of messaged stored in a queue.
* @param queue_id message queue ID obtained with \ref osMessageCreate.
* @retval number of messages stored in a queue.
*/
uint32_t osMessageWaiting(osMessageQId queue_id)
{
if (inHandlerMode()) {
return uxQueueMessagesWaitingFromISR(queue_id);
}
else
{
return uxQueueMessagesWaiting(queue_id);
}
}
/**
* @brief Get the available space in a message queue.
* @param queue_id message queue ID obtained with \ref osMessageCreate.
* @retval available space in a message queue.
*/
uint32_t osMessageAvailableSpace(osMessageQId queue_id)
{
return uxQueueSpacesAvailable(queue_id);
}
/**
* @brief Delete a Message Queue
* @param queue_id message queue ID obtained with \ref osMessageCreate.
* @retval status code that indicates the execution status of the function.
*/
osStatus osMessageDelete (osMessageQId queue_id)
{
if (inHandlerMode()) {
return osErrorISR;
}
vQueueDelete(queue_id);
return osOK;
}
/**
* @brief Create and Initialize a Recursive Mutex
* @param mutex_def mutex definition referenced with \ref osMutex.
* @retval mutex ID for reference by other functions or NULL in case of error..
*/
osMutexId osRecursiveMutexCreate (const osMutexDef_t *mutex_def)
{
#if (configUSE_RECURSIVE_MUTEXES == 1)
#if( configSUPPORT_STATIC_ALLOCATION == 1 ) && ( configSUPPORT_DYNAMIC_ALLOCATION == 1 )
if (mutex_def->controlblock != NULL){
return xSemaphoreCreateRecursiveMutexStatic( mutex_def->controlblock );
}
else {
return xSemaphoreCreateRecursiveMutex();
}
#elif ( configSUPPORT_STATIC_ALLOCATION == 1 )
return xSemaphoreCreateRecursiveMutexStatic( mutex_def->controlblock );
#else
return xSemaphoreCreateRecursiveMutex();
#endif
#else
return NULL;
#endif
}
/**
* @brief Release a Recursive Mutex
* @param mutex_id mutex ID obtained by \ref osRecursiveMutexCreate.
* @retval status code that indicates the execution status of the function.
*/
osStatus osRecursiveMutexRelease (osMutexId mutex_id)
{
#if (configUSE_RECURSIVE_MUTEXES == 1)
osStatus result = osOK;
if (xSemaphoreGiveRecursive(mutex_id) != pdTRUE)
{
result = osErrorOS;
}
return result;
#else
return osErrorResource;
#endif
}
/**
* @brief Release a Recursive Mutex
* @param mutex_id mutex ID obtained by \ref osRecursiveMutexCreate.
* @param millisec timeout value or 0 in case of no time-out.
* @retval status code that indicates the execution status of the function.
*/
osStatus osRecursiveMutexWait (osMutexId mutex_id, uint32_t millisec)
{
#if (configUSE_RECURSIVE_MUTEXES == 1)
TickType_t ticks;
if (mutex_id == NULL)
{
return osErrorParameter;
}
ticks = 0;
if (millisec == osWaitForever)
{
ticks = portMAX_DELAY;
}
else if (millisec != 0)
{
ticks = millisec / portTICK_PERIOD_MS;
if (ticks == 0)
{
ticks = 1;
}
}
if (xSemaphoreTakeRecursive(mutex_id, ticks) != pdTRUE)
{
return osErrorOS;
}
return osOK;
#else
return osErrorResource;
#endif
}
/**
* @brief Returns the current count value of a counting semaphore
* @param semaphore_id semaphore_id ID obtained by \ref osSemaphoreCreate.
* @retval count value
*/
uint32_t osSemaphoreGetCount(osSemaphoreId semaphore_id)
{
return uxSemaphoreGetCount(semaphore_id);
}
// cmsis_os.h
/* ----------------------------------------------------------------------
* $Date: 5. February 2013
* $Revision: V1.02
*
* Project: CMSIS-RTOS API
* Title: cmsis_os.h header file
*
* Version 0.02
* Initial Proposal Phase
* Version 0.03
* osKernelStart added, optional feature: main started as thread
* osSemaphores have standard behavior
* osTimerCreate does not start the timer, added osTimerStart
* osThreadPass is renamed to osThreadYield
* Version 1.01
* Support for C++ interface
* - const attribute removed from the osXxxxDef_t typedef's
* - const attribute added to the osXxxxDef macros
* Added: osTimerDelete, osMutexDelete, osSemaphoreDelete
* Added: osKernelInitialize
* Version 1.02
* Control functions for short timeouts in microsecond resolution:
* Added: osKernelSysTick, osKernelSysTickFrequency, osKernelSysTickMicroSec
* Removed: osSignalGet
*
*
*----------------------------------------------------------------------------
*
* Portions Copyright ?2016 STMicroelectronics International N.V. All rights reserved.
* Portions Copyright (c) 2013 ARM LIMITED
* All rights reserved.
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* - Neither the name of ARM nor the names of its contributors may be used
* to endorse or promote products derived from this software without
* specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL COPYRIGHT HOLDERS AND CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*---------------------------------------------------------------------------*/
/**
******************************************************************************
* @file cmsis_os.h
* @author MCD Application Team
* @date 03-March-2017
* @brief Header of cmsis_os.c
* A new set of APIs are added in addition to existing ones, these APIs
* are specific to FreeRTOS.
******************************************************************************
* @attention
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted, provided that the following conditions are met:
*
* 1. Redistribution of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of other
* contributors to this software may be used to endorse or promote products
* derived from this software without specific written permission.
* 4. This software, including modifications and/or derivative works of this
* software, must execute solely and exclusively on microcontroller or
* microprocessor devices manufactured by or for STMicroelectronics.
* 5. Redistribution and use of this software other than as permitted under
* this license is void and will automatically terminate your rights under
* this license.
*
* THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
* PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
* RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
* SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
#include "FreeRTOS.h"
#include "task.h"
#include "timers.h"
#include "queue.h"
#include "semphr.h"
#include "event_groups.h"
/**
\page cmsis_os_h Header File Template: cmsis_os.h
The file \b cmsis_os.h is a template header file for a CMSIS-RTOS compliant Real-Time Operating System (RTOS).
Each RTOS that is compliant with CMSIS-RTOS shall provide a specific \b cmsis_os.h header file that represents
its implementation.
The file cmsis_os.h contains:
- CMSIS-RTOS API function definitions
- struct definitions for parameters and return types
- status and priority values used by CMSIS-RTOS API functions
- macros for defining threads and other kernel objects
<b>Name conventions and header file modifications</b>
All definitions are prefixed with \b os to give an unique name space for CMSIS-RTOS functions.
Definitions that are prefixed \b os_ are not used in the application code but local to this header file.
All definitions and functions that belong to a module are grouped and have a common prefix, i.e. \b osThread.
Definitions that are marked with <b>CAN BE CHANGED</b> can be adapted towards the needs of the actual CMSIS-RTOS implementation.
These definitions can be specific to the underlying RTOS kernel.
Definitions that are marked with <b>MUST REMAIN UNCHANGED</b> cannot be altered. Otherwise the CMSIS-RTOS implementation is no longer
compliant to the standard. Note that some functions are optional and need not to be provided by every CMSIS-RTOS implementation.
<b>Function calls from interrupt service routines</b>
The following CMSIS-RTOS functions can be called from threads and interrupt service routines (ISR):
- \ref osSignalSet
- \ref osSemaphoreRelease
- \ref osPoolAlloc, \ref osPoolCAlloc, \ref osPoolFree
- \ref osMessagePut, \ref osMessageGet
- \ref osMailAlloc, \ref osMailCAlloc, \ref osMailGet, \ref osMailPut, \ref osMailFree
Functions that cannot be called from an ISR are verifying the interrupt status and return in case that they are called
from an ISR context the status code \b osErrorISR. In some implementations this condition might be caught using the HARD FAULT vector.
Some CMSIS-RTOS implementations support CMSIS-RTOS function calls from multiple ISR at the same time.
If this is impossible, the CMSIS-RTOS rejects calls by nested ISR functions with the status code \b osErrorISRRecursive.
<b>Define and reference object definitions</b>
With <b>\#define osObjectsExternal</b> objects are defined as external symbols. This allows to create a consistent header file
that is used throughout a project as shown below:
<i>Header File</i>
\code
#include <cmsis_os.h> // CMSIS RTOS header file
// Thread definition
extern void thread_sample (void const *argument); // function prototype
osThreadDef (thread_sample, osPriorityBelowNormal, 1, 100);
// Pool definition
osPoolDef(MyPool, 10, long);
\endcode
This header file defines all objects when included in a C/C++ source file. When <b>\#define osObjectsExternal</b> is
present before the header file, the objects are defined as external symbols. A single consistent header file can therefore be
used throughout the whole project.
<i>Example</i>
\code
#include "osObjects.h" // Definition of the CMSIS-RTOS objects
\endcode
\code
#define osObjectExternal // Objects will be defined as external symbols
#include "osObjects.h" // Reference to the CMSIS-RTOS objects
\endcode
*/
#ifndef _CMSIS_OS_H
#define _CMSIS_OS_H
/// \note MUST REMAIN UNCHANGED: \b osCMSIS identifies the CMSIS-RTOS API version.
#define osCMSIS 0x10002 ///< API version (main [31:16] .sub [15:0])
/// \note CAN BE CHANGED: \b osCMSIS_KERNEL identifies the underlying RTOS kernel and version number.
#define osCMSIS_KERNEL 0x10000 ///< RTOS identification and version (main [31:16] .sub [15:0])
/// \note MUST REMAIN UNCHANGED: \b osKernelSystemId shall be consistent in every CMSIS-RTOS.
#define osKernelSystemId "KERNEL V1.00" ///< RTOS identification string
/// \note MUST REMAIN UNCHANGED: \b osFeature_xxx shall be consistent in every CMSIS-RTOS.
#define osFeature_MainThread 1 ///< main thread 1=main can be thread, 0=not available
#define osFeature_Pool 1 ///< Memory Pools: 1=available, 0=not available
#define osFeature_MailQ 1 ///< Mail Queues: 1=available, 0=not available
#define osFeature_MessageQ 1 ///< Message Queues: 1=available, 0=not available
#define osFeature_Signals 8 ///< maximum number of Signal Flags available per thread
#define osFeature_Semaphore 1 ///< osFeature_Semaphore function: 1=available, 0=not available
#define osFeature_Wait 0 ///< osWait function: 1=available, 0=not available
#define osFeature_SysTick 1 ///< osKernelSysTick functions: 1=available, 0=not available
#ifdef __cplusplus
extern "C"
{
#endif
// ==== Enumeration, structures, defines ====
/// Priority used for thread control.
/// \note MUST REMAIN UNCHANGED: \b osPriority shall be consistent in every CMSIS-RTOS.
typedef enum {
osPriorityIdle = -3, ///< priority: idle (lowest)
osPriorityLow = -2, ///< priority: low
osPriorityBelowNormal = -1, ///< priority: below normal
osPriorityNormal = 0, ///< priority: normal (default)
osPriorityAboveNormal = +1, ///< priority: above normal
osPriorityHigh = +2, ///< priority: high
osPriorityRealtime = +3, ///< priority: realtime (highest)
osPriorityError = 0x84 ///< system cannot determine priority or thread has illegal priority
} osPriority;
/// Timeout value.
/// \note MUST REMAIN UNCHANGED: \b osWaitForever shall be consistent in every CMSIS-RTOS.
#define osWaitForever 0xFFFFFFFF ///< wait forever timeout value
/// Status code values returned by CMSIS-RTOS functions.
/// \note MUST REMAIN UNCHANGED: \b osStatus shall be consistent in every CMSIS-RTOS.
typedef enum {
osOK = 0, ///< function completed; no error or event occurred.
osEventSignal = 0x08, ///< function completed; signal event occurred.
osEventMessage = 0x10, ///< function completed; message event occurred.
osEventMail = 0x20, ///< function completed; mail event occurred.
osEventTimeout = 0x40, ///< function completed; timeout occurred.
osErrorParameter = 0x80, ///< parameter error: a mandatory parameter was missing or specified an incorrect object.
osErrorResource = 0x81, ///< resource not available: a specified resource was not available.
osErrorTimeoutResource = 0xC1, ///< resource not available within given time: a specified resource was not available within the timeout period.
osErrorISR = 0x82, ///< not allowed in ISR context: the function cannot be called from interrupt service routines.
osErrorISRRecursive = 0x83, ///< function called multiple times from ISR with same object.
osErrorPriority = 0x84, ///< system cannot determine priority or thread has illegal priority.
osErrorNoMemory = 0x85, ///< system is out of memory: it was impossible to allocate or reserve memory for the operation.
osErrorValue = 0x86, ///< value of a parameter is out of range.
osErrorOS = 0xFF, ///< unspecified RTOS error: run-time error but no other error message fits.
os_status_reserved = 0x7FFFFFFF ///< prevent from enum down-size compiler optimization.
} osStatus;
#if ( INCLUDE_eTaskGetState == 1 )
/* Thread state returned by osThreadGetState */
typedef enum {
osThreadRunning = 0x0, /* A thread is querying the state of itself, so must be running. */
osThreadReady = 0x1 , /* The thread being queried is in a read or pending ready list. */
osThreadBlocked = 0x2, /* The thread being queried is in the Blocked state. */
osThreadSuspended = 0x3, /* The thread being queried is in the Suspended state, or is in the Blocked state with an infinite time out. */
osThreadDeleted = 0x4, /* The thread being queried has been deleted, but its TCB has not yet been freed. */
osThreadError = 0x7FFFFFFF
} osThreadState;
#endif /* INCLUDE_eTaskGetState */
/// Timer type value for the timer definition.
/// \note MUST REMAIN UNCHANGED: \b os_timer_type shall be consistent in every CMSIS-RTOS.
typedef enum {
osTimerOnce = 0, ///< one-shot timer
osTimerPeriodic = 1 ///< repeating timer
} os_timer_type;
/// Entry point of a thread.
/// \note MUST REMAIN UNCHANGED: \b os_pthread shall be consistent in every CMSIS-RTOS.
typedef void (*os_pthread) (void const *argument);
/// Entry point of a timer call back function.
/// \note MUST REMAIN UNCHANGED: \b os_ptimer shall be consistent in every CMSIS-RTOS.
typedef void (*os_ptimer) (void const *argument);
// >>> the following data type definitions may shall adapted towards a specific RTOS
/// Thread ID identifies the thread (pointer to a thread control block).
/// \note CAN BE CHANGED: \b os_thread_cb is implementation specific in every CMSIS-RTOS.
typedef TaskHandle_t osThreadId;
/// Timer ID identifies the timer (pointer to a timer control block).
/// \note CAN BE CHANGED: \b os_timer_cb is implementation specific in every CMSIS-RTOS.
typedef TimerHandle_t osTimerId;
/// Mutex ID identifies the mutex (pointer to a mutex control block).
/// \note CAN BE CHANGED: \b os_mutex_cb is implementation specific in every CMSIS-RTOS.
typedef SemaphoreHandle_t osMutexId;
/// Semaphore ID identifies the semaphore (pointer to a semaphore control block).
/// \note CAN BE CHANGED: \b os_semaphore_cb is implementation specific in every CMSIS-RTOS.
typedef SemaphoreHandle_t osSemaphoreId;
/// Pool ID identifies the memory pool (pointer to a memory pool control block).
/// \note CAN BE CHANGED: \b os_pool_cb is implementation specific in every CMSIS-RTOS.
typedef struct os_pool_cb *osPoolId;
/// Message ID identifies the message queue (pointer to a message queue control block).
/// \note CAN BE CHANGED: \b os_messageQ_cb is implementation specific in every CMSIS-RTOS.
typedef QueueHandle_t osMessageQId;
/// Mail ID identifies the mail queue (pointer to a mail queue control block).
/// \note CAN BE CHANGED: \b os_mailQ_cb is implementation specific in every CMSIS-RTOS.
typedef struct os_mailQ_cb *osMailQId;
#if( configSUPPORT_STATIC_ALLOCATION == 1 )
typedef StaticTask_t osStaticThreadDef_t;
typedef StaticTimer_t osStaticTimerDef_t;
typedef StaticSemaphore_t osStaticMutexDef_t;
typedef StaticSemaphore_t osStaticSemaphoreDef_t;
typedef StaticQueue_t osStaticMessageQDef_t;
#endif
/// Thread Definition structure contains startup information of a thread.
/// \note CAN BE CHANGED: \b os_thread_def is implementation specific in every CMSIS-RTOS.
typedef struct os_thread_def {
char *name; ///< Thread name
os_pthread pthread; ///< start address of thread function
osPriority tpriority; ///< initial thread priority
uint32_t instances; ///< maximum number of instances of that thread function
uint32_t stacksize; ///< stack size requirements in bytes; 0 is default stack size
#if( configSUPPORT_STATIC_ALLOCATION == 1 )
uint32_t *buffer; ///< stack buffer for static allocation; NULL for dynamic allocation
osStaticThreadDef_t *controlblock; ///< control block to hold thread's data for static allocation; NULL for dynamic allocation
#endif
} osThreadDef_t;
/// Timer Definition structure contains timer parameters.
/// \note CAN BE CHANGED: \b os_timer_def is implementation specific in every CMSIS-RTOS.
typedef struct os_timer_def {
os_ptimer ptimer; ///< start address of a timer function
#if( configSUPPORT_STATIC_ALLOCATION == 1 )
osStaticTimerDef_t *controlblock; ///< control block to hold timer's data for static allocation; NULL for dynamic allocation
#endif
} osTimerDef_t;
/// Mutex Definition structure contains setup information for a mutex.
/// \note CAN BE CHANGED: \b os_mutex_def is implementation specific in every CMSIS-RTOS.
typedef struct os_mutex_def {
uint32_t dummy; ///< dummy value.
#if( configSUPPORT_STATIC_ALLOCATION == 1 )
osStaticMutexDef_t *controlblock; ///< control block for static allocation; NULL for dynamic allocation
#endif
} osMutexDef_t;
/// Semaphore Definition structure contains setup information for a semaphore.
/// \note CAN BE CHANGED: \b os_semaphore_def is implementation specific in every CMSIS-RTOS.
typedef struct os_semaphore_def {
uint32_t dummy; ///< dummy value.
#if( configSUPPORT_STATIC_ALLOCATION == 1 )
osStaticSemaphoreDef_t *controlblock; ///< control block for static allocation; NULL for dynamic allocation
#endif
} osSemaphoreDef_t;
/// Definition structure for memory block allocation.
/// \note CAN BE CHANGED: \b os_pool_def is implementation specific in every CMSIS-RTOS.
typedef struct os_pool_def {
uint32_t pool_sz; ///< number of items (elements) in the pool
uint32_t item_sz; ///< size of an item
void *pool; ///< pointer to memory for pool
} osPoolDef_t;
/// Definition structure for message queue.
/// \note CAN BE CHANGED: \b os_messageQ_def is implementation specific in every CMSIS-RTOS.
typedef struct os_messageQ_def {
uint32_t queue_sz; ///< number of elements in the queue
uint32_t item_sz; ///< size of an item
#if( configSUPPORT_STATIC_ALLOCATION == 1 )
uint8_t *buffer; ///< buffer for static allocation; NULL for dynamic allocation
osStaticMessageQDef_t *controlblock; ///< control block to hold queue's data for static allocation; NULL for dynamic allocation
#endif
//void *pool; ///< memory array for messages
} osMessageQDef_t;
/// Definition structure for mail queue.
/// \note CAN BE CHANGED: \b os_mailQ_def is implementation specific in every CMSIS-RTOS.
typedef struct os_mailQ_def {
uint32_t queue_sz; ///< number of elements in the queue
uint32_t item_sz; ///< size of an item
struct os_mailQ_cb **cb;
} osMailQDef_t;
/// Event structure contains detailed information about an event.
/// \note MUST REMAIN UNCHANGED: \b os_event shall be consistent in every CMSIS-RTOS.
/// However the struct may be extended at the end.
typedef struct {
osStatus status; ///< status code: event or error information
union {
uint32_t v; ///< message as 32-bit value
void *p; ///< message or mail as void pointer
int32_t signals; ///< signal flags
} value; ///< event value
union {
osMailQId mail_id; ///< mail id obtained by \ref osMailCreate
osMessageQId message_id; ///< message id obtained by \ref osMessageCreate
} def; ///< event definition
} osEvent;
// ==== Kernel Control Functions ====
/// Initialize the RTOS Kernel for creating objects.
/// \return status code that indicates the execution status of the function.
/// \note MUST REMAIN UNCHANGED: \b osKernelInitialize shall be consistent in every CMSIS-RTOS.
osStatus osKernelInitialize (void);
/// Start the RTOS Kernel.
/// \return status code that indicates the execution status of the function.
/// \note MUST REMAIN UNCHANGED: \b osKernelStart shall be consistent in every CMSIS-RTOS.
osStatus osKernelStart (void);
/// Check if the RTOS kernel is already started.
/// \note MUST REMAIN UNCHANGED: \b osKernelRunning shall be consistent in every CMSIS-RTOS.
/// \return 0 RTOS is not started, 1 RTOS is started.
int32_t osKernelRunning(void);
#if (defined (osFeature_SysTick) && (osFeature_SysTick != 0)) // System Timer available
/// Get the RTOS kernel system timer counter
/// \note MUST REMAIN UNCHANGED: \b osKernelSysTick shall be consistent in every CMSIS-RTOS.
/// \return RTOS kernel system timer as 32-bit value
uint32_t osKernelSysTick (void);
/// The RTOS kernel system timer frequency in Hz
/// \note Reflects the system timer setting and is typically defined in a configuration file.
#define osKernelSysTickFrequency (configTICK_RATE_HZ)
/// Convert a microseconds value to a RTOS kernel system timer value.
/// \param microsec time value in microseconds.
/// \return time value normalized to the \ref osKernelSysTickFrequency
#define osKernelSysTickMicroSec(microsec) (((uint64_t)microsec * (osKernelSysTickFrequency)) / 1000000)
#endif // System Timer available
// ==== Thread Management ====
/// Create a Thread Definition with function, priority, and stack requirements.
/// \param name name of the thread function.
/// \param priority initial priority of the thread function.
/// \param instances number of possible thread instances.
/// \param stacksz stack size (in bytes) requirements for the thread function.
/// \note CAN BE CHANGED: The parameters to \b osThreadDef shall be consistent but the
/// macro body is implementation specific in every CMSIS-RTOS.
#if defined (osObjectsExternal) // object is external
#define osThreadDef(name, thread, priority, instances, stacksz) \
extern const osThreadDef_t os_thread_def_##name
#else // define the object
#if( configSUPPORT_STATIC_ALLOCATION == 1 )
#define osThreadDef(name, thread, priority, instances, stacksz) \
const osThreadDef_t os_thread_def_##name = \
{ #name, (thread), (priority), (instances), (stacksz), NULL, NULL }
#define osThreadStaticDef(name, thread, priority, instances, stacksz, buffer, control) \
const osThreadDef_t os_thread_def_##name = \
{ #name, (thread), (priority), (instances), (stacksz), (buffer), (control) }
#else //configSUPPORT_STATIC_ALLOCATION == 0
#define osThreadDef(name, thread, priority, instances, stacksz) \
const osThreadDef_t os_thread_def_##name = \
{ #name, (thread), (priority), (instances), (stacksz)}
#endif
#endif
/// Access a Thread definition.
/// \param name name of the thread definition object.
/// \note CAN BE CHANGED: The parameter to \b osThread shall be consistent but the
/// macro body is implementation specific in every CMSIS-RTOS.
#define osThread(name) \
&os_thread_def_##name
/// Create a thread and add it to Active Threads and set it to state READY.
/// \param[in] thread_def thread definition referenced with \ref osThread.
/// \param[in] argument pointer that is passed to the thread function as start argument.
/// \return thread ID for reference by other functions or NULL in case of error.
/// \note MUST REMAIN UNCHANGED: \b osThreadCreate shall be consistent in every CMSIS-RTOS.
osThreadId osThreadCreate (const osThreadDef_t *thread_def, void *argument);
/// Return the thread ID of the current running thread.
/// \return thread ID for reference by other functions or NULL in case of error.
/// \note MUST REMAIN UNCHANGED: \b osThreadGetId shall be consistent in every CMSIS-RTOS.
osThreadId osThreadGetId (void);
/// Terminate execution of a thread and remove it from Active Threads.
/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId.
/// \return status code that indicates the execution status of the function.
/// \note MUST REMAIN UNCHANGED: \b osThreadTerminate shall be consistent in every CMSIS-RTOS.
osStatus osThreadTerminate (osThreadId thread_id);
/// Pass control to next thread that is in state \b READY.
/// \return status code that indicates the execution status of the function.
/// \note MUST REMAIN UNCHANGED: \b osThreadYield shall be consistent in every CMSIS-RTOS.
osStatus osThreadYield (void);
/// Change priority of an active thread.
/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId.
/// \param[in] priority new priority value for the thread function.
/// \return status code that indicates the execution status of the function.
/// \note MUST REMAIN UNCHANGED: \b osThreadSetPriority shall be consistent in every CMSIS-RTOS.
osStatus osThreadSetPriority (osThreadId thread_id, osPriority priority);
/// Get current priority of an active thread.
/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId.
/// \return current priority value of the thread function.
/// \note MUST REMAIN UNCHANGED: \b osThreadGetPriority shall be consistent in every CMSIS-RTOS.
osPriority osThreadGetPriority (osThreadId thread_id);
// ==== Generic Wait Functions ====
/// Wait for Timeout (Time Delay).
/// \param[in] millisec time delay value
/// \return status code that indicates the execution status of the function.
osStatus osDelay (uint32_t millisec);
#if (defined (osFeature_Wait) && (osFeature_Wait != 0)) // Generic Wait available
/// Wait for Signal, Message, Mail, or Timeout.
/// \param[in] millisec timeout value or 0 in case of no time-out
/// \return event that contains signal, message, or mail information or error code.
/// \note MUST REMAIN UNCHANGED: \b osWait shall be consistent in every CMSIS-RTOS.
osEvent osWait (uint32_t millisec);
#endif // Generic Wait available
// ==== Timer Management Functions ====
/// Define a Timer object.
/// \param name name of the timer object.
/// \param function name of the timer call back function.
/// \note CAN BE CHANGED: The parameter to \b osTimerDef shall be consistent but the
/// macro body is implementation specific in every CMSIS-RTOS.
#if defined (osObjectsExternal) // object is external
#define osTimerDef(name, function) \
extern const osTimerDef_t os_timer_def_##name
#else // define the object
#if( configSUPPORT_STATIC_ALLOCATION == 1 )
#define osTimerDef(name, function) \
const osTimerDef_t os_timer_def_##name = \
{ (function), NULL }
#define osTimerStaticDef(name, function, control) \
const osTimerDef_t os_timer_def_##name = \
{ (function), (control) }
#else //configSUPPORT_STATIC_ALLOCATION == 0
#define osTimerDef(name, function) \
const osTimerDef_t os_timer_def_##name = \
{ (function) }
#endif
#endif
/// Access a Timer definition.
/// \param name name of the timer object.
/// \note CAN BE CHANGED: The parameter to \b osTimer shall be consistent but the
/// macro body is implementation specific in every CMSIS-RTOS.
#define osTimer(name) \
&os_timer_def_##name
/// Create a timer.
/// \param[in] timer_def timer object referenced with \ref osTimer.
/// \param[in] type osTimerOnce for one-shot or osTimerPeriodic for periodic behavior.
/// \param[in] argument argument to the timer call back function.
/// \return timer ID for reference by other functions or NULL in case of error.
/// \note MUST REMAIN UNCHANGED: \b osTimerCreate shall be consistent in every CMSIS-RTOS.
osTimerId osTimerCreate (const osTimerDef_t *timer_def, os_timer_type type, void *argument);
/// Start or restart a timer.
/// \param[in] timer_id timer ID obtained by \ref osTimerCreate.
/// \param[in] millisec time delay value of the timer.
/// \return status code that indicates the execution status of the function.
/// \note MUST REMAIN UNCHANGED: \b osTimerStart shall be consistent in every CMSIS-RTOS.
osStatus osTimerStart (osTimerId timer_id, uint32_t millisec);
/// Stop the timer.
/// \param[in] timer_id timer ID obtained by \ref osTimerCreate.
/// \return status code that indicates the execution status of the function.
/// \note MUST REMAIN UNCHANGED: \b osTimerStop shall be consistent in every CMSIS-RTOS.
osStatus osTimerStop (osTimerId timer_id);
/// Delete a timer that was created by \ref osTimerCreate.
/// \param[in] timer_id timer ID obtained by \ref osTimerCreate.
/// \return status code that indicates the execution status of the function.
/// \note MUST REMAIN UNCHANGED: \b osTimerDelete shall be consistent in every CMSIS-RTOS.
osStatus osTimerDelete (osTimerId timer_id);
// ==== Signal Management ====
/// Set the specified Signal Flags of an active thread.
/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId.
/// \param[in] signals specifies the signal flags of the thread that should be set.
/// \return osOK if successful, osErrorOS if failed.
/// \note MUST REMAIN UNCHANGED: \b osSignalSet shall be consistent in every CMSIS-RTOS.
int32_t osSignalSet (osThreadId thread_id, int32_t signals);
/// Clear the specified Signal Flags of an active thread.
/// \param[in] thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId.
/// \param[in] signals specifies the signal flags of the thread that shall be cleared.
/// \return previous signal flags of the specified thread or 0x80000000 in case of incorrect parameters.
/// \note MUST REMAIN UNCHANGED: \b osSignalClear shall be consistent in every CMSIS-RTOS.
int32_t osSignalClear (osThreadId thread_id, int32_t signals);
/// Wait for one or more Signal Flags to become signaled for the current \b RUNNING thread.
/// \param[in] signals wait until all specified signal flags set or 0 for any single signal flag.
/// \param[in] millisec timeout value or 0 in case of no time-out.
/// \return event flag information or error code.
/// \note MUST REMAIN UNCHANGED: \b osSignalWait shall be consistent in every CMSIS-RTOS.
osEvent osSignalWait (int32_t signals, uint32_t millisec);
// ==== Mutex Management ====
/// Define a Mutex.
/// \param name name of the mutex object.
/// \note CAN BE CHANGED: The parameter to \b osMutexDef shall be consistent but the
/// macro body is implementation specific in every CMSIS-RTOS.
#if defined (osObjectsExternal) // object is external
#define osMutexDef(name) \
extern const osMutexDef_t os_mutex_def_##name
#else // define the object
#if( configSUPPORT_STATIC_ALLOCATION == 1 )
#define osMutexDef(name) \
const osMutexDef_t os_mutex_def_##name = { 0, NULL }
#define osMutexStaticDef(name, control) \
const osMutexDef_t os_mutex_def_##name = { 0, (control) }
#else //configSUPPORT_STATIC_ALLOCATION == 0
#define osMutexDef(name) \
const osMutexDef_t os_mutex_def_##name = { 0 }
#endif
#endif
/// Access a Mutex definition.
/// \param name name of the mutex object.
/// \note CAN BE CHANGED: The parameter to \b osMutex shall be consistent but the
/// macro body is implementation specific in every CMSIS-RTOS.
#define osMutex(name) \
&os_mutex_def_##name
/// Create and Initialize a Mutex object.
/// \param[in] mutex_def mutex definition referenced with \ref osMutex.
/// \return mutex ID for reference by other functions or NULL in case of error.
/// \note MUST REMAIN UNCHANGED: \b osMutexCreate shall be consistent in every CMSIS-RTOS.
osMutexId osMutexCreate (const osMutexDef_t *mutex_def);
/// Wait until a Mutex becomes available.
/// \param[in] mutex_id mutex ID obtained by \ref osMutexCreate.
/// \param[in] millisec timeout value or 0 in case of no time-out.
/// \return status code that indicates the execution status of the function.
/// \note MUST REMAIN UNCHANGED: \b osMutexWait shall be consistent in every CMSIS-RTOS.
osStatus osMutexWait (osMutexId mutex_id, uint32_t millisec);
/// Release a Mutex that was obtained by \ref osMutexWait.
/// \param[in] mutex_id mutex ID obtained by \ref osMutexCreate.
/// \return status code that indicates the execution status of the function.
/// \note MUST REMAIN UNCHANGED: \b osMutexRelease shall be consistent in every CMSIS-RTOS.
osStatus osMutexRelease (osMutexId mutex_id);
/// Delete a Mutex that was created by \ref osMutexCreate.
/// \param[in] mutex_id mutex ID obtained by \ref osMutexCreate.
/// \return status code that indicates the execution status of the function.
/// \note MUST REMAIN UNCHANGED: \b osMutexDelete shall be consistent in every CMSIS-RTOS.
osStatus osMutexDelete (osMutexId mutex_id);
// ==== Semaphore Management Functions ====
#if (defined (osFeature_Semaphore) && (osFeature_Semaphore != 0)) // Semaphore available
/// Define a Semaphore object.
/// \param name name of the semaphore object.
/// \note CAN BE CHANGED: The parameter to \b osSemaphoreDef shall be consistent but the
/// macro body is implementation specific in every CMSIS-RTOS.
#if defined (osObjectsExternal) // object is external
#define osSemaphoreDef(name) \
extern const osSemaphoreDef_t os_semaphore_def_##name
#else // define the object
#if( configSUPPORT_STATIC_ALLOCATION == 1 )
#define osSemaphoreDef(name) \
const osSemaphoreDef_t os_semaphore_def_##name = { 0, NULL }
#define osSemaphoreStaticDef(name, control) \
const osSemaphoreDef_t os_semaphore_def_##name = { 0, (control) }
#else //configSUPPORT_STATIC_ALLOCATION == 0
#define osSemaphoreDef(name) \
const osSemaphoreDef_t os_semaphore_def_##name = { 0 }
#endif
#endif
/// Access a Semaphore definition.
/// \param name name of the semaphore object.
/// \note CAN BE CHANGED: The parameter to \b osSemaphore shall be consistent but the
/// macro body is implementation specific in every CMSIS-RTOS.
#define osSemaphore(name) \
&os_semaphore_def_##name
/// Create and Initialize a Semaphore object used for managing resources.
/// \param[in] semaphore_def semaphore definition referenced with \ref osSemaphore.
/// \param[in] count number of available resources.
/// \return semaphore ID for reference by other functions or NULL in case of error.
/// \note MUST REMAIN UNCHANGED: \b osSemaphoreCreate shall be consistent in every CMSIS-RTOS.
osSemaphoreId osSemaphoreCreate (const osSemaphoreDef_t *semaphore_def, int32_t count);
/// Wait until a Semaphore token becomes available.
/// \param[in] semaphore_id semaphore object referenced with \ref osSemaphoreCreate.
/// \param[in] millisec timeout value or 0 in case of no time-out.
/// \return number of available tokens, or -1 in case of incorrect parameters.
/// \note MUST REMAIN UNCHANGED: \b osSemaphoreWait shall be consistent in every CMSIS-RTOS.
int32_t osSemaphoreWait (osSemaphoreId semaphore_id, uint32_t millisec);
/// Release a Semaphore token.
/// \param[in] semaphore_id semaphore object referenced with \ref osSemaphoreCreate.
/// \return status code that indicates the execution status of the function.
/// \note MUST REMAIN UNCHANGED: \b osSemaphoreRelease shall be consistent in every CMSIS-RTOS.
osStatus osSemaphoreRelease (osSemaphoreId semaphore_id);
/// Delete a Semaphore that was created by \ref osSemaphoreCreate.
/// \param[in] semaphore_id semaphore object referenced with \ref osSemaphoreCreate.
/// \return status code that indicates the execution status of the function.
/// \note MUST REMAIN UNCHANGED: \b osSemaphoreDelete shall be consistent in every CMSIS-RTOS.
osStatus osSemaphoreDelete (osSemaphoreId semaphore_id);
#endif // Semaphore available
// ==== Memory Pool Management Functions ====
#if (defined (osFeature_Pool) && (osFeature_Pool != 0)) // Memory Pool Management available
/// \brief Define a Memory Pool.
/// \param name name of the memory pool.
/// \param no maximum number of blocks (objects) in the memory pool.
/// \param type data type of a single block (object).
/// \note CAN BE CHANGED: The parameter to \b osPoolDef shall be consistent but the
/// macro body is implementation specific in every CMSIS-RTOS.
#if defined (osObjectsExternal) // object is external
#define osPoolDef(name, no, type) \
extern const osPoolDef_t os_pool_def_##name
#else // define the object
#define osPoolDef(name, no, type) \
const osPoolDef_t os_pool_def_##name = \
{ (no), sizeof(type), NULL }
#endif
/// \brief Access a Memory Pool definition.
/// \param name name of the memory pool
/// \note CAN BE CHANGED: The parameter to \b osPool shall be consistent but the
/// macro body is implementation specific in every CMSIS-RTOS.
#define osPool(name) \
&os_pool_def_##name
/// Create and Initialize a memory pool.
/// \param[in] pool_def memory pool definition referenced with \ref osPool.
/// \return memory pool ID for reference by other functions or NULL in case of error.
/// \note MUST REMAIN UNCHANGED: \b osPoolCreate shall be consistent in every CMSIS-RTOS.
osPoolId osPoolCreate (const osPoolDef_t *pool_def);
/// Allocate a memory block from a memory pool.
/// \param[in] pool_id memory pool ID obtain referenced with \ref osPoolCreate.
/// \return address of the allocated memory block or NULL in case of no memory available.
/// \note MUST REMAIN UNCHANGED: \b osPoolAlloc shall be consistent in every CMSIS-RTOS.
void *osPoolAlloc (osPoolId pool_id);
/// Allocate a memory block from a memory pool and set memory block to zero.
/// \param[in] pool_id memory pool ID obtain referenced with \ref osPoolCreate.
/// \return address of the allocated memory block or NULL in case of no memory available.
/// \note MUST REMAIN UNCHANGED: \b osPoolCAlloc shall be consistent in every CMSIS-RTOS.
void *osPoolCAlloc (osPoolId pool_id);
/// Return an allocated memory block back to a specific memory pool.
/// \param[in] pool_id memory pool ID obtain referenced with \ref osPoolCreate.
/// \param[in] block address of the allocated memory block that is returned to the memory pool.
/// \return status code that indicates the execution status of the function.
/// \note MUST REMAIN UNCHANGED: \b osPoolFree shall be consistent in every CMSIS-RTOS.
osStatus osPoolFree (osPoolId pool_id, void *block);
#endif // Memory Pool Management available
// ==== Message Queue Management Functions ====
#if (defined (osFeature_MessageQ) && (osFeature_MessageQ != 0)) // Message Queues available
/// \brief Create a Message Queue Definition.
/// \param name name of the queue.
/// \param queue_sz maximum number of messages in the queue.
/// \param type data type of a single message element (for debugger).
/// \note CAN BE CHANGED: The parameter to \b osMessageQDef shall be consistent but the
/// macro body is implementation specific in every CMSIS-RTOS.
#if defined (osObjectsExternal) // object is external
#define osMessageQDef(name, queue_sz, type) \
extern const osMessageQDef_t os_messageQ_def_##name
#else // define the object
#if( configSUPPORT_STATIC_ALLOCATION == 1 )
#define osMessageQDef(name, queue_sz, type) \
const osMessageQDef_t os_messageQ_def_##name = \
{ (queue_sz), sizeof (type), NULL, NULL }
#define osMessageQStaticDef(name, queue_sz, type, buffer, control) \
const osMessageQDef_t os_messageQ_def_##name = \
{ (queue_sz), sizeof (type) , (buffer), (control)}
#else //configSUPPORT_STATIC_ALLOCATION == 1
#define osMessageQDef(name, queue_sz, type) \
const osMessageQDef_t os_messageQ_def_##name = \
{ (queue_sz), sizeof (type) }
#endif
#endif
/// \brief Access a Message Queue Definition.
/// \param name name of the queue
/// \note CAN BE CHANGED: The parameter to \b osMessageQ shall be consistent but the
/// macro body is implementation specific in every CMSIS-RTOS.
#define osMessageQ(name) \
&os_messageQ_def_##name
/// Create and Initialize a Message Queue.
/// \param[in] queue_def queue definition referenced with \ref osMessageQ.
/// \param[in] thread_id thread ID (obtained by \ref osThreadCreate or \ref osThreadGetId) or NULL.
/// \return message queue ID for reference by other functions or NULL in case of error.
/// \note MUST REMAIN UNCHANGED: \b osMessageCreate shall be consistent in every CMSIS-RTOS.
osMessageQId osMessageCreate (const osMessageQDef_t *queue_def, osThreadId thread_id);
/// Put a Message to a Queue.
/// \param[in] queue_id message queue ID obtained with \ref osMessageCreate.
/// \param[in] info message information.
/// \param[in] millisec timeout value or 0 in case of no time-out.
/// \return status code that indicates the execution status of the function.
/// \note MUST REMAIN UNCHANGED: \b osMessagePut shall be consistent in every CMSIS-RTOS.
osStatus osMessagePut (osMessageQId queue_id, uint32_t info, uint32_t millisec);
/// Get a Message or Wait for a Message from a Queue.
/// \param[in] queue_id message queue ID obtained with \ref osMessageCreate.
/// \param[in] millisec timeout value or 0 in case of no time-out.
/// \return event information that includes status code.
/// \note MUST REMAIN UNCHANGED: \b osMessageGet shall be consistent in every CMSIS-RTOS.
osEvent osMessageGet (osMessageQId queue_id, uint32_t millisec);
#endif // Message Queues available
// ==== Mail Queue Management Functions ====
#if (defined (osFeature_MailQ) && (osFeature_MailQ != 0)) // Mail Queues available
/// \brief Create a Mail Queue Definition.
/// \param name name of the queue
/// \param queue_sz maximum number of messages in queue
/// \param type data type of a single message element
/// \note CAN BE CHANGED: The parameter to \b osMailQDef shall be consistent but the
/// macro body is implementation specific in every CMSIS-RTOS.
#if defined (osObjectsExternal) // object is external
#define osMailQDef(name, queue_sz, type) \
extern struct os_mailQ_cb *os_mailQ_cb_##name \
extern osMailQDef_t os_mailQ_def_##name
#else // define the object
#define osMailQDef(name, queue_sz, type) \
struct os_mailQ_cb *os_mailQ_cb_##name; \
const osMailQDef_t os_mailQ_def_##name = \
{ (queue_sz), sizeof (type), (&os_mailQ_cb_##name) }
#endif
/// \brief Access a Mail Queue Definition.
/// \param name name of the queue
/// \note CAN BE CHANGED: The parameter to \b osMailQ shall be consistent but the
/// macro body is implementation specific in every CMSIS-RTOS.
#define osMailQ(name) \
&os_mailQ_def_##name
/// Create and Initialize mail queue.
/// \param[in] queue_def reference to the mail queue definition obtain with \ref osMailQ
/// \param[in] thread_id thread ID (obtained by \ref osThreadCreate or \ref osThreadGetId) or NULL.
/// \return mail queue ID for reference by other functions or NULL in case of error.
/// \note MUST REMAIN UNCHANGED: \b osMailCreate shall be consistent in every CMSIS-RTOS.
osMailQId osMailCreate (const osMailQDef_t *queue_def, osThreadId thread_id);
/// Allocate a memory block from a mail.
/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate.
/// \param[in] millisec timeout value or 0 in case of no time-out
/// \return pointer to memory block that can be filled with mail or NULL in case of error.
/// \note MUST REMAIN UNCHANGED: \b osMailAlloc shall be consistent in every CMSIS-RTOS.
void *osMailAlloc (osMailQId queue_id, uint32_t millisec);
/// Allocate a memory block from a mail and set memory block to zero.
/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate.
/// \param[in] millisec timeout value or 0 in case of no time-out
/// \return pointer to memory block that can be filled with mail or NULL in case of error.
/// \note MUST REMAIN UNCHANGED: \b osMailCAlloc shall be consistent in every CMSIS-RTOS.
void *osMailCAlloc (osMailQId queue_id, uint32_t millisec);
/// Put a mail to a queue.
/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate.
/// \param[in] mail memory block previously allocated with \ref osMailAlloc or \ref osMailCAlloc.
/// \return status code that indicates the execution status of the function.
/// \note MUST REMAIN UNCHANGED: \b osMailPut shall be consistent in every CMSIS-RTOS.
osStatus osMailPut (osMailQId queue_id, void *mail);
/// Get a mail from a queue.
/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate.
/// \param[in] millisec timeout value or 0 in case of no time-out
/// \return event that contains mail information or error code.
/// \note MUST REMAIN UNCHANGED: \b osMailGet shall be consistent in every CMSIS-RTOS.
osEvent osMailGet (osMailQId queue_id, uint32_t millisec);
/// Free a memory block from a mail.
/// \param[in] queue_id mail queue ID obtained with \ref osMailCreate.
/// \param[in] mail pointer to the memory block that was obtained with \ref osMailGet.
/// \return status code that indicates the execution status of the function.
/// \note MUST REMAIN UNCHANGED: \b osMailFree shall be consistent in every CMSIS-RTOS.
osStatus osMailFree (osMailQId queue_id, void *mail);
#endif // Mail Queues available
/*************************** Additional specific APIs to Free RTOS ************/
/**
* @brief Handles the tick increment
* @param none.
* @retval none.
*/
void osSystickHandler(void);
#if ( INCLUDE_eTaskGetState == 1 )
/**
* @brief Obtain the state of any thread.
* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId.
* @retval the stae of the thread, states are encoded by the osThreadState enumerated type.
*/
osThreadState osThreadGetState(osThreadId thread_id);
#endif /* INCLUDE_eTaskGetState */
#if ( INCLUDE_eTaskGetState == 1 )
/**
* @brief Check if a thread is already suspended or not.
* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId.
* @retval status code that indicates the execution status of the function.
*/
osStatus osThreadIsSuspended(osThreadId thread_id);
#endif /* INCLUDE_eTaskGetState */
/**
* @brief Suspend execution of a thread.
* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId.
* @retval status code that indicates the execution status of the function.
*/
osStatus osThreadSuspend (osThreadId thread_id);
/**
* @brief Resume execution of a suspended thread.
* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId.
* @retval status code that indicates the execution status of the function.
*/
osStatus osThreadResume (osThreadId thread_id);
/**
* @brief Suspend execution of a all active threads.
* @retval status code that indicates the execution status of the function.
*/
osStatus osThreadSuspendAll (void);
/**
* @brief Resume execution of a all suspended threads.
* @retval status code that indicates the execution status of the function.
*/
osStatus osThreadResumeAll (void);
/**
* @brief Delay a task until a specified time
* @param PreviousWakeTime Pointer to a variable that holds the time at which the
* task was last unblocked. PreviousWakeTime must be initialised with the current time
* prior to its first use (PreviousWakeTime = osKernelSysTick() )
* @param millisec time delay value
* @retval status code that indicates the execution status of the function.
*/
osStatus osDelayUntil (uint32_t *PreviousWakeTime, uint32_t millisec);
/**
* @brief Abort the delay for a specific thread
* @param thread_id thread ID obtained by \ref osThreadCreate or \ref osThreadGetId
* @retval status code that indicates the execution status of the function.
*/
osStatus osAbortDelay(osThreadId thread_id);
/**
* @brief Lists all the current threads, along with their current state
* and stack usage high water mark.
* @param buffer A buffer into which the above mentioned details
* will be written
* @retval status code that indicates the execution status of the function.
*/
osStatus osThreadList (uint8_t *buffer);
/**
* @brief Receive an item from a queue without removing the item from the queue.
* @param queue_id message queue ID obtained with \ref osMessageCreate.
* @param millisec timeout value or 0 in case of no time-out.
* @retval event information that includes status code.
*/
osEvent osMessagePeek (osMessageQId queue_id, uint32_t millisec);
/**
* @brief Get the number of messaged stored in a queue.
* @param queue_id message queue ID obtained with \ref osMessageCreate.
* @retval number of messages stored in a queue.
*/
uint32_t osMessageWaiting(osMessageQId queue_id);
/**
* @brief Get the available space in a message queue.
* @param queue_id message queue ID obtained with \ref osMessageCreate.
* @retval available space in a message queue.
*/
uint32_t osMessageAvailableSpace(osMessageQId queue_id);
/**
* @brief Delete a Message Queue
* @param queue_id message queue ID obtained with \ref osMessageCreate.
* @retval status code that indicates the execution status of the function.
*/
osStatus osMessageDelete (osMessageQId queue_id);
/**
* @brief Create and Initialize a Recursive Mutex
* @param mutex_def mutex definition referenced with \ref osMutex.
* @retval mutex ID for reference by other functions or NULL in case of error..
*/
osMutexId osRecursiveMutexCreate (const osMutexDef_t *mutex_def);
/**
* @brief Release a Recursive Mutex
* @param mutex_id mutex ID obtained by \ref osRecursiveMutexCreate.
* @retval status code that indicates the execution status of the function.
*/
osStatus osRecursiveMutexRelease (osMutexId mutex_id);
/**
* @brief Release a Recursive Mutex
* @param mutex_id mutex ID obtained by \ref osRecursiveMutexCreate.
* @param millisec timeout value or 0 in case of no time-out.
* @retval status code that indicates the execution status of the function.
*/
osStatus osRecursiveMutexWait (osMutexId mutex_id, uint32_t millisec);
/**
* @brief Returns the current count value of a counting semaphore
* @param semaphore_id semaphore_id ID obtained by \ref osSemaphoreCreate.
* @retval count value
*/
uint32_t osSemaphoreGetCount(osSemaphoreId semaphore_id);
#ifdef __cplusplus
}
#endif
#endif // _CMSIS_OS_H
PT606668DC\Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS
最新推荐文章于 2024-09-30 14:28:41 发布
扫一扫
322
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
