sysbench测试三部曲：
prepare -> run -> cleanup
帮助信息
[root@localhost ~]# sysbench --help
Usage:
sysbench [options]... [testname] [command]
Commands implemented by most tests: prepare run cleanup help
General options:
--threads=N number of threads to use [1]
--events=N limit for total number of events [0]
--time=N limit for total execution time in seconds [10]
--forced-shutdown=STRING number of seconds to wait after the --time limit before forcing shutdown, or 'off' to disable [off]
--thread-stack-size=SIZE size of stack per thread [64K]
--rate=N average transactions rate. 0 for unlimited rate [0]
--report-interval=N periodically report intermediate statistics with a specified interval in seconds. 0 disables intermediate reports [0]
--report-checkpoints=[LIST,...] dump full statistics and reset all counters at specified points in time. The argument is a list of comma-separated values representing the amount of time in seconds elapsed from start of test when report checkpoint(s) must be performed. Report checkpoints are off by default. []
--debug[=on|off] print more debugging info [off]
--validate[=on|off] perform validation checks where possible [off]
--help[=on|off] print help and exit [off]
--version[=on|off] print version and exit [off]
--config-file=FILENAME File containing command line options
--tx-rate=N deprecated alias for --rate [0]
--max-requests=N deprecated alias for --events [0]
--max-time=N deprecated alias for --time [0]
--num-threads=N deprecated alias for --threads [1]
Pseudo-Random Numbers Generator options:
--rand-type=STRING random numbers distribution {uniform,gaussian,special,pareto} [special]
--rand-spec-iter=N number of iterations used for numbers generation [12]
--rand-spec-pct=N percentage of values to be treated as 'special' (for special distribution) [1]
--rand-spec-res=N percentage of 'special' values to use (for special distribution) [75]
--rand-seed=N seed for random number generator. When 0, the current time is used as a RNG seed. [0]
--rand-pareto-h=N parameter h for pareto distribution [0.2]
Log options:
--verbosity=N verbosity level {5 - debug, 0 - only critical messages} [3]
--percentile=N percentile to calculate in latency statistics (1-100). Use the special value of 0 to disable percentile calculations [95]
--histogram[=on|off] print latency histogram in report [off]
General database options:
--db-driver=STRING specifies database driver to use ('help' to get list of available drivers) [mysql]
--db-ps-mode=STRING prepared statements usage mode {auto, disable} [auto]
--db-debug[=on|off] print database-specific debug information [off]
Compiled-in database drivers:
mysql - MySQL driver
pgsql - PostgreSQL driver
mysql options:
--mysql-host=[LIST,...] MySQL server host [localhost]
--mysql-port=[LIST,...] MySQL server port [3306]
--mysql-socket=[LIST,...] MySQL socket
--mysql-user=STRING MySQL user [sbtest]
--mysql-password=STRING MySQL password []
--mysql-db=STRING MySQL database name [sbtest]
--mysql-ssl[=on|off] use SSL connections, if available in the client library [off]
--mysql-ssl-cipher=STRING use specific cipher for SSL connections []
--mysql-compression[=on|off] use compression, if available in the client library [off]
--mysql-debug[=on|off] trace all client library calls [off]
--mysql-ignore-errors=[LIST,...] list of errors to ignore, or "all" [1213,1020,1205]
--mysql-dry-run[=on|off] Dry run, pretend that all MySQL client API calls are successful without executing them [off]
pgsql options:
--pgsql-host=STRING PostgreSQL server host [localhost]
--pgsql-port=N PostgreSQL server port [5432]
--pgsql-user=STRING PostgreSQL user [sbtest]
--pgsql-password=STRING PostgreSQL password []
--pgsql-db=STRING PostgreSQL database name [sbtest]
Compiled-in tests:
fileio - File I/O test
cpu - CPU performance test
memory - Memory functions speed test
threads - Threads subsystem performance test
mutex - Mutex performance test
See 'sysbench <testname> help' for a list of options for each test.
Sysbench的测试主要包括以下几个方面：
1、磁盘io性能
2、cpu性能
3、内存分配及传输速度
4、POSIX线程性能
5、调度程序性能
6、数据库性能(OLTP基准测试).使用示例：
1.准备三个10G的文件
sysbench fileio --max-requests=1000000 --num-threads=4 --file-num=3 --file- total-size=30G --file-test-mode=rndwr prepare
2.测试cpu性能
sysbench --threads=4 cpu --cpu-max-prime=10000000 run
3.测试内存顺序读
sysbench --threads=4 memory --memory-total-size=6G --memory-oper=read -- memory-access-mode=seq run
4.测试内存随机读
sysbench --threads=4 --test=memory --memory-total-size=6G --memory- oper=read --memory-access-mode=rnd run
5.测试内存性能顺序写
sysbench --threads=4 --test=memory --memory-total-size=6G --memory- oper=write --memory-access-mode=seq run
6.测试内存性能随机写
sysbench --threads=4 --test=memory --memory-total-size=6G --memory-oper=write --memory-access-mode=rnd run
7.测试硬盘随机读写
sysbench fileio --max-requests=1000000 --num-threads=4 --file-num=3 --file-total-size=30G --file-test-mode=rndrw run
8.测试硬盘随机读
sysbench fileio --max-requests=1000000 --num-threads=4 --file-num=3 --file-total-size=30G --file-test-mode=rndrd run
9.测试硬盘随机写
sysbench fileio --max-requests=1000000 --num-threads=4 --file-num=3 --file-total-size=30G --file-test-mode=rndwr run
10.测试硬盘顺序重写
sysbench fileio --max-requests=1000000 --threads=4 --file-num=3 --file-total-size=30G --file-test-mode=seqrewr run
11.测试硬盘顺序读
sysbench fileio --max-requests=1000000 --num-threads=4 --file-num=3 --file-total-size=30G --file-test-mode=seqrd run
12.测试硬盘性能顺序写
sysbench fileio --max-requests=1000000 --num-threads=4 --file-num=3 --file-total-size=30G --file-test-mode=seqwr run
针对数据库性能的测试
mysql数据库
1.创建测试库
mysql> create database sysbench_test;
2.准备测试数据
sysbench /usr/share/sysbench/oltp_read_write.lua --tables=3 --table_size=10000000 --mysql-user=root --mysql-password=123456 --mysql-host=192.168.80.100 --mysql-port=3306 --mysql-db=sysbench_test prepare
3.数据库测试
sysbench /usr/share/sysbench/oltp_point_select.lua --tables=3 --table_size=10000000 --mysql-user=root --mysql-password=123456 --mysql-host=192.168.80.100 --mysql-port=3306 --mysql-db=sysbench_test --threads=128 --time=100 --report-interval=5 run
关注指标：
response time avg：平均响应时间（后面的95%的大小可以通过–percentile=98的方式去更改）。
transactions：精确的说是这一项后面的TPS，但如果使用了–skip-trx=on，这项事务数为0，需要用total number of events去除以总时间，得到tps（其实还可以分为读tps和写tps）。
queries：用它除以总时间，得到吞吐量QPS。
#清理数据
sysbench /usr/share/sysbench/oltp_read_write.lua --tables=3 --table_size=10000000 --mysql-user=root --mysql-password=123456 --mysql-host=192.168.80.100 --mysql-port=3306 --mysql-db=sysbench_test cleanup
各个脚本的测试用途：
oltp_read_write：测试数据库的总和读写tps
oltp_read_only：测试数据库的只读性能
oltp_delete： 测试数据库删除性能
oltp_update_index：测试数据库更新索引字段等的性能
oltp_insert： 测试数据库数据插入性能
oltp_write_only：测试数据库的写入性能
oltp_point_select：测试数据库的查询性能postgresql数据库
1.准备创建表和数据：
sysbench --db-driver=pgsql --time=1 --threads=1000 --report-interval=5 --pgsql-host=192.168.1.100 --pgsql-port=5001 --pgsql-user=testpgs --pgsql-password=123456 --pgsql-db=test_db --tables=1 --table_size=1000000 oltp_read_write --db-ps-mode=disable prepare
2.测试数据库的只读性能，使用的是oltp_read_only模式：
sysbench --db-driver=pgsql --time=1 --threads=1000 --report-interval=5 --pgsql-host=192.168.1.100 --pgsql-port=5001 --pgsql-user=testpgs --pgsql-password=123456 --pgsql-db=test_db --tables=1 --table_size=1000000 oltp_read_only --db-ps-mode=disable run
SQL statistics:
queries performed:
read: 25242
write: 0
other: 3606
total: 28848
transactions: 1803 (859.40 per sec.)
queries: 28848 (13750.37 per sec.)
ignored errors: 0 (0.00 per sec.)
reconnects: 0 (0.00 per sec.)
General statistics:
total time: 2.0931s
total number of events: 1803
Latency (ms):
min: 204.65
avg: 865.57
max: 1312.73
95th percentile: 1191.92
sum: 1560630.86
3. 测试数据库的删除性能，使用的是oltp_delete模式：
sysbench --db-driver=pgsql --time=1 --threads=1000 --report-interval=5 --pgsql-host=192.168.1.100 --pgsql-port=5001 --pgsql-user=testpgs --pgsql-password=123456 --pgsql-db=test_db --tables=1 --table_size=1000000 oltp_delete --db-ps-mode=disable run
SQL statistics:
queries performed:
read: 0
write: 11506
other: 9290
total: 20796
transactions: 20796 (16813.13 per sec.)
queries: 20796 (16813.13 per sec.)
ignored errors: 0 (0.00 per sec.)
reconnects: 0 (0.00 per sec.)
General statistics:
total time: 1.2349s
total number of events: 20796
Latency (ms):
min: 3.16
avg: 51.30
max: 255.24
95th percentile: 58.92
sum: 1066896.74
4.测试数据库的更新索引字段的性能，使用的是oltp_update_index模式：
sysbench --db-driver=pgsql --time=1 --threads=1000 --report-interval=5 --pgsql-host=192.168.1.100 --pgsql-port=5001 --pgsql-user=testpgs --pgsql-password=123456 --pgsql-db=test_db --tables=1 --table_size=1000000 oltp_update_index --db-ps-mode=disable run
SQL statistics:
queries performed:
read: 0
write: 17355
other: 0
total: 17355
transactions: 17355 (14499.51 per sec.)
queries: 17355 (14499.51 per sec.)
ignored errors: 0 (0.00 per sec.)
reconnects: 0 (0.00 per sec.)
General statistics:
total time: 1.1948s
total number of events: 17355
Latency (ms):
min: 5.27
avg: 61.99
max: 244.16
95th percentile: 75.82
sum: 1075762.57
5.测试数据库的更新非索引字段的性能，使用的是oltp_update_non_index模式：
sysbench --db-driver=pgsql --time=1 --threads=1000 --report-interval=5 --pgsql-host=192.168.1.100 --pgsql-port=5001 --pgsql-user=testpgs --pgsql-password=123456 --pgsql-db=test_db --tables=1 --table_size=1000000 oltp_update_non_index --db-ps-mode=disable run
SQL statistics:
queries performed:
read: 0
write: 17801
other: 0
total: 17801
transactions: 17801 (14435.25 per sec.)
queries: 17801 (14435.25 per sec.)
ignored errors: 0 (0.00 per sec.)
reconnects: 0 (0.00 per sec.)
General statistics:
total time: 1.2312s
total number of events: 17801
Latency (ms):
min: 13.85
avg: 60.14
max: 261.74
95th percentile: 82.96
sum: 1070611.81
6.测试数据库的插入性能，使用的是oltp_insert模式：
sysbench --db-driver=pgsql --time=1 --threads=1000 --report-interval=5 --pgsql-host=192.168.1.100 --pgsql-port=5001 --pgsql-user=testpgs --pgsql-password=123456 --pgsql-db=test_db --tables=1 --table_size=1000000 oltp_insert --db-ps-mode=disable run
SQL statistics:
queries performed:
read: 0
write: 19685
other: 0
total: 19685
transactions: 19685 (16335.50 per sec.)
queries: 19685 (16335.50 per sec.)
ignored errors: 0 (0.00 per sec.)
reconnects: 0 (0.00 per sec.)
General statistics:
total time: 1.2000s
total number of events: 19685
Latency (ms):
min: 4.49
avg: 52.90
max: 228.04
95th percentile: 77.19
sum: 1041424.34
7.测试数据库的写入性能，使用的是oltp_write_only模式：
sysbench --db-driver=pgsql --time=1 --threads=1000 --report-interval=5 --pgsql-host=192.168.1.100 --pgsql-port=5001 --pgsql-user=testpgs --pgsql-password=123456 --pgsql-db=test_db --tables=1 --table_size=1000000 oltp_write_only --db-ps-mode=disable run
SQL statistics:
queries performed:
read: 0
write: 17940
other: 9112
total: 27052
transactions: 4480 (3374.72 per sec.)
queries: 27052 (20377.87 per sec.)
ignored errors: 43 (32.39 per sec.)
reconnects: 0 (0.00 per sec.)
General statistics:
total time: 1.3226s
total number of events: 4480
Latency (ms):
min: 65.01
avg: 248.24
max: 702.04
95th percentile: 314.45
sum: 1112124.54
8.测试数据库的综合读写TPS，使用的是oltp_read_write模式
sysbench --db-driver=pgsql --time=1 --threads=1000 --report-interval=5 --pgsql-host=192.168.1.100 --pgsql-port=5001 --pgsql-user=testpgs --pgsql-password=123456 --pgsql-db=test_db --tables=1 --table_size=1000000 oltp_read_write --db-ps-mode=disable run
SQL statistics:
queries performed:
read: 25004
write: 7114
other: 3588
total: 35706
transactions: 1779 (899.49 per sec.)
queries: 35706 (18053.45 per sec.)
ignored errors: 7 (3.54 per sec.)
reconnects: 0 (0.00 per sec.)
General statistics:
total time: 1.9728s
total number of events: 1779
Latency (ms):
min: 199.06
avg: 854.98
max: 1804.89
95th percentile: 1191.92
sum: 1521010.69
9.测试数据库的综合读写TPS，使用的是oltp_read_write模式：
sysbench --db-driver=pgsql --time=1 --threads=500 --report-interval=5 --pgsql-host=192.168.1.100 --pgsql-port=5001 --pgsql-user=testpgs --pgsql-password=123456 --pgsql-db=test_db --tables=1 --table_size=1000000 oltp_read_write --db-ps-mode=disable run
SQL statistics:
queries performed:
read: 11704
write: 3333
other: 1677
total: 16714
transactions: 833 (601.84 per sec.)
queries: 16714 (12075.74 per sec.)
ignored errors: 3 (2.17 per sec.)
reconnects: 0 (0.00 per sec.)
General statistics:
total time: 1.3792s
total number of events: 833
Latency (ms):
min: 293.30
avg: 731.76
max: 1353.39
95th percentile: 1170.65
sum: 609554.21
9.使用上面的命令，sysbench工具会根据你的指令构造出各种各样的SQL语句去更新或者查询1张测试表里的数据，同时监测出数据库的压测性能指标，最后完成压测之后，可以执行下面的cleanup命令，清理数据。
sysbench --db-driver=pgsql --time=1 --threads=1000 --report-interval=5 --pgsql-host=192.168.1.100 --pgsql-port=5001 --pgsql-user=testpgs --pgsql-password=123456 --pgsql-db=test_db --tables=1 --table_size=1000000 oltp_read_write --db-ps-mode=disable cleanupOracle数据库
针对Oracle数据库的测试，sysbench需要编译安装，开启支持，默认不支持针对Oracle数据库的测试
sysbench版本：0.5
1.安装依赖
yum -y install make automake libtool pkgconfig libaio-devel
yum -y install mariadb-devel openssl-devel
yum -y install postgresql-devel
2.下载源码编译安装
git clone https://github.com/akopytov/sysbench.git
或者
git clone https://gitee.com/rtoax/sysbench.git
./autogen.sh
./configure
make -j 6 #-j参数可加规定多少线程同时编译
make install
-----------------------------------------------------------------------------
#附上配置的帮助信息
[root@localhost sysbench]# ./configure --help
`configure' configures sysbench 0.5 to adapt to many kinds of systems.
Usage: ./configure [OPTION]... [VAR=VALUE]...
To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE. See below for descriptions of some of the useful variables.
Defaults for the options are specified in brackets.
Configuration:
-h, --help display this help and exit
--help=short display options specific to this package
--help=recursive display the short help of all the included packages
-V, --version display version information and exit
-q, --quiet, --silent do not print `checking ...' messages
--cache-file=FILE cache test results in FILE [disabled]
-C, --config-cache alias for `--cache-file=config.cache'
-n, --no-create do not create output files
--srcdir=DIR find the sources in DIR [configure dir or `..']
Installation directories:
--prefix=PREFIX install architecture-independent files in PREFIX
[/usr/local]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
[PREFIX]
By default, `make install' will install all the files in
`/usr/local/bin', `/usr/local/lib' etc. You can specify
an installation prefix other than `/usr/local' using `--prefix',
for instance `--prefix=$HOME'.
For better control, use the options below.
Fine tuning of the installation directories:
--bindir=DIR user executables [EPREFIX/bin]
--sbindir=DIR system admin executables [EPREFIX/sbin]
--libexecdir=DIR program executables [EPREFIX/libexec]
--sysconfdir=DIR read-only single-machine data [PREFIX/etc]
--sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]
--localstatedir=DIR modifiable single-machine data [PREFIX/var]
--libdir=DIR object code libraries [EPREFIX/lib]
--includedir=DIR C header files [PREFIX/include]
--oldincludedir=DIR C header files for non-gcc [/usr/include]
--datarootdir=DIR read-only arch.-independent data root [PREFIX/share]
--datadir=DIR read-only architecture-independent data [DATAROOTDIR]
--infodir=DIR info documentation [DATAROOTDIR/info]
--localedir=DIR locale-dependent data [DATAROOTDIR/locale]
--mandir=DIR man documentation [DATAROOTDIR/man]
--docdir=DIR documentation root [DATAROOTDIR/doc/sysbench]
--htmldir=DIR html documentation [DOCDIR]
--dvidir=DIR dvi documentation [DOCDIR]
--pdfdir=DIR pdf documentation [DOCDIR]
--psdir=DIR ps documentation [DOCDIR]
Program names:
--program-prefix=PREFIX prepend PREFIX to installed program names
--program-suffix=SUFFIX append SUFFIX to installed program names
--program-transform-name=PROGRAM run sed PROGRAM on installed program names
System types:
--build=BUILD configure for building on BUILD [guessed]
--host=HOST cross-compile to build programs to run on HOST [BUILD]
--target=TARGET configure for building compilers for TARGET [HOST]
Optional Features:
--disable-option-checking ignore unrecognized --enable/--with options
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
--enable-silent-rules less verbose build output (undo: "make V=1")
--disable-silent-rules verbose build output (undo: "make V=0")
--enable-dependency-tracking
do not reject slow dependency extractors
--disable-dependency-tracking
speeds up one-time build
--enable-shared[=PKGS] build shared libraries [default=yes]
--enable-static[=PKGS] build static libraries [default=yes]
--enable-fast-install[=PKGS]
optimize for fast installation [default=yes]
--disable-libtool-lock avoid locking (might break parallel builds)
--enable-largefile enable large files support (default is enabled)
--enable-aio enable Linux asynchronous I/O support (default is
enabled)
--disable-rpath do not hardcode runtime library paths
--disable-largefile omit support for large files
--enable-profiling Toggle profiling [default=off]
--enable-coverage Toggle coverage [default=off]
--disable-pedantic-warnings
Toggle pedanticness [default=on]
--enable-iso-pedantic-warnings
Toggle iso pedanticness [default=off]
--enable-unreachable Enable warnings about unreachable code [default=no]
--disable-fail Turn warnings into failures [default=no]
--disable-go-crazy Enables extra little warnings that might be too much
[default=on]
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
--with-pic[=PKGS] try to use only PIC/non-PIC objects [default=use
both]
--with-gnu-ld assume the C compiler uses GNU ld [default=no]
--with-sysroot=DIR Search for dependent libraries within DIR
(or the compiler's sysroot if not specified).
--with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib
--without-lib-prefix don't search for libraries in includedir and libdir
--with-extra-ldflags additional linker flags, e.g. -all-static
--with-mysql compile with MySQL support (default is enabled)
--with-drizzle compile with Drizzle support (default is enabled)
--with-attachsql compile with libattachsql support (default is
enabled)
--with-oracle compile with Oracle support (default is disabled)
--with-pgsql compile with PostgreSQL support (default is
disabled)
--with-lua Compile with Lua scripting support (default is
enabled)
--with-mysql-includes path to MySQL header files
--with-mysql-libs path to MySQL libraries
--with-gnu-ld assume the C compiler uses GNU ld default=no
--with-libdrizzle-prefix[=DIR] search for libdrizzle in DIR/include and DIR/lib
--without-libdrizzle-prefix don't search for libdrizzle in includedir and libdir
--with-libattachsql-prefix[=DIR] search for libattachsql in DIR/include and DIR/lib
--without-libattachsql-prefix don't search for libattachsql in includedir and libdir
--with-pgsql-includes path to PostgreSQL header files
--with-pgsql-libs path to PostgreSQL libraries
--with-debug Add debug code/turns off optimizations (yes|no)
[default=no]
Some influential environment variables:
CC C compiler command
CFLAGS C compiler flags
LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a
nonstandard directory <lib dir>
LIBS libraries to pass to the linker, e.g. -l<library>
CPPFLAGS (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
you have headers in a nonstandard directory <include dir>
CPP C preprocessor
Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.
Report bugs to <sysbench-developers@lists.launchpad.net>.
--------------------------------------------------------------------------------
3.Oracle数据库相关操作
#配置扩展源
wget -O /etc/yum.repos.d/epel.repo http://mirrors.aliyun.com/repo/epel-7.repo
#配置oracle数据库源
wget -O /etc/yum.repos.d/Oracle.repo http://public-yum.oracle.com/public-yum-ol7.repo
#安装依赖包
yum install -y oracle-database-preinstall-19c
#安装数据库，需上传rpm
rpm -ivh oracle-database-ee-19c*.rpm
#配置，创建数据库
/etc/init.d/oracledb_ORCLCDB-19c configure
注：RPM安装默认的数据文件路径是/opt/oracle/oradata目录，确保空间充足
#切换用户
su -oracle
#添加环境变量
cat >> ~/.bashrc << EOF
export ORACLE_BASE=/opt/oracle
export ORACLE_HOME=/opt/oracle/product/19c/dbhome_1
export ORACLE_SID=ORCLCDB
export PATH=$ORACLE_HOME/bin:$PATH:$HOME/.local/bin:$HOME/bin
EOF
source /home/oracle/.bash_profile
#测试
sqlplus / as sysdba
#创建用户
CREATE USER c##sysbench IDENTIFIED BY 123456789;
#给用户授权
GRANT CONNECT, RESOURCE, DBA TO c##sysbench;
2.编译支持oracle的sysbench
#开启oracle支持，关闭mysql
./configure –with-oracle –libdir=/opt/oracle/product/19c/dbhome_1/lib –without-mysql
#加上oracle的动态库
make ORA_LIBS=/opt/oracle/product/19c/dbhome_1/lib/libclntsh.so
#安装
make install
#查看帮助信息中是否已经支持oracle
sysbench –help
3.使用示例
#准备
sysbench --test=oltp --db-driver=oracle --oltp_tables_count=8 --oltp-table-size=100000 --oracle-db=racdb --oracle-user=monkey --oracle-password=xxxxx prepare
#压力测试
sysbench --test=oltp --db-driver=oracle --oltp-tables-count=8 --oltp-table-size=100000 --oracle-db=racdb --oracle-user=monkey --oracle-password=xxxxx --max-time=900 --max-requests=10000000 --num-threads=40 --report-interval=10 run
#清理数据
sysbench --test=oltp --db-driver=oracle --oltp_tables_count=8 --oracle-db=racdb --oracle-user=monkey --oracle-password=xxxxx cleanup
参考资料：
Oracle 数据库 sysbench 压力测试 - 杨哥哥 - 博客园
sysbench安装及压测MySQL、Oracle_鹏老板的博客-CSDN博客_sysbench安装
sysbench对oracle进行压力测试 - monkey6 - 博客园
sysbench压测Oracle(安装与使用示例)_51CTO博客_sysbench测试oracle
MySQL性能压测工具SysBench详解（非常详细）_mysql sysbench_林凡尘coding的博客-CSDN博客
172
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
