windows下qemu的下载及安装

本文详细介绍了在Windows系统下如何下载并安装QEMU,包括选择安装语言、设定安装路径,以及添加环境变量和验证安装成功的过程。QEMU支持模拟多种系统,如x86_64、arm、riscv64和riscv32。

摘要生成于 C知道 ,由 DeepSeek-R1 满血版支持, 前往体验 >


一、windows qemu的安装包下载

window x64 qemu安装包下载地址:https://qemu.weilnetz.de/w64/
在这里插入图片描述
在页面中点击qemu安装包链接即可下载

二、windows qemu安装

1.选择语言默认英文

在这里插入图片描述

2.安装开始,选择Next

在这里插入图片描述

3.安装选项,这里可以通过打开System emulation中的下落项选择需要模拟的系统x86_64,arm,riscv64,riscv32等系统都可以支持勾选,尽量安装默认,全部勾选即可

在这里插入图片描述
在这里插入图片描述

4.设置安装路径,选择自己合适的路径即可

在这里插入图片描述

5.安装中,耐心等待即可

在这里插入图片描述

6.安装完成,点击Finish即可

在这里插入图片描述

qemu路径添加到PATH环境变量

在这里插入图片描述

qemu安装确认

打开命令行,执行如下命令

./qemu-system-arm.exe -version

在这里插入图片描述
显示结果如图即为安装成功,可以正常使用qemu

Qemu 1.0.1 Windows QEMU emulator version 1.0.1, Copyright (c) 2003-2008 Fabrice Bellard usage: qemu [options] [disk_image] 'disk_image' is a raw hard disk image for IDE hard disk 0 Standard options: -h or -help display this help and exit -version display version information and exit -machine [type=]name[,prop[=value][,...]] selects emulated machine (-machine ? for list) property accel=accel1[:accel2[:...]] selects accelerator supported accelerators are kvm, xen, tcg (default: tcg) -cpu cpu select CPU (-cpu ? for list) -smp n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets] set the number of CPUs to 'n' [default=1] maxcpus= maximum number of total cpus, including offline CPUs for hotplug, etc cores= number of CPU cores on one socket threads= number of threads on one CPU core sockets= number of discrete sockets in the system -numa node[,mem=size][,cpus=cpu[-cpu]][,nodeid=node] -fda/-fdb file use 'file' as floppy disk 0/1 image -hda/-hdb file use 'file' as IDE hard disk 0/1 image -hdc/-hdd file use 'file' as IDE hard disk 2/3 image -cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master) -drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i] [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off] [,cache=writethrough|writeback|none|directsync|unsafe][,format=f] [,serial=s][,addr=A][,id=name][,aio=threads|native] [,readonly=on|off] use 'file' as a drive image -set group.id.arg=value set parameter for item of type i.e. -set drive.$id.file=/path/to/image -global driver.property=value set a global default for a driver property -mtdblock file use 'file' as on-board Flash memory image -sd file use 'file' as SecureDigital card image -pflash file use 'file'
评论 10
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值