1. cloc简介
cloc是一款用于统计源码信息行数的工具，可以针对许多编程语言中源代码的空白行、注释行和物理行进行计数。给定两个版本的代码库，cloc 可以计算空白行、注释行和源代码行的差异。它完全用 Perl 编写，不依赖于 Perl v5.6 及更高版本的标准发行版（来自一些外部模块的代码嵌入在 cloc 中），因此非常可移植。众所周知，cloc 可在多种 Linux、FreeBSD、NetBSD、OpenBSD、macOS、AIX、HP-UX、Solaris、IRIX、z/OS 和 Windows 上运行。（要在 Windows 上运行 cloc 的 Perl 源版本，需要 ActiveState Perl 5.6.1或更高版本、Strawberry Perl、适用于 Linux 的 Windows 子系统、 Cygwin、 MobaXTerm安装 Perl 插件，或 mingw 环境和终端，例如 Git for Windows提供的。或者，可以使用PAR::Packer生成的 cloc 的 Windows 二进制文件在既没有 Perl 也没有 Cygwin 的 Windows 计算机上运行。）
cloc包含来自 David Wheeler 的 SLOCCount、 Damian Conway和 Abigail 的 Perl 模块 Regexp::Common、 Sean M. Burke的 Perl 模块 Win32::Autoglob和 Tye McQueen 的 Perl模块Algorithm::Diff的代码。语言比例因子来自 Mayes Consulting, LLC 网站 http://softwareestimator.com/IndustryData2.htm。
2. 下载并安装cloc
2.1. 通过包管理器安装
根据您的操作系统，其中一种安装方法可能适合您（Windows的最后两个条目除外，都需要 Perl解释器）：
npm install -g cloc # https://www.npmjs.com/package/cloc
sudo apt install cloc # Debian, Ubuntu
sudo yum install cloc # Red Hat, Fedora
sudo dnf install cloc # Fedora 22 or later
sudo pacman -S cloc # Arch
sudo emerge -av dev-util/cloc # Gentoo https://packages.gentoo.org/packages/dev-util/cloc
sudo apk add cloc # Alpine Linux
doas pkg_add cloc # OpenBSD
sudo pkg install cloc # FreeBSD
sudo port install cloc # macOS with MacPorts
brew install cloc # macOS with Homebrew
choco install cloc # Windows with Chocolatey
scoop install cloc # Windows with Scoop
[注]：如果您在使用上述软件包之一的 cloc 中遇到错误，请在提交问题报告之前尝试从 GitHub 上的最新稳定版本中提取的 cloc。
2.2. 在Github下载稳定发布版本
在包管理器安装失败或者安装后出现问题无法使用，可以直接在Github上下载源码编译或者直接下载编译好的稳定发布版本。
Github链接: https://github.com/AlDanial/cloc/releases/latest
3. cloc的基本使用方法
本文只介绍cloc工具的最基本和常用的使用方法，即统计源码行数功能。
测试环境为Windows11。
[注]：如果不是通过包管理器安装的cloc工具，则需要将exe文件拷贝到源码目录下使用
PS E:\Code\stressapptest-master\src> .\cloc-1.64.exe ./
31 text files.
31 unique files.
4 files ignored.
http://cloc.sourceforge.net v 1.64 T=0.17 s (165.0 files/s, 72687.8 lines/s)
-------------------------------------------------------------------------------
Language files blank comment code
-------------------------------------------------------------------------------
C++ 13 1253 1464 6380
C/C++ Header 13 546 922 1593
C 1 21 47 72
make 1 4 0 30
-------------------------------------------------------------------------------
SUM: 28 1824 2433 8075
-------------------------------------------------------------------------------
测试环境为Ubuntu20.04
imaginemiracle@: cloc perl-5.22.0.tar.gz
5605 text files.
5386 unique files.
2176 files ignored.
https://github.com/AlDanial/cloc v 1.65 T=25.49 s (134.7 files/s, 51980.3 lines/s)
-----------------------------------------------------------------------------------
Language files blank comment code
-----------------------------------------------------------------------------------
Perl 2892 136396 184362 536445
C 130 24676 33684 155648
C/C++ Header 148 9766 16569 147858
Bourne Shell 112 4044 6796 42668
Pascal 8 458 1603 8592
XML 33 142 0 2410
YAML 49 20 15 2078
C++ 10 313 277 2033
make 4 426 488 1986
Prolog 12 438 2 1146
JSON 14 1 0 1037
yacc 1 85 76 998
Windows Message File 1 102 11 489
DOS Batch 14 92 41 389
Windows Resource File 3 10 0 85
D 1 5 7 8
Lisp 2 0 3 4
-----------------------------------------------------------------------------------
SUM: 3434 176974 243934 903874
-----------------------------------------------------------------------------------
4. 附
下面附上cloc工具的--help输出，仅供参考使用。
imaginemiracle@: cloc --help
Usage: cloc [options] <file(s)/dir(s)/git hash(es)> | <set 1> <set 2> | <report files>
Count, or compute differences of, physical lines of source code in the
given files (may be archives such as compressed tarballs or zip files,
or git commit hashes or branch names) and/or recursively below the
given directories.
Input Options
--extract-with=<cmd> This option is only needed if cloc is unable
to figure out how to extract the contents of
the input file(s) by itself.
Use <cmd> to extract binary archive files (e.g.:
.tar.gz, .zip, .Z). Use the literal '>FILE<' as
a stand-in for the actual file(s) to be
extracted. For example, to count lines of code
in the input files
gcc-4.2.tar.gz perl-5.8.8.tar.gz
on Unix use
--extract-with='gzip -dc >FILE< | tar xf -'
or, if you have GNU tar,
--extract-with='tar zxf >FILE<'
and on Windows use, for example:
--extract-with="\"c:\Program Files\WinZip\WinZip32.exe\" -e -o >FILE< ."
(if WinZip is installed there).
--list-file=<file> Take the list of file and/or directory names to
process from <file>, which has one file/directory
name per line. Only exact matches are counted;
relative path names will be resolved starting from
the directory where cloc is invoked. Set <file>
to - to read file names from a STDIN pipe.
See also --exclude-list-file.
--diff-list-file=<file> Take the pairs of file names to be diff'ed from
<file>, whose format matches the output of
--diff-alignment. (Run with that option to
see a sample.) The language identifier at the
end of each line is ignored. This enables --diff
mode and bypasses file pair alignment logic.
--vcs=<VCS> Invoke a system call to <VCS> to obtain a list of
files to work on. If <VCS> is 'git', then will
invoke 'git ls-files' to get a file list and
'git submodule status' to get a list of submodules
whose contents will be ignored. See also --git
which accepts git commit hashes and branch names.
If <VCS> is 'svn' then will invoke 'svn list -R'.
The primary benefit is that cloc will then skip
files explicitly excluded by the versioning tool
in question, ie, those in .gitignore or have the
svn:ignore property.
Alternatively <VCS> may be any system command
that generates a list of files.
Note: cloc must be in a directory which can read
the files as they are returned by <VCS>. cloc will
not download files from remote repositories.
'svn list -R' may refer to a remote repository
to obtain file names (and therefore may require
authentication to the remote repository), but
the files themselves must be local.
Setting <VCS> to 'auto' selects between 'git'
and 'svn' (or neither) depending on the presence
of a .git or .svn subdirectory below the directory
where cloc is invoked.
--unicode Check binary files to see if they contain Unicode
expanded ASCII text. This causes performance to
drop noticeably.
Processing Options
--autoconf Count .in files (as processed by GNU autoconf) of
recognized languages. See also --no-autogen.
--by-file Report results for every source file encountered.
--by-file-by-lang Report results for every source file encountered
in addition to reporting by language.
--config <file> Read command line switches from <file> instead of
the default location of /home/al/.config/cloc/options.txt.
The file should contain one switch, along with
arguments (if any), per line. Blank lines and lines
beginning with '#' are skipped. Options given on
the command line take priority over entries read from
the file.
--count-and-diff <set1> <set2>
First perform direct code counts of source file(s)
of <set1> and <set2> separately, then perform a diff
of these. Inputs may be pairs of files, directories,
or archives. If --out or --report-file is given,
three output files will be created, one for each
of the two counts and one for the diff. See also
--diff, --diff-alignment, --diff-timeout,
--ignore-case, --ignore-whitespace.
--diff <set1> <set2> Compute differences in code and comments between
source file(s) of <set1> and <set2>. The inputs
may be any mix of files, directories, archives,
or git commit hashes. Use --diff-alignment to
generate a list showing which file pairs where
compared. When comparing git branches, only files
which have changed in either commit are compared.
See also --git, --count-and-diff, --diff-alignment,
--diff-list-file, --diff-timeout, --ignore-case,
--ignore-whitespace.
--diff-timeout <N> Ignore files which take more than <N> seconds
to process. Default is 10 seconds. Setting <N>
to 0 allows unlimited time. (Large files with many
repeated lines can cause Algorithm::Diff::sdiff()
to take hours.) See also --timeout.
--docstring-as-code cloc considers docstrings to be comments, but this is
not always correct as docstrings represent regular
strings when they appear on the right hand side of an
assignment or as function arguments. This switch
forces docstrings to be counted as code.
--follow-links [Unix only] Follow symbolic links to directories
(sym links to files are always followed).
See also --stat.
--force-lang=<lang>[,<ext>]
Process all files that have a <ext> extension
with the counter for language <lang>. For
example, to count all .f files with the
Fortran 90 counter (which expects files to
end with .f90) instead of the default Fortran 77
counter, use
--force-lang="Fortran 90",f
If <ext> is omitted, every file will be counted
with the <lang> counter. This option can be
specified multiple times (but that is only
useful when <ext> is given each time).
See also --script-lang, --lang-no-ext.
--force-lang-def=<file> Load language processing filters from <file>,
then use these filters instead of the built-in
filters. Note: languages which map to the same
file extension (for example:
MATLAB/Mathematica/Objective-C/MUMPS/Mercury;
Pascal/PHP; Lisp/OpenCL; Lisp/Julia; Perl/Prolog)
will be ignored as these require additional
processing that is not expressed in language
definition files. Use --read-lang-def to define
new language filters without replacing built-in
filters (see also --write-lang-def,
--write-lang-def-incl-dup).
--git Forces the inputs to be interpreted as git targets
(commit hashes, branch names, et cetera) if these
are not first identified as file or directory
names. This option overrides the --vcs=git logic
if this is given; in other words, --git gets its
list of files to work on directly from git using
the hash or branch name rather than from
'git ls-files'. This option can be used with
--diff to perform line count diffs between git
commits, or between a git commit and a file,
directory, or archive. Use -v/--verbose to see
the git system commands cloc issues.
--git-diff-rel Same as --git --diff, or just --diff if the inputs
are recognized as git targets. Only files which
have changed in either commit are compared.
--git-diff-all Git diff strategy #2: compare all files in the
repository between the two commits.
--ignore-whitespace Ignore horizontal white space when comparing files
with --diff. See also --ignore-case.
--ignore-case Ignore changes in case within file contents;
consider upper- and lowercase letters equivalent
when comparing files with --diff. See also
--ignore-whitespace.
--ignore-case-ext Ignore case of file name extensions. This will
cause problems counting some languages
(specifically, .c and .C are associated with C and
C++; this switch would count .C files as C rather
than C++ on *nix operating systems). File name
case insensitivity is always true on Windows.
--lang-no-ext=<lang> Count files without extensions using the <lang>
counter. This option overrides internal logic
for files without extensions (where such files
are checked against known scripting languages
by examining the first line for #!). See also
--force-lang, --script-lang.
--max-file-size=<MB> Skip files larger than <MB> megabytes when
traversing directories. By default, <MB>=100.
cloc's memory requirement is roughly twenty times
larger than the largest file so running with
files larger than 100 MB on a computer with less
than 2 GB of memory will cause problems.
Note: this check does not apply to files
explicitly passed as command line arguments.
--no-autogen[=list] Ignore files generated by code-production systems
such as GNU autoconf. To see a list of these files
(then exit), run with --no-autogen list
See also --autoconf.
--original-dir [Only effective in combination with
--strip-comments] Write the stripped files
to the same directory as the original files.
--read-binary-files Process binary files in addition to text files.
This is usually a bad idea and should only be
attempted with text files that have embedded
binary data.
--read-lang-def=<file> Load new language processing filters from <file>
and merge them with those already known to cloc.
If <file> defines a language cloc already knows
about, cloc's definition will take precedence.
Use --force-lang-def to over-ride cloc's
definitions (see also --write-lang-def,
--write-lang-def-incl-dup).
--script-lang=<lang>,<s> Process all files that invoke <s> as a #!
scripting language with the counter for language
<lang>. For example, files that begin with
#!/usr/local/bin/perl5.8.8
will be counted with the Perl counter by using
--script-lang=Perl,perl5.8.8
The language name is case insensitive but the
name of the script language executable, <s>,
must have the right case. This option can be
specified multiple times. See also --force-lang,
--lang-no-ext.
--sdir=<dir> Use <dir> as the scratch directory instead of
letting File::Temp chose the location. Files
written to this location are not removed at
the end of the run (as they are with File::Temp).
--skip-uniqueness Skip the file uniqueness check. This will give
a performance boost at the expense of counting
files with identical contents multiple times
(if such duplicates exist).
--stat Some file systems (AFS, CD-ROM, FAT, HPFS, SMB)
do not have directory 'nlink' counts that match
the number of its subdirectories. Consequently
cloc may undercount or completely skip the
contents of such file systems. This switch forces
File::Find to stat directories to obtain the
correct count. File search speed will decrease.
See also --follow-links.
--stdin-name=<file> Give a file name to use to determine the language
for standard input. (Use - as the input name to
receive source code via STDIN.)
--strip-comments=<ext> For each file processed, write to the current
directory a version of the file which has blank
and commented lines removed (in-line comments
persist). The name of each stripped file is the
original file name with .<ext> appended to it.
It is written to the current directory unless
--original-dir is on.
--strip-str-comments Replace comment markers embedded in strings with
'xx'. This attempts to work around a limitation
in Regexp::Common::Comment where comment markers
embedded in strings are seen as actual comment
markers and not strings, often resulting in a
'Complex regular subexpression recursion limit'
warning and incorrect counts. There are two
disadvantages to using this switch: 1/code count
performance drops, and 2/code generated with
--strip-comments will contain different strings
where ever embedded comments are found.
--sum-reports Input arguments are report files previously
created with the --report-file option in plain
format (eg. not JSON, YAML, XML, or SQL).
Makes a cumulative set of results containing the
sum of data from the individual report files.
--timeout <N> Ignore files which take more than <N> seconds
to process at any of the language's filter stages.
The default maximum number of seconds spent on a
filter stage is the number of lines in the file
divided by one thousand. Setting <N> to 0 allows
unlimited time. See also --diff-timeout.
--processes=NUM [Available only on systems with a recent version
of the Parallel::ForkManager module. Not
available on Windows.] Sets the maximum number of
cores that cloc uses. The default value of 0
disables multiprocessing.
--unix Override the operating system autodetection
logic and run in UNIX mode. See also
--windows, --show-os.
--use-sloccount If SLOCCount is installed, use its compiled
executables c_count, java_count, pascal_count,
php_count, and xml_count instead of cloc's
counters. SLOCCount's compiled counters are
substantially faster than cloc's and may give
a performance improvement when counting projects
with large files. However, these cloc-specific
features will not be available: --diff,
--count-and-diff, --strip-comments, --unicode.
--windows Override the operating system autodetection
logic and run in Microsoft Windows mode.
See also --unix, --show-os.
Filter Options
--exclude-content=<regex> Exclude files containing text that matches the given
regular expression.
--exclude-dir=<D1>[,D2,] Exclude the given comma separated directories
D1, D2, D3, et cetera, from being scanned. For
example --exclude-dir=.cache,test will skip
all files and subdirectories that have /.cache/
or /test/ as their parent directory.
Directories named .bzr, .cvs, .hg, .git, .svn,
and .snapshot are always excluded.
This option only works with individual directory
names so including file path separators is not
allowed. Use --fullpath and --not-match-d=<regex>
to supply a regex matching multiple subdirectories.
--exclude-ext=<ext1>[,<ext2>[...]]
Do not count files having the given file name
extensions.
--exclude-lang=<L1>[,L2[...]]
Exclude the given comma separated languages
L1, L2, L3, et cetera, from being counted.
--exclude-list-file=<file> Ignore files and/or directories whose names
appear in <file>. <file> should have one file
name per line. Only exact matches are ignored;
relative path names will be resolved starting from
the directory where cloc is invoked.
See also --list-file.
--fullpath Modifies the behavior of --match-f, --not-match-f,
and --not-match-d to include the file's path
in the regex, not just the file's basename.
(This does not expand each file to include its
absolute path, instead it uses as much of
the path as is passed in to cloc.)
Note: --match-d always looks at the full
path and therefore is unaffected by --fullpath.
--include-ext=<ext1>[,ext2[...]]
Count only languages having the given comma
separated file extensions. Use --show-ext to
see the recognized extensions.
--include-lang=<L1>[,L2[...]]
Count only the given comma separated languages
L1, L2, L3, et cetera. Use --show-lang to see
the list of recognized languages.
--match-d=<regex> Only count files in directories matching the Perl
regex. For example
--match-d='/(src|include)/'
only counts files in directories containing
/src/ or /include/. Unlike --not-match-d,
--match-f, and --not-match-f, --match-d always
compares the fully qualified path against the
regex.
--not-match-d=<regex> Count all files except those in directories
matching the Perl regex. Only the trailing
directory name is compared, for example, when
counting in /usr/local/lib, only 'lib' is
compared to the regex.
Add --fullpath to compare parent directories to
the regex.
Do not include file path separators at the
beginning or end of the regex.
--match-f=<regex> Only count files whose basenames match the Perl
regex. For example
--match-f='^[Ww]idget'
only counts files that start with Widget or widget.
Add --fullpath to include parent directories
in the regex instead of just the basename.
--not-match-f=<regex> Count all files except those whose basenames
match the Perl regex. Add --fullpath to include
parent directories in the regex instead of just
the basename.
--skip-archive=<regex> Ignore files that end with the given Perl regular
expression. For example, if given
--skip-archive='(zip|tar(.(gz|Z|bz2|xz|7z))?)'
the code will skip files that end with .zip,
.tar, .tar.gz, .tar.Z, .tar.bz2, .tar.xz, and
.tar.7z.
--skip-win-hidden On Windows, ignore hidden files.
Debug Options
--categorized=<file> Save names of categorized files to <file>.
--counted=<file> Save names of processed source files to <file>.
--diff-alignment=<file> Write to <file> a list of files and file pairs
showing which files were added, removed, and/or
compared during a run with --diff. This switch
forces the --diff mode on.
--explain=<lang> Print the filters used to remove comments for
language <lang> and exit. In some cases the
filters refer to Perl subroutines rather than
regular expressions. An examination of the
source code may be needed for further explanation.
--help Print this usage information and exit.
--found=<file> Save names of every file found to <file>.
--ignored=<file> Save names of ignored files and the reason they
were ignored to <file>.
--print-filter-stages Print processed source code before and after
each filter is applied.
--show-ext[=<ext>] Print information about all known (or just the
given) file extensions and exit.
--show-lang[=<lang>] Print information about all known (or just the
given) languages and exit.
--show-os Print the value of the operating system mode
and exit. See also --unix, --windows.
-v[=<n>] Verbose switch (optional numeric value).
-verbose[=<n>] Long form of -v.
--version Print the version of this program and exit.
--write-lang-def=<file> Writes to <file> the language processing filters
then exits. Useful as a first step to creating
custom language definitions. Note: languages which
map to the same file extension will be excluded.
(See also --force-lang-def, --read-lang-def).
--write-lang-def-incl-dup=<file>
Same as --write-lang-def, but includes duplicated
extensions. This generates a problematic language
definition file because cloc will refuse to use
it until duplicates are removed.
Output Options
--3 Print third-generation language output.
(This option can cause report summation to fail
if some reports were produced with this option
while others were produced without it.)
--by-percent X Instead of comment and blank line counts, show
these values as percentages based on the value
of X in the denominator:
X = 'c' -> # lines of code
X = 'cm' -> # lines of code + comments
X = 'cb' -> # lines of code + blanks
X = 'cmb' -> # lines of code + comments + blanks
For example, if using method 'c' and your code
has twice as many lines of comments as lines
of code, the value in the comment column will
be 200%. The code column remains a line count.
--csv Write the results as comma separated values.
--csv-delimiter=<C> Use the character <C> as the delimiter for comma
separated files instead of ,. This switch forces --csv to be on.
--file-encoding=<E> Write output files using the <E> encoding instead of
the default ASCII (<E> = 'UTF-7'). Examples: 'UTF-16',
'euc-kr', 'iso-8859-16'. Known encodings can be
printed with
perl -MEncode -e 'print join("\n", Encode->encodings(":all")), "\n"'
--hide-rate Do not show line and file processing rates in the
output header. This makes output deterministic.
--json Write the results as JavaScript Object Notation
(JSON) formatted output.
--md Write the results as Markdown-formatted text.
--out=<file> Synonym for --report-file=<file>.
--progress-rate=<n> Show progress update after every <n> files are
processed (default <n>=100). Set <n> to 0 to
suppress progress output (useful when redirecting
output to STDOUT).
--quiet Suppress all information messages except for
the final report.
--report-file=<file> Write the results to <file> instead of STDOUT.
--sql=<file> Write results as SQL create and insert statements
which can be read by a database program such as
SQLite. If <file> is -, output is sent to STDOUT.
--sql-append Append SQL insert statements to the file specified
by --sql and do not generate table creation
statements. Only valid with the --sql option.
--sql-project=<name> Use <name> as the project identifier for the
current run. Only valid with the --sql option.
--sql-style=<style> Write SQL statements in the given style instead
of the default SQLite format. Styles include
'Oracle' and 'Named_Columns'.
--sum-one For plain text reports, show the SUM: output line
even if only one input file is processed.
--xml Write the results in XML.
--xsl=<file> Reference <file> as an XSL stylesheet within
the XML output. If <file> is 1 (numeric one),
writes a default stylesheet, cloc.xsl (or
cloc-diff.xsl if --diff is also given).
This switch forces --xml on.
--yaml Write the results in YAML.
扫一扫
1320
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
