新手小白最近才开始学GAMIT,在进行基线解算的时候前后遇到各种问题,记录下报错和解决办法,如果有人遇到同样的问题也能少走点弯路。
前期准备工作结束后,work目录下终端输入sh_gamit -expt work -s 2020 349 350
完整报错提示如下:
FATAL :230526:0038:55.0 NGSTOT/lib/svnav_read: Failed to find SV in ECCENTRICITY SINEX block (Name svnav.dat)
STOP FATAL Error: Stop from report_stat
sh_sp3fit: Creating initial ARC input file
grep: gigs21361.sp3: No such file or directory
ARC models: EGM08 BERNE 900.0 75.00 GPST INERTIAL J2000 IAU76 NONE NONE
FATAL :230526:0038:55.0 ARC/arc: GAMIT.fatal exists: ARC not executed
STOP FATAL Error: Stop from report_stat
GAMIT.fatal exists, stop in sh_sp3fit
mv: cannot stat 'gigsg0.349': No such file or directory
sh_sp3fit failed to generate a g-file, stop
/home/xw/Pictures/Screenshot from 2023-05-26 09-30-12.png
又根据网上查到的解决办法从ftp://garner.ucsd.edu/pub/gamit目录下又更新了tables中的svnav.dat、antmod.dat等一系列所需的表文件(明明之前已经更成最新的了),重复操作后依然报同样的错,考虑到可能是10.7版本对新的svnav.dat格式不兼容,于是将旧版svnav.dat.gnss文件替换成svnav.dat,重复先前步骤,报新的错误。
WARNING:230526:1615:38.0 ARC/filopn: Error could not open ocean tide table otides.dat ERROR 2
WARNING:230526:1615:38.0 ARC/check_gmodels: Requested radiation-pressure model (BERNE) differs from g-file (SPHRC) (Name gigs21361.sp3)
WARNING:230526:1615:38.0 ARC/check_gmodels: Use requested model, set RAD(1)=1.0, others = 0.0
STATUS :230526:1615:38.0 ARC/lib/ephred: Opened planetary ephemeris file (Name nbody)
STATUS :230526:1615:39.0 ARC/arc: Integrating satellite 1 G 1 63 IIF PRN 1
Gravity CSnm for SETIDE Coefficients (normalized Max N 2- 4
SETIDE C/S 2 0 NaNE-11
SETIDE C/S 2 1 NaNE-11 NaNE-11
SETIDE C/S 2 2 NaNE-11 NaNE-11
SETIDE C/S 3 0 NaNE-11
SETIDE C/S 3 1 NaNE-11 NaNE-11
SETIDE C/S 3 2 NaNE-11 NaNE-11
SETIDE C/S 3 3 NaNE-11 NaNE-11
SETIDE C/S 4 0 NaNE-11
SETIDE C/S 4 1 NaNE-11 NaNE-11
SETIDE C/S 4 2 NaNE-11 NaNE-11
SETIDE C/S 4 3 0.0000E-11 0.0000E-11
SETIDE C/S 4 4 0.0000E-11 0.0000E-11
NoPole tide: F
xpole xpm m1 ypole ypm m2 4.1731379824927161E-007 8.8755009372959712E-007 -9.6993198377601689E-002 1.4178732265117528E-006 1.6760797791950130E-006 5.3258924560943333E-002
SE pole-tide dC21 dS21 1.2847550075328608E-010 -7.2481003674266914E-011
C21, S21 w/ pole tide normalized NaN NaN
STATUS :230526:1615:39.0 ARC/ertorb: Antenna power for BLOCK IIF = 0.00 watts
FATAL :230526:1615:39.0 ARC/eval: Interval to minimum, something wrong with ICs or model
Note: The following floating-point exceptions are signalling: IEEE_INVALID_FLAG IEEE_DIVIDE_BY_ZERO
STOP FATAL Error: Stop from report_stat
GAMIT.fatal exists, stop in sh_sp3fit
mv: cannot stat 'gigsg0.349': No such file or directory
sh_sp3fit failed to generate a g-file, stop
/home/xw/Pictures/Screenshot from 2023-05-26 16-28-36.png
继续搜寻解决办法发现可能是版本兼容性问题,通过查询发现装的并不是10.70版本,而是10.63。更新10.71后上述问题解决。