R1配置
#
ipv6 //全局开启ipv6
#
interface GigabitEthernet0/0/0
ipv6 enable //接口开启ipv6
ipv6 address FE80::1 link-local//手工配置ipv6link-local地址
#
interface LoopBack0
ipv6 enable
ipv6 address 2001::1/128
#
ospfv3 1//ospfv3进程1
router-id 1.1.1.1//ospfv3需要手工指定route-id否则不能建立邻居关系
#
interface GigabitEthernet0/0/0
ospfv3 1 area 0.0.0.0 instance 1//ospfv3需要在接口下配置ospf,指定为instance1,不能通过network方式引入。
#
interface LoopBack0
ospfv3 1 area 0.0.0.0 instance 1
R2配置
#
ipv6
interface GigabitEthernet0/0/0
ipv6 enable
ipv6 address FE80::2 link-local
#
interface LoopBack0
ipv6 enable
ipv6 address 2001::2/128
#
ospfv3 1
router-id 2.2.2.2
#
interface GigabitEthernet0/0/0
ospfv3 1 area 0.0.0.0 instance 2
#
interface LoopBack0
ospfv3 1 area 0.0.0.0 instance 2
R3配置
#
ipv6
#
interface GigabitEthernet0/0/0
ipv6 enable
ipv6 address FE80::3 link-local
#
interface LoopBack0
ipv6 enable
ipv6 address 2001::3/128
#
ospfv3 1//ospf进程1
router-id 3.3.3.3
#
ospfv3 2//ospf进程2
router-id 33.33.33.33//为了避免混淆,不同进程下route-id应该不同,但是配置相同不影响其建立邻居关系
#
interface GigabitEthernet0/0/0//分别将其配置在不同进程下的ospfv3中
ospfv3 1 area 0.0.0.0 instance 1
ospfv3 2 area 0.0.0.0 instance 2
#
interface LoopBack0
ospfv3 1 area 0.0.0.0 instance 1
ospfv3 2 area 0.0.0.0 instance 2
查看R3ospfv3邻居关系
<r3>dis ospfv3 peer
OSPFv3 Process (1)
OSPFv3 Area (0.0.0.0)
Neighbor ID Pri State Dead Time Interface Instance ID
1.1.1.1 1 Full/DR 00:00:38 GE0/0/0 1
OSPFv3 Process (2)
OSPFv3 Area (0.0.0.0)
Neighbor ID Pri State Dead Time Interface Instance ID
2.2.2.2 1 Full/DR 00:00:32 GE0/0/0 2
对R3的OSPFV3报文进行抓包分析
<<ospfv3hello报文抓包.pcap>>