树的概述
树是一种非常常用的数据结构,树与前面介绍的线性表,栈,队列等线性结构不同,树是一种非线性结构
1.树的定义和基本术语
计算机世界里的树,是从自然界中实际的树抽象而来的,它指的是N个有父子关系的节点的有限集合。对于这个有限的节点集合而言,它满足如下条件:
- 当N=0时,改节点集合为空,这课树也被称为空树
- 在任意的非空树中,有且仅有一个根(root)节点
- 当N>1时,除根节点以外的其余节点可分为M个互为相交的有限集合T1,T2,...,Tm,其中的每个集合本身又是一棵树,并称其为根的子树(subtree)。
从上面定义可以发现树的递归特性:一棵树由根和若干棵子树组成,而每棵子树又由若干棵更小的子树组成。
树中任一节点可以有0或多个子节点,但只能有一个父节点。根节点是一个特例,根节点没有父节点,叶子节点没有子节点。树中每个节点既可以是其上一级节点的子节点,也可以是下一级节点的父节点,因此同一个节点既可以是父节点,也可以是子节点(类似于一个人—————他既是他儿子的父亲,又是他父亲的儿子)。
很显然,父子关系是一种非线性关系,所以树结构是非线性结构。
如果按节点是否包含子节点来分,节点可以分成以下两种:
- 普通节点:包含子节点的节点
- 叶子节点:没有子节点的节点,因此叶子节点不可作为父节点
如果按节点是否具有唯一的父节点来分,节点有可分为如下两种:
- 根节点:没有父节点的节点,根节点不可作为子节点
- 普通节点:具有唯一父节点的节点
一棵树只能有一个根节点,如果一棵树有了多个根节点,那么它已经不再是一棵树了,而是多棵树的集合,有时也被称为森林。示意图如下:
与树有关的术语有如下一些:
- 节点:树的最基本组成单元,通常包括一个数据元素及若干指针用于指向其他节点。
- 节点的度:节点拥有的子树的个数被称为节点的度(degree)
如上图:左边根节点的度:3,右边根节点的度:1
- 树的度:树中所有节点的度的最大值就是该树的度
如上图:左边树的度:3,右边树的度:3
- 叶子节点:度为0的节点被称为叶子节点或终端节点
- 分支节点:度不为0的节点被称为分支节点或非终端节点
- 子节点,父节点,兄弟节点:节点的子树的根被称为该节点的子节点,而该节点称为子节点的父节点(parent).具有相同父节点的子节点之间互称为兄弟节点。
- 节点的层次(level):节点的层次从根开始算起,根的层次值为1,其余节点的层次值为父节点层次值加1。
- 树的深度(depth):树中节点的最大层次值称为树的深度或高度。
- 有序树与无序树:如果将树中节点的各棵子树看成从左到右是有序的(即不能互换),则称该树为有序树,否则称为无序树。
- 祖先节点(ancestor):从根到该节点所经分支上的所有节点
- 后代节点(descendant):以某节点为根的子树中任一节点都称为该节点的后代节点。
- 森林(forest):森林是;两颗或两颗以上互不相交的树的集合,删去一棵树的根,就得到一个森林。
2.二叉树几个重要性质
1. 在二叉树的第i(i>=1)层最多有2^(i - 1)个结点。
2. 深度为k(k>=0)的二叉树最少有k个结点,最多有2^k-1个结点。
3. 对于任一棵非空二叉树,若其叶结点数为n0,度为2的非叶结点数为n2,则n0 = n2 +1。
4. 具有n个结点的完全二叉树的深度为int_UP(log(2,n+1))。
5. 如果将一棵有n个结点的完全二叉树自顶向下,同一层自左向右连续给结点编号1,2,3,......,n,然后按此结点编号将树中各结点顺序的存放于一个一维数组,并简称编号为i的结点为结点i( i>=1 && i<=n),则有以下关系:
(1)若 i= 1,则结点i为根,无父结点;若 i> 1,则结点 i 的父结点为结点int_DOWN(i / 2);
(2)若 2*i <= n,则结点 i 的左子女为结点 2*i;
(3)若2*i<=n,则结点i的右子女为结点2*i+1;
(4)若结点编号i为奇数,且i!=1,它处于右兄弟位置,则它的左兄弟为结点i-1;
(5)若结点编号i为偶数,且i!=n,它处于左兄弟位置,则它的右兄弟为结点i+1;
(6)结点i所在的层次为 int_DOWN(log(2,i))+1
在二叉树的遍历中存在三种较为常用的遍历方式:前序遍历、中序遍历、后序遍历
前序遍历
中序遍历
后序遍历
二叉树的数据结构:
class TreeNode{
int val;
//左孩子
TreeNode left;
//右孩子
TreeNode right;
}
1.求二叉树的最大深度
int maxDeath(TreeNode node){
if(node==null){
return 0;
}
int left = maxDeath(node.left);
int right = maxDeath(node.right);
return Math.max(left,right) + 1;
}
2.求二叉树的最小深度
int getMinDepth(TreeNode root){
if(root == null){
return 0;
}
return getMin(root);
}
int getMin(TreeNode root){
if(root == null){
return Integer.MAX_VALUE;
}
if(root.left == null&&root.right == null){
return 1;
}
return Math.min(getMin(root.left),getMin(root.right)) + 1;
}
3,求二叉树中节点的个数
int numOfTreeNode(TreeNode root){
if(root == null){
return 0;
}
int left = numOfTreeNode(root.left);
int right = numOfTreeNode(root.right);
return left + right + 1;
}
4,求二叉树中叶子节点的个数
int numsOfNoChildNode(TreeNode root){
if(root == null){
return 0;
}
if(root.left==null&&root.right==null){
return 1;
}
return numsOfNodeTreeNode(root.left)+numsOfNodeTreeNode(root.right);
}
5.求二叉树中第k层节点的个数
int numsOfkLevelTreeNode(TreeNode root,int k){
if(root == null||k<1){
return 0;
}
if(k==1){
return 1;
}
int numsLeft = numsOfkLevelTreeNode(root.left,k-1);
int numsRight = numsOfkLevelTreeNode(root.right,k-1);
return numsLeft + numsRight;
}
6.判断二叉树是否是平衡二叉树
boolean isBalanced(TreeNode node){
return maxDeath2(node)!=-1;
}
int maxDeath2(TreeNode node){
if(node == null){
return 0;
}
int left = maxDeath2(node.left);
int right = maxDeath2(node.right);
if(left==-1||right==-1||Math.abs(left-right)>1){
return -1;
}
return Math.max(left, right) + 1;
}
7.判断二叉树是否是完全二叉树
什么是完全二叉树呢?参见
boolean isCompleteTreeNode(TreeNode root){
if(root == null){
return false;
}
Queue<TreeNode> queue = new LinkedList<TreeNode>();
queue.add(root);
boolean result = true;
boolean hasNoChild = false;
while(!queue.isEmpty()){
TreeNode current = queue.remove();
if(hasNoChild){
if(current.left!=null||current.right!=null){
result = false;
break;
}
}else{
if(current.left!=null&¤t.right!=null){
queue.add(current.left);
queue.add(current.right);
}else if(current.left!=null&¤t.right==null){
queue.add(current.left);
hasNoChild = true;
}else if(current.left==null&¤t.right!=null){
result = false;
break;
}else{
hasNoChild = true;
}
}
}
return result;
}
8.两个二叉树是否完全相同
boolean isSameTreeNode(TreeNode t1,TreeNode t2){
if(t1==null&&t2==null){
return true;
}
else if(t1==null||t2==null){
return false;
}
if(t1.val != t2.val){
return false;
}
boolean left = isSameTreeNode(t1.left,t2.left);
boolean right = isSameTreeNode(t1.right,t2.right);
return left&&right;
}
9.两个二叉树是否互为镜像
boolean isMirror(TreeNode t1,TreeNode t2){
if(t1==null&&t2==null){
return true;
}
if(t1==null||t2==null){
return false;
}
if(t1.val != t2.val){
return false;
}
return isMirror(t1.left,t2.right)&&isMirror(t1.right,t2.left);
}
10.翻转二叉树or镜像二叉树
TreeNode mirrorTreeNode(TreeNode root){
if(root == null){
return null;
}
TreeNode left = mirrorTreeNode(root.left);
TreeNode right = mirrorTreeNode(root.right);
root.left = right;
root.right = left;
return root;
}
11.求两个二叉树的最低公共祖先节点
TreeNode getLastCommonParent(TreeNode root,TreeNode t1,TreeNode t2){
if(findNode(root.left,t1)){
if(findNode(root.right,t2)){
return root;
}else{
return getLastCommonParent(root.left,t1,t2);
}
}else{
if(findNode(root.left,t2)){
return root;
}else{
return getLastCommonParent(root.right,t1,t2)
}
}
}
// 查找节点node是否在当前 二叉树中
boolean findNode(TreeNode root,TreeNode node){
if(root == null || node == null){
return false;
}
if(root == node){
return true;
}
boolean found = findNode(root.left,node);
if(!found){
found = findNode(root.right,node);
}
return found;
}
12.二叉树的前序遍历
迭代解法
ArrayList<Integer> preOrder(TreeNode root){
Stack<TreeNode> stack = new Stack<TreeNode>();
ArrayList<Integer> list = new ArrayList<Integer>();
if(root == null){
return list;
}
stack.push(root);
while(!stack.empty()){
TreeNode node = stack.pop();
list.add(node.val);
if(node.right!=null){
stack.push(node.right);
}
if(node.left != null){
stack.push(node.left);
}
}
return list;
}
递归解法
ArrayList<Integer> preOrderReverse(TreeNode root){
ArrayList<Integer> result = new ArrayList<Integer>();
preOrder2(root,result);
return result;
}
void preOrder2(TreeNode root,ArrayList<Integer> result){
if(root == null){
return;
}
result.add(root.val);
preOrder2(root.left,result);
preOrder2(root.right,result);
}
13.二叉树的中序遍历
ArrayList<Integer> inOrder(TreeNode root){
ArrayList<Integer> list = new ArrayList<<Integer>();
Stack<TreeNode> stack = new Stack<TreeNode>();
TreeNode current = root;
while(current != null|| !stack.empty()){
while(current != null){
stack.add(current);
current = current.left;
}
current = stack.peek();
stack.pop();
list.add(current.val);
current = current.right;
}
return list;
}
14.二叉树的后序遍历
ArrayList<Integer> postOrder(TreeNode root){
ArrayList<Integer> list = new ArrayList<Integer>();
if(root == null){
return list;
}
list.addAll(postOrder(root.left));
list.addAll(postOrder(root.right));
list.add(root.val);
return list;
}
15.前序遍历和后序遍历构造二叉树
TreeNode buildTreeNode(int[] preorder,int[] inorder){
if(preorder.length!=inorder.length){
return null;
}
return myBuildTree(inorder,0,inorder.length-1,preorder,0,preorder.length-1);
}
TreeNode myBuildTree(int[] inorder,int instart,int inend,int[] preorder,int prestart,int preend){
if(instart>inend){
return null;
}
TreeNode root = new TreeNode(preorder[prestart]);
int position = findPosition(inorder,instart,inend,preorder[start]);
root.left = myBuildTree(inorder,instart,position-1,preorder,prestart+1,prestart+position-instart);
root.right = myBuildTree(inorder,position+1,inend,preorder,position-inend+preend+1,preend);
return root;
}
int findPosition(int[] arr,int start,int end,int key){
int i;
for(i = start;i<=end;i++){
if(arr[i] == key){
return i;
}
}
return -1;
}
16.在二叉树中插入节点
TreeNode insertNode(TreeNode root,TreeNode node){
if(root == node){
return node;
}
TreeNode tmp = new TreeNode();
tmp = root;
TreeNode last = null;
while(tmp!=null){
last = tmp;
if(tmp.val>node.val){
tmp = tmp.left;
}else{
tmp = tmp.right;
}
}
if(last!=null){
if(last.val>node.val){
last.left = node;
}else{
last.right = node;
}
}
return root;
}
17.输入一个二叉树和一个整数,打印出二叉树中节点值的和等于输入整数所有的路径
void findPath(TreeNode r,int i){
if(root == null){
return;
}
Stack<Integer> stack = new Stack<Integer>();
int currentSum = 0;
findPath(r, i, stack, currentSum);
}
void findPath(TreeNode r,int i,Stack<Integer> stack,int currentSum){
currentSum+=r.val;
stack.push(r.val);
if(r.left==null&&r.right==null){
if(currentSum==i){
for(int path:stack){
System.out.println(path);
}
}
}
if(r.left!=null){
findPath(r.left, i, stack, currentSum);
}
if(r.right!=null){
findPath(r.right, i, stack, currentSum);
}
stack.pop();
}
18.二叉树的搜索区间
给定两个值 k1 和 k2(k1 < k2)和一个二叉查找树的根节点。找到树中所有值在 k1 到 k2 范围内的节点。即打印所有x (k1 <= x <= k2) 其中 x 是二叉查找树的中的节点值。返回所有升序的节点值。
ArrayList<Integer> result;
ArrayList<Integer> searchRange(TreeNode root,int k1,int k2){
result = new ArrayList<Integer>();
searchHelper(root,k1,k2);
return result;
}
void searchHelper(TreeNode root,int k1,int k2){
if(root == null){
return;
}
if(root.val>k1){
searchHelper(root.left,k1,k2);
}
if(root.val>=k1&&root.val<=k2){
result.add(root.val);
}
if(root.val<k2){
searchHelper(root.right,k1,k2);
}
}
19.二叉树的层次遍历
ArrayList<ArrayList<Integer>> levelOrder(TreeNode root){
ArrayList<ArrayList<Integer>> result = new ArrayList<ArrayList<Integer>>();
if(root == null){
return result;
}
Queue<TreeNode> queue = new LinkedList<TreeNode>();
queue.offer(root);
while(!queue.isEmpty()){
int size = queue.size();
ArrayList<<Integer> level = new ArrayList<Integer>():
for(int i = 0;i < size ;i++){
TreeNode node = queue.poll();
level.add(node.val);
if(node.left != null){
queue.offer(node.left);
}
if(node.right != null){
queue.offer(node.right);
}
}
result.add(Level);
}
return result;
}
20.二叉树内两个节点的最长距离
二叉树中两个节点的最长距离可能有三种情况:
1.左子树的最大深度+右子树的最大深度为二叉树的最长距离
2.左子树中的最长距离即为二叉树的最长距离
3.右子树种的最长距离即为二叉树的最长距离
因此,递归求解即可
private static class Result{
int maxDistance;
int maxDepth;
public Result() {
}
public Result(int maxDistance, int maxDepth) {
this.maxDistance = maxDistance;
this.maxDepth = maxDepth;
}
}
int getMaxDistance(TreeNode root){
return getMaxDistanceResult(root).maxDistance;
}
Result getMaxDistanceResult(TreeNode root){
if(root == null){
Result empty = new Result(0,-1);
return empty;
}
Result lmd = getMaxDistanceResult(root.left);
Result rmd = getMaxDistanceResult(root.right);
Result result = new Result();
result.maxDepth = Math.max(lmd.maxDepth,rmd.maxDepth) + 1;
result.maxDistance = Math.max(lmd.maxDepth + rmd.maxDepth,Math.max(lmd.maxDistance,rmd.maxDistance));
return result;
}
21.不同的二叉树
给出 n,问由 1...n 为节点组成的不同的二叉查找树有多少种?
int numTrees(int n ){
int[] counts = new int[n+2];
counts[0] = 1;
counts[1] = 1;
for(int i = 2;i<=n;i++){
for(int j = 0;j<i;j++){
counts[i] += counts[j] * counts[i-j-1];
}
}
return counts[n];
}
22.判断二叉树是否是合法的二叉查找树(BST)
一棵BST定义为:
节点的左子树中的值要严格小于该节点的值。
节点的右子树中的值要严格大于该节点的值。
左右子树也必须是二叉查找树。
一个节点的树也是二叉查找树。
public int lastVal = Integer.MAX_VALUE;
public boolean firstNode = true;
public boolean isValidBST(TreeNode root) {
// write your code here
if(root==null){
return true;
}
if(!isValidBST(root.left)){
return false;
}
if(!firstNode&&lastVal >= root.val){
return false;
}
firstNode = false;
lastVal = root.val;
if (!isValidBST(root.right)) {
return false;
}
return true;
}