解决：CentOS 7使用ifconfig命令看不到ens33的信息

解决：CentOS 7使用ifconfig命令看不到ens33的信息

原因：系统默认启用了NetworkManager。
解决方案：关闭NetworkManager。

 #1.停止NetworkManager
 systemctl stop NetworkManager
 #2.启用ens33
 ifup ens33
 #3.重启网络
 systemctl restart network.service
 #4.永久关闭NetworkManager
 systemctl disable NetworkManager

问题解决，此时可以查看ip等信息。

[root@localhost ~]# ifconfig
ens33: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
       inet 192.168.179.128  netmask 255.255.255.0  broadcast 192.168.179.255
       inet6 fe80::20c:29ff:fe98:e39c  prefixlen 64  scopeid 0x20<link>
       ether 00:0c:29:98:e3:9c  txqueuelen 1000  (Ethernet)
       RX packets 43262  bytes 51657368 (49.2 MiB)
       RX errors 0  dropped 0  overruns 0  frame 0
       TX packets 10442  bytes 3839231 (3.6 MiB)
       TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
       inet 127.0.0.1  netmask 255.0.0.0
       inet6 ::1  prefixlen 128  scopeid 0x10<host>
       loop  txqueuelen 1000  (Local Loopback)
       RX packets 3155  bytes 184799 (180.4 KiB)
       RX errors 0  dropped 0  overruns 0  frame 0
       TX packets 3155  bytes 184799 (180.4 KiB)
       TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0