lvs配置脚本

ipvsadm 安装包在系统盘里

1、LVS-NAT模式配置脚本

#!/bin/bash
# director 服务器上开启路由转发功能
echo 1 > /proc/sys/net/ipv4/ip_forward
echo 0 > /proc/sys/net/ipv4/conf/all/send_redirects
echo 0 > /proc/sys/net/ipv4/conf/default/send_redirects
echo 0 > /proc/sys/net/ipv4/conf/eth0/send_redirects
echo 0 > /proc/sys/net/ipv4/conf/eth1/send_redirects

iptables -t nat -F
iptables -t nat -X
iptables -t nat -A POSTROUTING -s 192.168.0.0/24 -o eth1 -j MASQUERADE

ipv='/sbin/ipvsadm'
vip=192.168.2.100
rs1=192.168.0.103
rs2=192.168.0.104

$ipv-C
$ipv -A -t $vip:80 -s rr -p 20
$ipv -a -t $vip:80 -r $rs1:80 -m
$ipv -a -t $vip:80 -r $rs2:80 -m




2、LVS-DR模式配置脚本


1)Director
#!/bin/bash
echo 1 > /proc/sys/net/ipv4/ip_forward
ipv=/sbin/ipvsadm
vip=192.168.2.100
rs1=192.168.2.101
rs2=192.168.2.102
rs3=192.168.2.103
ifconfig eth0:0 $vip broadcast $vip netmask 255.255.255.255 up
route add -host $vip dev eth0:0
$ipv -C
$ipv -A -t $vip:80 -s rr -p 20
$ipv -a -t $vip:80 -r $rs1:80 -g
$ipv -a -t $vip:80 -r $rs2:80 -g
$ipv -a -t $vip:80 -r $rs3:80 -g


2)Realserver
#!/bin/bash
vip=192.168.2.100
ifconfig lo:0 $vip broadcast $vip netmask 255.255.255.255 up
route add -host $vip lo:0
echo "1" > /proc/sys/net/ipv4/conf/lo/arp_ignore
echo "2" > /proc/sys/net/ipv4/conf/lo/arp_announce
echo "1" > /proc/sys/net/ipv4/conf/all/arp_ignore
echo "2" > /proc/sys/net/ipv4/conf/all/arp_announce
sysctl -p