void TestDelay(uint32 delay); void TestDelay(uint32 delay) { static volatile uint32 DelayTimer = 0; while (DelayTimer<delay) { DelayTimer++; } DelayTimer=0; } extern void CAN2_ORED_0_31_MB_IRQHandler(void); #if 1 // #include "Can_Ipw.h" #define MSG_ID 20u #define RX_MB_IDX 1U #define TX_MB_IDX 0U volatile int exit_code = 0; extern Flexcan_Ip_StateType Can_Ipw_xStatus0; /* User includes / uint8 dummyData[8] = {1,2,3,4,5,6,7}; /! \brief The main function for the project. \details The startup initialization sequence is the following: * - startup asm routine * - main() / //extern const Clock_Ip_ClockConfigType Clock_Ip_aClockConfig[1]; extern void CAN0_ORED_0_31_MB_IRQHandler(void); int main(void) { uint8 u8TimeOut = 100U; CanIf_bTxFlag = FALSE; CanIf_bRxFlag = FALSE; / Initialize the Mcu driver / #if (MCU_PRECOMPILE_SUPPORT == STD_ON) Mcu_Init(NULL_PTR); #elif (MCU_PRECOMPILE_SUPPORT == STD_OFF) Mcu_Init(&Mcu_Config); / Initialize the clock tree and apply PLL as system clock / Mcu_InitClock(McuClockSettingConfig_0); while ( MCU_PLL_LOCKED != Mcu_GetPllStatus() ) { / Busy wait until the System PLL is locked / } #endif / (MCU_PRECOMPILE_SUPPORT == STD_ON) / / Write your code here / Mcu_DistributePllClock(); Mcu_SetMode(McuModeSettingConf_0); / Initialize Platform driver */ Platform_Init(NULL_PTR); Port_Init(&Port_Config); Spi_Init(&Spi_Config); #if 1 // CanTrcv_TJA1145_Init(); uint8 SWK_WUF_Detection = 0u; uint8 tempRegVal = 0u; /SBC mode StandBy/ /SBC_SetMode(CANTRCV_TRCVMODE_STANDBY);/ /Disable wakepin/ Sbc_Reg_Write(CanTrcv_Tja1145_Wpe, 0x00, FALSE); /Set Lock control register/ Sbc_Reg_Write(CanTrcv_Tja1145_Lc, 0x00, FALSE); /Can baudrate config/ Sbc_Reg_Write(CanTrcv_Tja1145_Dr, CANTRCV_TJA1145_CAN_DATA_RATE, FALSE); /Set CAN control register/ Sbc_Reg_Write(CanTrcv_Tja1145_Cc, 0x31, FALSE); Sbc_Reg_Read(CanTrcv_Tja1145_Ts, &tempRegVal); Sbc_Reg_Read(CanTrcv_Tja1145_Tes, &SWK_WUF_Detection); Sbc_Reg_Write(CanTrcv_Tja1145_Mc, CanTrcv_Tja1145_Mc_MC_Normal, FALSE); Sbc_Reg_Write(CanTrcv_Tja1145_Cc,CanTrcv_Tja1145_Cc_CMC_Active,FALSE); #endif // Clock_Ip_Init(&Clock_Ip_aClockConfig[0]); volatile Flexcan_Ip_StatusType result = 1; volatile Flexcan_Ip_StatusType result1 = 1; IntCtrl_Ip_EnableIrq(FlexCAN0_1_IRQn); IntCtrl_Ip_InstallHandler(FlexCAN0_1_IRQn, CAN0_ORED_0_31_MB_IRQHandler, NULL_PTR); // Dio_WriteChannel(DioConf_DioChannel_DioChannel_O_S_STB_CAN3_M, STD_LOW);//CAN3 STB Flexcan_Ip_DataInfoType rx_info = { .msg_id_type = FLEXCAN_MSG_ID_STD, .data_length = 8u, .is_polling = TRUE, .is_remote = FALSE }; Flexcan_Ip_MsgBuffType rxData; FlexCAN_Ip_Init(CanController_0, &Can_Ipw_xStatus0, &Flexcan_aCtrlConfigPB[0U]);// while (1) { if(rx_compli==1) { FlexCAN_Ip_SetStartMode(CanController_0); FlexCAN_Ip_ConfigRxMb(CanController_0, RX_MB_IDX, &rx_info, MSG_ID); // rx_info.is_polling = FALSE; FlexCAN_Ip_Send(CanController_0, TX_MB_IDX, &rx_info, MSG_ID, (uint8 *)&dummyData); FlexCAN_Ip_Receive(CanController_0, RX_MB_IDX, &rxData, TRUE); while(FlexCAN_Ip_GetTransferStatus(CanController_0, RX_MB_IDX)
最新发布
5万+
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
