hda-verb参数详表

hda-verb参数详表
hda-verb的由来
hda-verb是linux下面的alsa-project的一条命令，它的作用是发送HD-audio命令。

命令格式：
linux:
% hda-verb /dev/snd/hwC0D0 0x12 0x701 2
Mac:
$ hda-verb 0x12 0x701 2
输入命令：

hda-verb

输出信息：

hda-verb for CodecCommander (based on alsa-tools hda-verb)
   usage: hda-verb [option] hwdep-device nid verb param
   -l      List known verbs and parameters
   -L      List known verbs and parameters (one per line)

参数 -------------------------- 数值
GET_STREAM_FORMAT 0x0a00
GET_AMP_GAIN_MUTE 0x0b00
GET_PROC_COEF 0x0c00
GET_COEF_INDEX 0x0d00
PARAMETERS 0x0f00
GET_CONNECT_SEL 0x0f01
GET_CONNECT_LIST 0x0f02
GET_PROC_STATE 0x0f03
GET_SDI_SELECT 0x0f04
GET_POWER_STATE 0x0f05
GET_CONV 0x0f06
GET_PIN_WIDGET_CONTROL 0x0f07
GET_UNSOLICITED_RESPONSE 0x0f08
GET_PIN_SENSE 0x0f09
GET_BEEP_CONTROL 0x0f0a
GET_EAPD_BTLENABLE 0x0f0c
GET_DIGI_CONVERT_1 0x0f0d
GET_DIGI_CONVERT_2 0x0f0e
GET_VOLUME_KNOB_CONTROL 0x0f0f
GET_GPIO_DATA 0x0f15
GET_GPIO_MASK 0x0f16
GET_GPIO_DIRECTION 0x0f17
GET_GPIO_WAKE_MASK 0x0f18
GET_GPIO_UNSOLICITED_RSP_MASK 0x0f19
GET_GPIO_STICKY_MASK 0x0f1a
GET_CONFIG_DEFAULT 0x0f1c
GET_SUBSYSTEM_ID 0x0f20
SET_STREAM_FORMAT 0x200
SET_AMP_GAIN_MUTE 0x300
SET_PROC_COEF 0x400
SET_COEF_INDEX 0x500
SET_CONNECT_SEL 0x701
SET_PROC_STATE 0x703
SET_SDI_SELECT 0x704
SET_POWER_STATE 0x705
SET_CHANNEL_STREAMID 0x706
SET_PIN_WIDGET_CONTROL 0x707
SET_UNSOLICITED_ENABLE 0x708
SET_PIN_SENSE 0x709
SET_BEEP_CONTROL 0x70a
SET_EAPD_BTLENABLE 0x70c
SET_DIGI_CONVERT_1 0x70d
SET_DIGI_CONVERT_2 0x70e
SET_VOLUME_KNOB_CONTROL 0x70f
SET_GPIO_DATA 0x715
SET_GPIO_MASK 0x716
SET_GPIO_DIRECTION 0x717
SET_GPIO_WAKE_MASK 0x718
SET_GPIO_UNSOLICITED_RSP_MASK 0x719
SET_GPIO_STICKY_MASK 0x71a
SET_CONFIG_DEFAULT_BYTES_0 0x71c
SET_CONFIG_DEFAULT_BYTES_1 0x71d
SET_CONFIG_DEFAULT_BYTES_2 0x71e
SET_CONFIG_DEFAULT_BYTES_3 0x71f
SET_CODEC_RESET 0x7ff

已知参数：
参数 数值
VENDOR_ID 0x00
SUBSYSTEM_ID 0x01
REV_ID 0x02
NODE_COUNT 0x04
FUNCTION_TYPE 0x05
AUDIO_FG_CAP 0x08
AUDIO_WIDGET_CAP 0x09
PCM 0x0a
STREAM 0x0b
PIN_CAP 0x0c
AMP_IN_CAP 0x0d
CONNLIST_LEN 0x0e
POWER_STATE 0x0f
PROC_CAP 0x10
GPIO_CAP 0x11
AMP_OUT_CAP 0x12
VOL_KNB_CAP 0x13

例子：
设置节点0x19参数为SET_PIN_WIDGET_CONTROL，值为0x24

$ hda-verb 0x19 SET_PIN_WIDGET_CONTROL 0x24

nid = 0x19, verb = 0x707, param = 0x24
command 0x01970724 --> result = 0x00000000
也可以写成：

$ hda-verb 0x19 0x707 0x24

nid = 0x19, verb = 0x707, param = 0x24
command 0x01970724 --> result = 0x00000000
CodecCommander经常使用的命令：

$ hda-verb 0x19 SET_PIN_WIDGET_CONTROL 0x25
$ hda-verb 0x21 SET_UNSOLICITED_ENABLE 0x83

备注：
字符串不区分大小写
此外，它不一定是完整的字符串，但只能是唯一的
例如 par和PARAMETER的参数是相同的
set_a就足以代替SET_AMP_GAIN_MUTE