redis数据迁移之redis-shake

原redis库：10.10.12.41  端口 6379
迁移目标库：10.10.12.42 端口6380

wget https://github.com/alibaba/RedisShake/releases/download/release-v2.0.2-20200506/redis-shake-v2.0.2.tar.gz

1、下载redis-shake
wget https://github.com/alibaba/RedisShake/releases/download/release-v2.0.2-20200506/redis-shake-v2.0.2.tar.gz

2、解压 
tar -zxvf redis-shake-v2.0.2.tar.gz 

3、修改配置文件
更改配置文件redis-shake.conf

vi redis-shake.conf

修改日志存储位置
# log file，日志文件，不配置将打印到stdout (e.g. /var/log/redis-shake.log )
log.file =/opt/shake/logs/redis-shake.log

 配置原redis库

source.address = 10.10.12.41:6379

密码没有为空 有则填写

source.password_raw =

# source redis configuration.
# used in `dump`, `sync` and `rump`.
# source redis type, e.g. "standalone" (default), "sentinel" or "cluster".
#   1. "standalone": standalone db mode.
#   2. "sentinel": the redis address is read from sentinel.
#   3. "cluster": the source redis has several db.
#   4. "proxy": the proxy address, currently, only used in "rump" mode.
# 源端redis的类型，支持standalone，sentinel，cluster和proxy四种模式，注意：目前proxy只用于rump模式。
source.type = standalone
# ip:port
# the source address can be the following:
#   1. single db address. for "standalone" type.
#   2. ${sentinel_master_name}:${master or slave}@sentinel single/cluster address, e.g., mymaster:master@127.0.0.1:26379;127.0.0.1:26380, or @127.0.0.1:26379;127.0.0.1:26380. for "sentinel" type.
#   3. cluster that has several db nodes split by semicolon(;). for "cluster" type. e.g., 10.1.1.1:20331;10.1.1.2:20441.
#   4. proxy address(used in "rump" mode only). for "proxy" type.
# 源redis地址。对于sentinel或者开源cluster模式，输入格式为"master名字:拉取角色为master或者slave@sentinel的地址"，别的cluster
# 架构，比如codis, twemproxy, aliyun proxy等需要配置所有master或者slave的db地址。
source.address = 10.10.12.41:6379
# password of db/proxy. even if type is sentinel.
source.password_raw =
# auth type, don't modify it
source.auth_type = auth
# tls enable, true or false. Currently, only support standalone.
# open source redis does NOT support tls so far, but some cloud versions do.
source.tls_enable = false
# input RDB file.
# used in `decode` and `restore`.
# if the input is list split by semicolon(;), redis-shake will restore the list one by one.
# 如果是decode或者restore，这个参数表示读取的rdb文件。支持输入列表，例如：rdb.0;rdb.1;rdb.2
# redis-shake将会挨个进行恢复。
source.rdb.input = local
# the concurrence of RDB syncing, default is len(source.address) or len(source.rdb.input).
# used in `dump`, `sync` and `restore`. 0 means default.
# This is useless when source.type isn't cluster or only input is only one RDB.
# 拉取的并发度，如果是`dump`或者`sync`，默认是source.address中db的个数，`restore`模式默认len(source.rdb.input)。
# 假如db节点/输入的rdb有5个，但rdb.parallel=3，那么一次只会
# 并发拉取3个db的全量数据，直到某个db的rdb拉取完毕并进入增量，才会拉取第4个db节点的rdb，
# 以此类推，最后会有len(source.address)或者len(rdb.input)个增量线程同时存在。
source.rdb.parallel = 0
# for special cloud vendor: ucloud
# used in `decode` and `restore`.
# ucloud集群版的rdb文件添加了slot前缀，进行特判剥离: ucloud_cluster。
source.rdb.special_cloud =

迁移目标库配置

 配置原redis库

source.address = 10.10.12.42:6380

密码没有为空 有则填写

source.password_raw =

# 当源目的有重复key，是否进行覆写
# rewrite表示源端覆盖目的端。
# none表示一旦发生进程直接退出。
# ignore表示保留目的端key，忽略源端的同步key。该值在rump模式下没有用。

#默认none   

#该值在rump模式下没有用。
key_exists = rewrite   

# target redis configuration. used in `restore`, `sync` and `rump`.
# the type of target redis can be "standalone", "proxy" or "cluster".
#   1. "standalone": standalone db mode.
#   2. "sentinel": the redis address is read from sentinel.
#   3. "cluster": open source cluster (not supported currently).
#   4. "proxy": proxy layer ahead redis. Data will be inserted in a round-robin way if more than 1 proxy given.
# 目的redis的类型，支持standalone，sentinel，cluster和proxy四种模式。
target.type = standalone
# ip:port
# the target address can be the following:
#   1. single db address. for "standalone" type.
#   2. ${sentinel_master_name}:${master or slave}@sentinel single/cluster address, e.g., mymaster:master@127.0.0.1:26379;127.0.0.1:26380, or @127.0.0.1:26379;127.0.0.1:26380. for "sentinel" type.
#   3. cluster that has several db nodes split by semicolon(;). for "cluster" type.
#   4. proxy address. for "proxy" type.
target.address = 10.10.12.42:6380
# password of db/proxy. even if type is sentinel.
target.password_raw =
# auth type, don't modify it
target.auth_type = auth
# all the data will be written into this db. < 0 means disable.
target.db = -1
# tls enable, true or false. Currently, only support standalone.
# open source redis does NOT support tls so far, but some cloud versions do.
target.tls_enable = false
# output RDB file prefix.
# used in `decode` and `dump`.
# 如果是decode或者dump，这个参数表示输出的rdb前缀，比如输入有3个db，那么dump分别是:
# ${output_rdb}.0, ${output_rdb}.1, ${output_rdb}.2
target.rdb.output = local_dump
# some redis proxy like twemproxy doesn't support to fetch version, so please set it here.
# e.g., target.version = 4.0
target.version =

# use for expire key, set the time gap when source and target timestamp are not the same.
# 用于处理过期的键值，当迁移两端不一致的时候，目的端需要加上这个值
fake_time =

# how to solve when destination restore has the same key.
# rewrite: overwrite.
# none: panic directly.
# ignore: skip this key. not used in rump mode.
# used in `restore`, `sync` and `rump`.
# 当源目的有重复key，是否进行覆写
# rewrite表示源端覆盖目的端。
# none表示一旦发生进程直接退出。
# ignore表示保留目的端key，忽略源端的同步key。该值在rump模式下没有用。
key_exists = rewrite

最后执行

./start.sh redis-shake.conf sync

最后看10.10.12.42库数据是否迁移过来了