求C++編寫圖檔代碼

要編寫如上圖所示一個圖檔，在網上找到的資料都是錯誤，不知道我的這個寫的對不對，幫我看一下唄，我的代碼如下：

#include <windows.h>
#include <iostream>
#include <fstream>
#include <tchar.h>
#include "malloc.h"

FILE* fp;

int width;
int height;
int lineByte;
const void*imgBuf;
void CMFCWDlg::OnBnClickedWraw()
{
// TODO: 在此添加控件通知处理程序代码
//读图像的位图数据、宽、高、颜色表及每像素位数等数据进内存，存放在相应的全局变量中
//void readBmp(char*bmpName);
int readBmp(char* bmpName)
{
FILE *fp = fopen(bmpName, "rb");//二进制读方式打开指定的图像文件
if (fp == 0) return 0;
//跳过位图文件头结构BITMAPFILEHEADER
fseek(fp, sizeof(BITMAPFILEHEADER), 0);
//定义位图信息头结构变量，读取位图信息头进内存，存放在变量head中
BITMAPINFOHEADER head;
fread(&head, sizeof(BITMAPINFOHEADER), 1, fp); //获取图像宽、高、每像素所占位数等信息
bmpWidth = head.biWidth;
bmpHeight = head.biHeight;
biBitCount = head.biBitCount;//定义变量，计算图像每行像素所占的字节数（必须是4的倍数）
int lineByte = (bmpWidth * biBitCount / 8 + 3) / 4 * 4;//灰度图像有颜色表，且颜色表表项为256
//申请颜色表所需要的空间，读颜色表进内存
pColorTable = new RGBQUAD[2];
fread(pColorTable, sizeof(RGBQUAD), 2, fp);
//申请位图数据所需要的空间，读位图数据进内存
pBmpBuf = new unsigned char[lineByte * bmpHeight];
fread(pBmpBuf, 1, lineByte * bmpHeight, fp);
fclose(fp);//关闭文件
//return 1;//读取文件成功


}
//给定一个图像位图数据、宽、高、颜色表指针及每像素所占的位数等信息,将其写到指定文件中
bool saveBmp(char *bmpName, unsigned char *imgBuf, int width, int height,
int biBitCount, RGBQUAD *pColorTable)
{
//如果位图数据指针为0，则没有数据传入，函数返回
if (!imgBuf)
return 0;
//颜色表大小，以字节为单位，灰度图像颜色表为1024字节，彩色图像颜色表大小为0 
int colorTablesize = 0;
if (biBitCount == 1)
colorTablesize = 2;
int lineByte = (width*biBitCount / 8 + 3) / 4 * 4;
FILE* fp
fp = fopen_s(bmpName, "wb");//二進制寫的方式打開
if (fp == 0)
return 0;
BITMAPFILEHEADER fileHead;
fileHead.bfType = 0x4D42;//bmp類型
fileHead.bfSize = sizeof(BITMAPFILEHEADER) + sizeof(BITMAPINFOHEADER) + colorTablesize + lineByte * height;
fileHead.bfRserved1 = 0;
fileHead.bfRserved2 = 0;


fileHead.bfOffBits = 54 + colorTablesize;
//FILE* fp;
//写文件头进文件
fwrite(&fileHead, sizeof(BITMAPFILEHEADER), 1, fp);
//申请位图信息头结构变量，填写信息头信息
//BITMAPINFOHEADER head;
BITMAPINFOHEADER head;
head.biBitCount = biBitCount;//黑白為1
head.biClrImportant = 0;
head.biClrUsed = 0;
head.biCompression = 0;
head.biHeight = height;
head.biPlanes = 1;
head.biSize = 40;
head.biSizeImage = lineByte * height;
head.biWidth = width;
head.biXPelsPerMeter = 0;
head.biYPelsPerMeter = 0;
fwrite(&head, sizeof(BITMAPINFOHEADER), 1, fp);
if (biBitCount == 8)
fwrite(pColorTable, sizeof(RGBQUAD), 256, fp);
fwrite(imgBuf, height*lineByte, 1, fp);
fclose(fp);
//return 1;


}
//以下为像素的读取函数  
//int doIt()
void main()
{

//读入指定BMP文件进内存 

char readPath[] = "nv.BMP";

readBmp(readPath);
//输出图像的信息  
cout << "width=" << bmpWidth << " height=" << bmpHeight << " biBitCount=" << biBitCount << endl;
//循环变量，图像的坐标  
//每行字节数  
int lineByte = (bmpWidth*biBitCount / 8 + 3) / 4 * 4;
//循环变量，针对彩色图像，遍历每像素的三个分量  
int m = 0, n = 0, count_xiang_su = 0;
//将图像左下角1/4部分置成黑色  
ofstream outfile("图像像素.txt", ios::in | ios::trunc);
if (biBitCount == 8) //对于灰度图像  
{
//------------------------------------------------------------------------------------  
//以下完成图像的分割成8*8小单元，并把像素值存储到指定文本中。由于BMP图像的像素数据是从  
//左下角：由左往右，由上往下逐行扫描的  
int L1 = 0;
int hang = 8;
int lie = 0;
for (int fen_ge_hang = 0; fen_ge_hang < 3; fen_ge_hang++)//64*64矩阵行循环  
{
for (int fen_ge_lie = 0; fen_ge_lie < 3; fen_ge_lie++)//64*64列矩阵循环  
{
//--------------------------------------------  
for (L1 = hang; L1 > hang - 3; L1--)//8*8矩阵行  
{
for (int L2 = lie; L2 < lie + 3; L2++)//8*8矩阵列  
{
m = *(pBmpBuf + L1 * lineByte + L2);
outfile << m << " ";
count_xiang_su++;
if (count_xiang_su % 3 == 0)//每8*8矩阵读入文本文件  
{
outfile << endl;
}
}
}
//---------------------------------------------  
hang = 8 - fen_ge_hang * 3;//64*64矩阵行变换  
lie += 3;//64*64矩阵列变换  
//该一行（64）由8个8*8矩阵的行组成  
}
hang -= 3;//64*64矩阵的列变换  
lie = 0;//64*64juzhen  
}
}
if (!outfile)
{
cout << "open error!" << endl;
exit(1);
}
else if (biBitCount == 24)
{//彩色图像  
for (int i = 0; i < bmpHeight; i++)
{
for (int j = 0; j < bmpWidth; j++)
{
for (int k = 0; k < 3; k++)//每像素RGB三个分量分别置0才变成黑色  
{
//*(pBmpBuf+i*lineByte+j*3+k)-=40;  
m = *(pBmpBuf + i * lineByte + j * 3 + k);
outfile << m << " ";
count_xiang_su++;
if (count_xiang_su % 3 == 0)
{
outfile << endl;
}
//n++;  
}
n++;
}
}
cout << "总的像素个素为:" << n << endl;
cout << "----------------------------------------------------" << endl;
}
//将图像数据存盘 
char writePath[] = "nvcpy.BMP";//图片处理后再存储  

saveBmp(writePath, pBmpBuf, bmpWidth, bmpHeight, biBitCount, pColorTable);

//清除缓冲区，pBmpBuf和pColorTable是全局变量，在文件读入时申请的空间  

                delete[]pBmpBuf;

if (biBitCount == 8)

delete[]pColorTable;
}
}