IP 设置 DHCP Static WLAN 以太网 脚本 bat

​ PS：

1. 编码格式需要改为 ANSI；

   2. 网关、DNS服务器都要根据自己所需更改；
   3. 需要注意适配器名称是否与你电脑上一样，不一样也需要更改。

​ 脚本如下，小白，写得不好勿喷。

@echo off
:Back
echo 请选择修改的适配器：
set /p input=WIFI ：W    以太网：Y         
if "%input%"=="W" goto W
if "%input%"=="w" goto W
if "%input%"=="Y" goto Y
if "%input%"=="y" goto Y
pause 
exit

:W
echo now setting WIFI，please choose DHCP or Static，if choose error，input B go back
set /p inputWIFI=DHCP ：D    Static：S     Back：B        
if "%inputWIFI%"=="D" goto Wifi_Dhcp
if "%inputWIFI%"=="S" goto Wifi_Static 
if "%inputWIFI%"=="B" goto Back 
if "%inputWIFI%"=="d" goto Wifi_Dhcp
if "%inputWIFI%"=="s" goto Wifi_Static 
if "%inputWIFI%"=="b" goto Back 
pause 
exit

:Y
echo now setting 以太网，choose DHCP or Static，if choose error，input B go back
set /p inputEt=DHCP ：D    Static：S     Back：B         
if "%inputEt%"=="D" goto Et_Dhcp
if "%inputEt%"=="S" goto Et_Static 
if "%inputEt%"=="B" goto Back 
if "%inputEt%"=="d" goto Et_Dhcp
if "%inputEt%"=="s" goto Et_Static 
if "%inputEt%"=="b" goto Back
pause 
exit

:Wifi_Dhcp
echo Wifi_Dhcp start----------------------------setting
set AddressName=WLAN
netsh interface ip set address name=%AddressName% source=dhcp
netsh interface ip set dns name=%AddressName% source=dhcp
rem netsh interface ip delete dns "WLAN" all
ipconfig /flushdns
netsh interface ipv4 show ipaddress interface=%AddressName%
echo Wifi_Dhcp setting----------------------------done
set /p flag=exit: e    continue setting：c       
if "%flag%"=="e" goto exit
if "%flag%"=="c" goto Back
if "%flag%"=="E" goto exit
if "%flag%"=="C" goto Back
pause

:Et_Dhcp
echo Et_Dhcp start----------------------------setting
set AddressName=以太网
netsh interface ip set address name=%AddressName% source=dhcp
netsh interface ip set dns name=%AddressName% source=dhcp
rem netsh interface ip delete dns "以太网" all
ipconfig /flushdns
netsh interface ipv4 show ipaddress interface=%AddressName%
echo Et_Dhcp setting----------------------------done
set /p flag=exit: e    continue setting：c       
if "%flag%"=="e" goto exit
if "%flag%"=="c" goto Back
if "%flag%"=="E" goto exit
if "%flag%"=="C" goto Back
pause

:Wifi_Static
echo Wifi_Static start----------------------------setting
set /p input=输入想要设置的IP: 
set AddressName=WLAN
netsh interface ip set address name=%AddressName% source=static addr=%input% mask=255.255.252.0 gateway=192.168.6.1
rem netsh interface ip delete dns "WLAN" all
netsh interface ip set dns name=%AddressName% source=static addr=192.168.6.2 register=PRIMARY validate=no
netsh interface ip add dns name=%AddressName% addr=114.114.114.114 index=2 validate=no
ipconfig /flushdns
netsh interface ipv4 show ipaddress interface=%AddressName%
echo Wifi_Dhcp setting----------------------------done
set /p flag=exit: e    continue setting：c        
if "%flag%"=="e" goto exit
if "%flag%"=="c" goto Back
if "%flag%"=="E" goto exit
if "%flag%"=="C" goto Back
pause

:Et_Static 
echo Et_Static start----------------------------setting
set /p input=输入想要设置的IP: 
set AddressName=以太网
netsh interface ip set address name=%AddressName% source=static addr=%input% mask=255.255.252.0 gateway=192.168.6.1
rem netsh interface ip delete dns "以太网" all
netsh interface ip set dns name=%AddressName% source=static addr=192.168.6.2 register=PRIMARY validate=no
netsh interface ip add dns name=%AddressName% addr=114.114.114.114 index=2 validate=no
ipconfig /flushdns
netsh interface ipv4 show ipaddress interface=%AddressName%
echo Et_Static setting----------------------------done
set /p flag=exit: e    continue setting：c       
if "%flag%"=="e" goto exit
if "%flag%"=="c" goto Back
if "%flag%"=="E" goto exit
if "%flag%"=="C" goto Back
pause

:exit
exit