[IMX6ULL]移植NXP Linux Kernel 5.15

于 2024-07-21 17:05:23 发布
阅读量781 收藏 6
点赞数 5
分类专栏： 嵌入式Linux 文章标签： linux alpha nxp linux kernel 正点原子
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/qq_40731414/article/details/140590482
版权

移植NXP Linux Kernel 5.15

2024-7-7

hongxi.zhu

1. 下载NXP Linux Kernel 5.15

仓库[nxp-imx/linux-imx]

git clone -b lf-5.15.y https://github.com/nxp-imx/linux-imx.git

2. 编译NXP Linux Kernel 5.15

make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- distclean
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- imx_v7_defconfig
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- -j16

3. 烧写NXP Linux Kernel 5.15

编译生成

arch/arm/boot/dts/imx6ull-14x14-evk-emmc.dtb
arch/arm/boot/zImage

使用tftp方式下载上面两个文件到板子上（uboot移植看前面的文章）

setenv bootargs 'console=ttymxc0,115200 root=/dev/mmcblk1p2 rootwait rw'
setenv bootcmd 'tftp 80800000 zImage; tftp 83000000 imx6ull-14x14-evk-emmc.dtb; bootz 80800000 - 83000000'
saveenv
boot

4. 适配正点原子Alpha板子

4.1 新建单板配置文件

cp ./arch/arm/configs/imx_v7_defconfig ./arch/arm/configs/imx6ull_alpha_emmc_defconfig

4.2 新建单板设备树文件

cp ./arch/arm/boot/dts/imx6ull-14x14-evk-emmc.dts ./arch/arm/boot/dts/imx6ull-14x14-alpha-emmc.dts
cp ./arch/arm/boot/dts/imx6ull-14x14-evk.dts ./arch/arm/boot/dts/imx6ull-14x14-alpha.dts
cp ./arch/arm/boot/dts/imx6ul-14x14-evk.dtsi ./arch/arm/boot/dts/imx6ul-14x14-alpha.dtsi
  • 修改imx6ull-14x14-alpha.dts
/dts-v1/;

#include "imx6ull.dtsi"
#include "imx6ul-14x14-alpha.dtsi"

/ {
	model = "Freescale i.MX6 ULL 14x14 EVK Board";
	compatible = "fsl,imx6ull-14x14-evk", "fsl,imx6ull";
};
...
  • 修改imx6ull-14x14-alpha-emmc.dts
#include "imx6ull-14x14-alpha.dts"

&usdhc2 {
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&pinctrl_usdhc2_8bit>;
	pinctrl-1 = <&pinctrl_usdhc2_8bit_100mhz>;
	pinctrl-2 = <&pinctrl_usdhc2_8bit_200mhz>;
	bus-width = <8>;
	non-removable;
	status = "okay";
};
  • 修改dts目录下的Makefile, 添加imx6ull-14x14-alpha-emmc.dts
	...
	imx6ull-14x14-evk.dtb \
	imx6ull-14x14-evk-emmc.dtb \
	imx6ull-14x14-alpha-emmc.dtb \
	imx6ull-14x14-evk-btwifi.dtb \
	imx6ull-14x14-evk-btwifi-sdio3_0.dtb \
	imx6ull-14x14-evk-gpmi-weim.dtb \
	...

4.3 编译

make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- distclean
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- imx6ull_alpha_emmc_defconfig
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- -j16

4.4 烧录

修改uboot中tftp配置

setenv bootargs 'console=ttymxc0,115200 root=/dev/mmcblk1p2 rootwait rw'
setenv bootcmd 'tftp 80800000 zImage; tftp 83000000 imx6ull-14x14-alpha-emmc.dtb; bootz 80800000 - 83000000'
saveenv
boot

正常引导效果：

=> setenv bootcmd 'tftp 80800000 zImage; tftp 83000000 imx6ull-14x14-alpha-emmc.dtb; bootz 80800000 - 83000000'
=> saveenv
Saving Environment to MMC... Writing to MMC(0)... OK
=>
=>
=> boot
ethernet@20b4000 Waiting for PHY auto negotiation to complete.... done
Using ethernet@20b4000 device
TFTP from server 192.168.3.32; our IP address is 192.168.3.38
Filename 'zImage'.
Load address: 0x80800000
Loading: #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         ###
         1.1 MiB/s
done
Bytes transferred = 9574272 (921780 hex)
Using ethernet@20b4000 device
TFTP from server 192.168.3.32; our IP address is 192.168.3.38
Filename 'imx6ull-14x14-alpha-emmc.dtb'.
Load address: 0x83000000
Loading: ###
         2 MiB/s
done
Bytes transferred = 35807 (8bdf hex)
Kernel image @ 0x80800000 [ 0x000000 - 0x921780 ]
## Flattened Device Tree blob at 83000000
   Booting using the fdt blob at 0x83000000
   Using Device Tree in place at 83000000, end 8300bbde
Modify /soc/bus@2200000/epdc@228c000 disabled

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.15.71-dirty (hongxi@hongxi-virtual-machine) (arm-linux-gnueabihf-gcc (Linaro GCC 7.5-2019.12) 7.5.0, GNU ld (Linaro_Binutils-2019.12) 2.28.2.20170706) #1 SMP PREEMPT Sun Jul 7 16:24:28 CST 2024
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Freescale i.MX6 ULL 14x14 EVK Board
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] Reserved memory: created CMA memory pool at 0x96000000, size 160 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000080000000-0x000000009fffffff]
...

4.5 适配alpha的网口

4.5.1 修改设备树

arch/arm/boot/dts/imx6ul-14x14-alpha.dtsi

	spi4 {
		compatible = "spi-gpio";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_spi4>;
		status = "okay";
		gpio-sck = <&gpio5 11 0>;
		gpio-mosi = <&gpio5 10 0>;
		num-chipselects = <1>;
		#address-cells = <1>;
		#size-cells = <0>;

		gpio_spi: gpio@0 {
			compatible = "fairchild,74hc595";
			gpio-controller;
			#gpio-cells = <2>;
			reg = <0>;
			registers-number = <1>;
			registers-default = /bits/ 8 <0x57>;
			spi-max-frequency = <100000>;
		};
	};
	
...
	pinctrl_spi4: spi4grp { /*删除gpio5-7 gpio5-8的声明*/
		fsl,pins = <
			MX6UL_PAD_BOOT_MODE0__GPIO5_IO10	0x70a1
			MX6UL_PAD_BOOT_MODE1__GPIO5_IO11	0x70a1
		>;
	};
	
	/*eth1-phy reset*/
    pinctrl_enet1_reset: enet1resetgrp {
		fsl,pins = <
			MX6ULL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x10B0  /*gpio5-7*/
		>;
	};
	
	/*eth2-phy reset*/
	pinctrl_enet2_reset: enet2resetgrp {
		fsl,pins = <
			MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x10B0  /*gpio5-8*/
		>;
	};

	pinctrl_enet1: enet1grp {
		fsl,pins = <
			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031 /*eth1_phy clk*/
		>;
	};

	pinctrl_enet2: enet2grp {
		fsl,pins = <
			MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
			MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
			MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
			MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
			MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
			MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
			MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
			MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
			MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
			MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031 /*eth2_phy clk*/
		>;
	};
...
&fec1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_enet1  &pinctrl_enet1_reset>;
	phy-mode = "rmii";
	phy-handle = <&ethphy0>;
	phy-supply = <&reg_peri_3v3>;
	phy-reset-gpios = <&gpio5 7 GPIO_ACTIVE_LOW>; /*增加gpio5-7 用于reset phy 0*/
	phy-reset-duration-us = <200>;  /*增加reset的delay属性*/
	status = "okay";
};

&fec2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_enet2  &pinctrl_enet2_reset>;
	phy-mode = "rmii";
	phy-handle = <&ethphy1>;
	phy-supply = <&reg_peri_3v3>;
	phy-reset-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>; /*增加gpio5-8 用于reset phy 1*/
	phy-reset-duration-us = <200>;  /*增加reset的delay属性*/
	status = "okay";

	mdio {
		#address-cells = <1>;
		#size-cells = <0>;

		ethphy0: ethernet-phy@0 {  /*地址和reg都改为0*/
			compatible = "ethernet-phy-id0022.1560";
			reg = <0>;
			micrel,led-mode = <1>;
			clocks = <&clks IMX6UL_CLK_ENET_REF>;
			clock-names = "rmii-ref";

		};

		ethphy1: ethernet-phy@1 {   /*不改，原本就是1*/
			compatible = "ethernet-phy-id0022.1560";
			reg = <1>;
			micrel,led-mode = <1>;
			clocks = <&clks IMX6UL_CLK_ENET2_REF>;
			clock-names = "rmii-ref";
		};
	};
};
...

目前不使用这一路SPI，EVK的板子这是一路GPIO拓展的功能，alpha板子没有使用，直接disabled，当前也可以细化，gpio5-7 和gpio5-8这里只是拿来做CS，可以指定别的pin来做cs, 就可以继续用这路SPI。

4.5.2 驱动修改

修改phy的驱动

drivers/net/ethernet/freescale/fec_main.c

static int
fec_probe(struct platform_device *pdev)
{
	...
	/* add for alpha board LAN8720A start*/
	void __iomem *IMX6U_ENET1_TX_CLK;
	void __iomem *IMX6U_ENET2_TX_CLK;

	IMX6U_ENET1_TX_CLK = ioremap(0X020E00DC, 4);
	writel(0X14, IMX6U_ENET1_TX_CLK);

	IMX6U_ENET2_TX_CLK = ioremap(0X020E00FC, 4);
	writel(0X14, IMX6U_ENET2_TX_CLK);
	/* add for alpha board LAN8720A end*/
    
    fec_enet_get_queue_num(pdev, &num_tx_qs, &num_rx_qs);
    ...

drivers/net/phy/smsc.c

#include <linux/of_gpio.h>
#include <linux/io.h>

...

static int smsc_phy_reset(struct phy_device *phydev)
{

	int err, phy_reset;
	int msec = 1;
	struct device_node *np;
	int timeout = 50000;
	int rc;

	if (phydev->mdio.addr == 0) {
		np = of_find_node_by_path("/soc/aips-bus@02100000/ethernet@02188000");
	} else if (phydev->mdio.addr == 1) {
		np = of_find_node_by_path("/soc/aips-bus@02000000/ethernet@020b4000");
	}

	if (!np) {
		return -1;
	}

	/* A sane reset duration should not be longer than 1s */
	err = of_property_read_u32(np, "phy-reset-duration", &msec);
	if (!err && msec > 1000)
		msec = 1;

	phy_reset = of_get_named_gpio(np, "phy-reset-gpios", 0);
	if (!gpio_is_valid(phy_reset))
		return -1;

	gpio_direction_output(phy_reset, 0);
	gpio_set_value(phy_reset, 0);
	msleep(msec);
	gpio_set_value(phy_reset, 1);
	...

开启内核SMSC厂商驱动支持

Device Drivers > Network device support > PHY Device support and infrastructure >SMSC PHYs

在这里插入图片描述

对应的config: CONFIG_SMSC_PHY=y

编译内核和设备树，运行效果：

root@ATK-IMX6U:~# ifconfig
eth0      Link encap:Ethernet  HWaddr 88:bc:2f:03:ec:0b
          inet addr:192.168.3.37  Bcast:192.168.3.255  Mask:255.255.255.0
          inet6 addr: fe80::8abc:2fff:fe03:ec0b/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:33 errors:0 dropped:0 overruns:0 frame:0
          TX packets:49 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:3529 (3.4 KiB)  TX bytes:8573 (8.3 KiB)

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:14 errors:0 dropped:0 overruns:0 frame:0
          TX packets:14 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:860 (860.0 B)  TX bytes:860 (860.0 B)

root@ATK-IMX6U:~# ping 192.168.3.32
PING 192.168.3.32 (192.168.3.32) 56(84) bytes of data.
64 bytes from 192.168.3.32: icmp_seq=1 ttl=64 time=3.57 ms
64 bytes from 192.168.3.32: icmp_seq=2 ttl=64 time=1.33 ms
64 bytes from 192.168.3.32: icmp_seq=3 ttl=64 time=1.33 ms
64 bytes from 192.168.3.32: icmp_seq=4 ttl=64 time=2.42 ms
^C
--- 192.168.3.32 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3005ms
rtt min/avg/max/mdev = 1.332/2.166/3.576/0.928 ms
坂田民工
关注
  • 5
    点赞
  • 踩
  • 6
    收藏
    觉得还不错? 一键收藏
  • 打赏
    打赏
  • 0
    评论
专栏目录
评论
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

坂田民工

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付：¥1
获取中
扫码支付

您的余额不足，请更换扫码支付或充值

打赏作者

实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值