ALG：MODTRAN5 问题汇总（学习笔记3）

最新推荐文章于 2024-07-09 14:08:05 发布

NaRi~

最新推荐文章于 2024-07-09 14:08:05 发布

阅读量769

点赞数 25

分类专栏：辐射传输模型文章标签：图像处理笔记

本文链接：https://blog.csdn.net/qq_41358707/article/details/138161627

版权

辐射传输模型专栏收录该内容

7 篇文章 7 订阅

订阅专栏

一、The molecular band model

1、问题描述

在LAG中配置完成MODTRAN5.2.1，生成tape5后，调用modtran.exe过程中产生错误。原因为MODTRAN模型或分子波段模型间存在差异。

2、错误提示

"Error in OPENBM: The molecular band model data file DATA/15_2004c.bn4 does not exist.

Error: Molecular band model data file not found."

3、解决方法

Open the RTMconf.xml file stored in the /Conf directory. There you have to look for the node corresponding to MODTRAN5, then Spectral, and look for the parameter called BMNAME. Probably you currently have something like "15_2004" (also p1, 01, and 05). You need to change the date (2004) to the one you're using (2009 or 2008). I think this should solve the problem.

（在/Conf文件夹目录下，配置文件RTMconf.xml中，查找MODTRAN结点/Spectral结点/BMNAME值，将molecular band model修改为MODTRAN版本对应的即可）

二、调用modtran.exe错误

1、问题描述

Although a tape5 file can be generated, errors can still occur when running the tape5 file.

2、错误提示

"forrt1:severe(64):input conversion error,unit1,file ***"

3、解决方法

同问题一

三、参数设置取值范围问题

1、问题描述

OPAC编译成功，tape5的文件可以顺利生成，错误发生在MODTRAN中调用tape5文件时。问题可能与参数上设置的最小/最大值有关。

2、错误提示

无

3、解决方法

建议：

        For solar and viewing zenith angles, put values <90 deg. 90 deg corresponds to the Sun on the horizon and I guess that geometry is causing problems. Normally satellites observe between 0 deg (nadir) and 70 deg (similar with the SZA).
        For AOT, you put values 0 to 2. 0 corresponds to no-aerosols, maybe instead you want to put very low aerosols (AOT=0.03). 2 corresponds to very high aerosols (maybe urban pollution in Beijing).
        For O3, you have used the default values. 0.001 corresponds to very low O3, actually almost no O3 in the atmosphere. Realistic values range from 0.25 to 0.45  atm-cm.