Cisco 交换机 3650密码破解方式和其他的型号会有所不同,本人尝试用各种方式进入修改寄存器值的界面都失败,后来查询到以下的破解方式:
接通交换机电源,在15秒内,按下Mode按钮,同时System LED闪烁绿色,继续按Mode按钮,直到所有System LED变黄后松手
Mode按钮在面板正面左上角
进入交换机底层模式switch:
switch:
Switch: flash_init (初始化boot_loader)
Switch: SWITCH_IGNORE_STARTUP_CFG=1 (忽略启动配置startup-config)
Switch: boot flash:packages.conf(启动加载无配置的系统)
Would you like to enter the initial configuration dialog? [yes/no]: No(您要输入初始配置对话框吗? 选否)
之后正常进入交换机ios界面:
Switch> enable
Switch# copy startup-config running-config Destination filename[running-config]?
(将startup-config 加载到running-config)
Switch# configure terminal 进入全局模式,改密码
Switch(config)#enable password 1234
Switch(config)#username admin password 1234
Switch#write 保存配置
Switch#reload 重启交换机,按住mode按钮,再次进入底层模式
Switch:
Switch: switch: SWITCH_IGNORE_STARTUP_CFG=0 (启动加载带配置的系统)
Switch: boot flash:packages.conf (重启交换机)
重启后进入正常的交换机ios:
Switch(config)# no boot manual (交换机启动后,在交换机上禁用手动引导,保存配置)