Linux ❀ 创建桥接网卡Br0并进行关联调用

---

1、查看当前需要配置桥接网卡关联设备，此处使用网卡为ens192

[root@localhost ~]# nmcli connection show 
NAME        UUID                                  TYPE      DEVICE  
ens192      00201cba-96a2-4f7d-9e43-2e95d3dc2ebb  ethernet  ens192 

---

2、创建桥接网卡br0，并配置相关IP地址与网关，此处选择地址为手动配置，

[root@localhost ~]# nmcli connection add type bridge ifname br0 con-name br0 ipv4.addresses 10.1.1.1/24 ipv4.gateway 10.1.1.254 ipv4.dns 114.114.114.114 ipv4.method manual

若地址为dhcp则如下

[root@localhost ~]# nmcli connection add type bridge ifname br0 con-name br0

---

3、配置桥接网卡子网卡，并关联到ens192

[root@localhost ~]# nmcli connection add type bridge-slave con-name br0-slave1 ifname ens192 master br0 

---

4、开启桥接网卡与其子网卡

[root@localhost ~]# nmcli connection up br0-slave1 
[root@localhost ~]# nmcli connection up br0

---

5、查看桥接网卡是否关联成功（此处ens192网卡会失效）

[root@localhost ~]# nmcli connection show 
NAME        UUID                                  TYPE      DEVICE  
br0         5a6c2c5b-19ba-465a-a071-e2a149bf56d3  bridge    br0      
br0-slave1  2c085229-4c32-4bfa-9329-e2dad5eca37e  ethernet  ens192  
ens192      00201cba-96a2-4f7d-9e43-2e95d3dc2ebb  ethernet  -- 

---

6、关闭br0网卡自带的STP功能

[root@localhost ~]# sed -i 's/^STP=.*/STP=no/' /etc/sysconfig/network-scripts/ifcfg-br0

---

7、关闭ens192网卡开机自启功能

[root@localhost ~]# sed -i 's/^ONBOOT=.*/ONBOOT=no/' /etc/sysconfig/network-scripts/ifcfg-ens192

---

8、重启网络服务

[root@localhost ~]# systemctl restart NetworkManager

---

具体Nmcli相关命令参考博客，点击此处直接跳转