vagrant加virtualbox轻松搭建k8s集群脚本

于 2022-03-18 16:08:51 发布
阅读量1.3k 收藏 3
点赞数 2
文章标签： k8s集群搭建
版权声明：本文为博主原创文章，遵循 CC 4.0 BY-SA 版权协议，转载请附上原文出处链接和本声明。
本文链接：https://blog.csdn.net/qq_42586468/article/details/123577077
版权

文章目录

环境准备

windows 电脑上使用vagrant 加 virtualbox 搭建k8s 集群

不熟悉vagrant 与 virtualbox 的可以查看这篇文章 使用VirtualBox和Vagrant搭建Docker环境

需要下载vagrant插件vagrant plugin install vagrant-vbguest 0.21.0

如果没有VPN 需要准备如下的镜像：

k8s.gcr.io/kube-apiserver                v1.23.5   3fc1d62d6587   37 hours ago    135MB
k8s.gcr.io/kube-proxy                    v1.23.5   3c53fa8541f9   37 hours ago    112MB
k8s.gcr.io/kube-scheduler                v1.23.5   884d49d6d8c9   37 hours ago    53.5MB
k8s.gcr.io/kube-controller-manager       v1.23.5   b0c9e5e4dbb1   37 hours ago    125MB
k8s.gcr.io/etcd                          3.5.1-0   25f8c7f3da61   4 months ago    293MB
k8s.gcr.io/coredns/coredns               v1.8.6    a4ca41631cc7   5 months ago    46.8MB
k8s.gcr.io/pause                         3.6       6270bb605e12   6 months ago    683kB
ghcr.io/weaveworks/launcher/weave-npc    2.8.1     7f92d556d4ff   13 months ago   39.3MB
ghcr.io/weaveworks/launcher/weave-kube   2.8.1     df29c0a4002c   13 months ago   89MB

我已经将这些镜像上传至docker hub:

docker pull itnoobzzy/k8s:weaveworks_launcher_weave-npc_2.8.1
docker pull itnoobzzy/k8s:pause_3.6
docker pull itnoobzzy/k8s:coredns_coredns_v1.8.6
docker pull itnoobzzy/k8s:etcd_3.5.1-0
docker pull itnoobzzy/k8s:kube-scheduler_v1.23.5
docker pull itnoobzzy/k8s:kube-controller-manager_v1.23.5
docker pull itnoobzzy/k8s:kube-proxy_v1.23.5
docker pull itnoobzzy/k8s:kube-apiserver_v1.23.5

在master 节点上下载好上边的镜像后，打上官方tag:

docker tag itnoobzzy/k8s:weaveworks_launcher_weave-npc_2.8.1  ghcr.io/weaveworks/launcher/weave-npc:2.8.1
docker tag itnoobzzy/k8s:pause_3.6 k8s.gcr.io/pause:3.6
docker tag itnoobzzy/k8s:coredns_coredns_v1.8.6  k8s.gcr.io/coredns/coredns:v1.8.6
docker tag itnoobzzy/k8s:etcd_3.5.1-0  k8s.gcr.io/etcd:3.5.1-0
docker tag itnoobzzy/k8s:kube-scheduler_v1.23.5   k8s.gcr.io/kube-scheduler:v1.23.5
docker tag itnoobzzy/k8s:kube-controller-manager_v1.23.5  k8s.gcr.io/kube-controller-manager:v1.23.5
docker tag itnoobzzy/k8s:kube-proxy_v1.23.5   k8s.gcr.io/kube-proxy:v1.23.5
docker tag itnoobzzy/k8s:kube-apiserver_v1.23.5  k8s.gcr.io/kube-apiserver:v1.23.5

vagrantfile 文件

# -*- mode: ruby -*-
# vi: set ft=ruby :

Vagrant.require_version ">= 1.6.0"

boxes = [
    {
        :name => "k8s-master",
        :eth1 => "192.168.1.105",
        :mem => "2048",
        :cpu => "2"
    },
    {
        :name => "k8s-node1",
        :eth1 => "192.168.1.106",
        :mem => "2048",
        :cpu => "1"
    },
    {
        :name => "k8s-node2",
        :eth1 => "192.168.1.107",
        :mem => "2048",
        :cpu => "1"
    }

]

Vagrant.configure(2) do |config|

  config.vm.box = "centos/7"
  boxes.each do |opts|
    config.vm.define opts[:name] do |config|
      config.vm.hostname = opts[:name]
      config.vm.provider "vmware_fusion" do |v|
        v.vmx["memsize"] = opts[:mem]
        v.vmx["numvcpus"] = opts[:cpu]
      end
      config.vm.provider "virtualbox" do |v|
        v.customize ["modifyvm", :id, "--memory", opts[:mem]]
        v.customize ["modifyvm", :id, "--cpus", opts[:cpu]]
      end
      config.vm.network :public_network, ip: opts[:eth1]
    end
  end
end

在一个空文件夹下使用vagrant命令执行创建虚拟机，当虚拟机创建完毕后执行下边脚本，创建docker与 k8s 相关服务

检查三台节点虚拟机是否允许正常：
在这里插入图片描述

创建docker 与 k8s 服务脚本

#/bin/sh

# install some tools
sudo yum update -y
sudo sudo yum install -y gcc kernel-deve
sudo yum install -y vim telnet bind-utils wget


# install docker
curl -fsSL get.docker.com -o get-docker.sh
sh get-docker.sh

sudo mkdir /etc/docker
sudo bash -c 'cat > /etc/docker/daemon.json <<EOF
{
  "exec-opts": ["native.cgroupdriver=systemd"],
  "log-driver": "json-file",
  "log-opts": {
    "max-size": "100m"
  },
  "storage-driver": "overlay2",
  "storage-opts": [
    "overlay2.override_kernel_check=true"
  ],
  "data-root": "/data/docker"
}
EOF'

if [ ! $(getent group docker) ];
then 
    sudo groupadd docker;
else
    echo "docker user group already exists"
fi

sudo gpasswd -a $USER docker
sudo newgrp docker
exit
rm -rf get-docker.sh

# open password auth for backup if ssh key doesn't work, bydefault, username=vagrant password=vagrant
sudo sed -i 's/PasswordAuthentication no/PasswordAuthentication yes/g' /etc/ssh/sshd_config
sudo systemctl restart sshd

sudo bash -c 'cat > /etc/yum.repos.d/kubernetes.repo <<EOF 
[kubernetes] 
name=Kubernetes 
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64 
enabled=1 
gpgcheck=0 
repo_gpgcheck=0 
EOF
'

# 也可以尝试国内的源 http://ljchen.net/2018/10/23/%E5%9F%BA%E4%BA%8E%E9%98%BF%E9%87%8C%E4%BA%91%E9%95%9C%E5%83%8F%E7%AB%99%E5%AE%89%E8%A3%85kubernetes/

sudo setenforce 0

# install kubeadm, kubectl, and kubelet.
sudo yum install -y kubelet kubeadm kubectl

sudo bash -c 'cat <<EOF >  /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_forward=1
EOF'
sudo sysctl --system

sudo systemctl stop firewalld
sudo systemctl disable firewalld
sudo swapoff -a

sudo systemctl enable docker.service
sudo systemctl enable kubelet.service

检查三个节点已经安装了kubeadm, kubelet and kubectl, 并且docker已经运行了：

[vagrant@k8s-master ~]$ which kubeadm
/usr/bin/kubeadm
[vagrant@k8s-master ~]$ which kubelet
/usr/bin/kubelet
[vagrant@k8s-master ~]$ which kubectl
/usr/bin/kubectl

[vagrant@k8s-node1 ~]$ which kubeadm
/usr/bin/kubeadm
[vagrant@k8s-node1 ~]$ which kubelet
/usr/bin/kubelet
[vagrant@k8s-node1 ~]$ which kubectl
/usr/bin/kubectl

[vagrant@k8s-node2 ~]$ which kubeadm
/usr/bin/kubeadm
[vagrant@k8s-node2 ~]$ which kubelet
/usr/bin/kubelet
[vagrant@k8s-node2 ~]$ which kubectl
/usr/bin/kubectl

[vagrant@k8s-master ~]$ sudo docker version
Client:
 Version:         1.13.1
 API version:     1.26
 Package version: docker-1.13.1-63.git94f4240.el7.centos.x86_64
 Go version:      go1.9.4
 Git commit:      94f4240/1.13.1
 Built:           Fri May 18 15:44:33 2018
 OS/Arch:         linux/amd64

Server:
 Version:         1.13.1
 API version:     1.26 (minimum version 1.12)
 Package version: docker-1.13.1-63.git94f4240.el7.centos.x86_64
 Go version:      go1.9.4
 Git commit:      94f4240/1.13.1
 Built:           Fri May 18 15:44:33 2018
 OS/Arch:         linux/amd64
 Experimental:    false

配置k8s节点

kubeadm init on master node

  1. 先拉取镜像：kubeadm config images pull

    如果有VPN 可以直接执行上边的拉取命令，不过这里拉取的是最新的，对应下边的init 命令需要根据拉取的版本变更。

    如果没有VPN 就需要按照文章开头写的从我的hub 仓库拉取我已经下载的1.23.5版本的镜像然后打上tag

  2. sudo kubeadm init --kubernetes-version v1.23.5 --pod-network-cidr 172.100.0.0/16 --apiserver-advertise-address 192.168.1.105

    看到下边的说明初始化好了：

    [bootstrap-token] Using token: 2el3ya.rtu3ldy4avpzrt0c
[bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles
[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to get nodes
[bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstrap-token] configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstrap-token] configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
[bootstrap-token] Creating the "cluster-info" ConfigMap in the "kube-public" namespace
[kubelet-finalize] Updating "/etc/kubernetes/kubelet.conf" to point to a rotatable kubelet client certificate and key
[addons] Applied essential addon: CoreDNS
[addons] Applied essential addon: kube-proxy

Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

Alternatively, if you are the root user, you can run:

  export KUBECONFIG=/etc/kubernetes/admin.conf

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

Then you can join any number of worker nodes by running the following on each as root:

kubeadm join 192.168.1.105:6443 --token 2el3ya.rtu3ldy4avpzrt0c \
        --discovery-token-ca-cert-hash sha256:6304c84389fd49d357257136d4b2d26d4b6b5b18a520a3cfc82553b82b2388f4

    需要将这个命令记录下来，后续node 节点加入集群需要：

    kubeadm join 192.168.1.105:6443 --token 2el3ya.rtu3ldy4avpzrt0c \
        --discovery-token-ca-cert-hash sha256:6304c84389fd49d357257136d4b2d26d4b6b5b18a520a3cfc82553b82b2388f4

  3. 然后在master 节点上运行：

     mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

  4. 检查pod:

    [vagrant@k8s-master ~]$ kubectl get pod --all-namespaces
NAMESPACE     NAME                                 READY   STATUS              RESTARTS   AGE
kube-system   coredns-64897985d-2gvcl              0/1     ContainerCreating   0          2m22s
kube-system   coredns-64897985d-97zwx              0/1     ContainerCreating   0          2m22s
kube-system   etcd-k8s-master                      1/1     Running             2          2m36s
kube-system   kube-apiserver-k8s-master            1/1     Running             2          2m36s
kube-system   kube-controller-manager-k8s-master   1/1     Running             3          2m36s
kube-system   kube-proxy-b7jkn                     1/1     Running             0          2m22s
kube-system   kube-scheduler-k8s-master            1/1     Running             3          2m36s

    发现两个dns 的pod 没有运行中，是因为网络插件还没有安装

kubeadm join

  1. 此时先不着急在master 节点上安装网络插件, 先将两个node节点加入集群（因为我第一次安装的时候发现先安装网络插件，在将node 节点加入集群，可能会出现node 节点dns pod 无法初始化运行的情况）

    node1 加入集群：

    [vagrant@k8s-node1 ~]$ sudo kubeadm join 192.168.1.105:6443 --token 2el3ya.rtu3ldy4avpzrt0c         --discovery-token-ca-cert-hash sha256:6304c84389fd49d357257136d4b2d26d4b6b5b18a520a3cfc82553b82b2388f4
[preflight] Running pre-flight checks
[preflight] Reading configuration from the cluster...
[preflight] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -o yaml'
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Starting the kubelet
[kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap...

This node has joined the cluster:
* Certificate signing request was sent to apiserver and a response was received.
* The Kubelet was informed of the new secure connection details.

Run 'kubectl get nodes' on the control-plane to see this node join the cluster.

    node2 加入集群：

    [vagrant@k8s-node2 ~]$ sudo kubeadm join 192.168.1.105:6443 --token 2el3ya.rtu3ldy4avpzrt0c         --discovery-token-ca-cert-hash sha256:6304c84389fd49d357257136d4b2d26d4b6b5b18a520a3cfc82553b82b2388f4
[preflight] Running pre-flight checks
[preflight] Reading configuration from the cluster...
[preflight] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -o yaml'
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Starting the kubelet
[kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap...

This node has joined the cluster:
* Certificate signing request was sent to apiserver and a response was received.
* The Kubelet was informed of the new secure connection details.

Run 'kubectl get nodes' on the control-plane to see this node join the cluster.

    master 节点验证两个节点是否已经加入：

    [vagrant@k8s-master ~]$ kubectl get nodes
NAME         STATUS   ROLES                  AGE     VERSION
k8s-master   Ready    control-plane,master   12m     v1.23.4
k8s-node1    Ready    <none>                 3m43s   v1.23.4
k8s-node2    Ready    <none>                 2m2s    v1.23.4

    注：我上边两个node 节点之所以是ready状态是因为我之前安装过网络插件，如果网络插件没有安装的情况下应该是notready状态

安装weave 插件

  1. master 节点安装网络插件：

    kubectl apply -f "https://cloud.weave.works/k8s/net?k8s-version=$(kubectl version | base64 | tr -d '\n')"

    注：没有VPN可能该插件也安装不上，我上边仓库离得镜像已经包括这个镜像了

    安装完插件后，所有pod状态应该如下：

    [vagrant@k8s-master ~]$ kubectl get pod --all-namespaces
NAMESPACE     NAME                                 READY   STATUS    RESTARTS     AGE
kube-system   coredns-64897985d-2gvcl              1/1     Running   0            16m
kube-system   coredns-64897985d-97zwx              1/1     Running   0            16m
kube-system   etcd-k8s-master                      1/1     Running   2            16m
kube-system   kube-apiserver-k8s-master            1/1     Running   2            16m
kube-system   kube-controller-manager-k8s-master   1/1     Running   3            16m
kube-system   kube-proxy-b7jkn                     1/1     Running   0            16m
kube-system   kube-proxy-s57st                     1/1     Running   0            5m48s
kube-system   kube-proxy-xnhx4                     1/1     Running   0            7m29s
kube-system   kube-scheduler-k8s-master            1/1     Running   3            16m
kube-system   weave-net-5bwzm                      2/2     Running   1 (7s ago)   11s
kube-system   weave-net-6b6bx                      2/2     Running   0            11s
kube-system   weave-net-ldvtv                      2/2     Running   0            11s

    如果还有为运行的可能是插件没有安装成功，在执行下安装命令在查看下

一切如来心秘密
关注
  • 2
    点赞
  • 踩
  • 3
    收藏
    觉得还不错? 一键收藏
  • 打赏
    打赏
  • 1
    评论
评论 1
添加红包

请填写红包祝福语或标题

个

红包个数最小为10个

元

红包金额最低5元

当前余额3.43元 前往充值 >
需支付：10.00元
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包

打赏作者

一切如来心秘密

你的鼓励将是我创作的最大动力

¥1 ¥2 ¥4 ¥6 ¥10 ¥20
扫码支付：¥1
获取中
扫码支付

您的余额不足，请更换扫码支付或充值

打赏作者

实付元
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明：

1.余额是钱包充值的虚拟货币，按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载，可以购买VIP、付费专栏及课程。

余额充值