实验环境raspi 4b
一、Fault注入功能基础架构
See also drivers/md/md-faulty.c and “every_nth” module option for scsi_debug.
Available fault injection capabilities
-
failslab
injects slab allocation failures. (kmalloc(), kmem_cache_alloc(), …) -
fail_page_alloc
injects page allocation failures. (alloc_pages(), get_free_pages(), …) -
fail_usercopy
injects failures in user memory access functions. (copy_from_user(), get_user(), …) -
fail_futex
injects futex deadlock and uaddr fault errors. -
fail_sunrpc
injects kernel RPC client and server failures. -
fail_make_request
injects disk IO errors on devices permitted by setting
/sys/block//make-it-fail or
/sys/block///make-it-fail. (submit_bio_noacct()) -
fail_mmc_request
injects MMC data errors on devices permitted by setting
debugfs entries under /sys/kernel/debug/mmc0/fail_mmc_request -
fail_function
injects error return on specific functions, which are marked by
ALLOW_ERROR_INJECTION() macro, by setting debugfs entries
under /sys/kernel/debug/fail_function. No boot option supported. -
NVMe fault injection
inject NVMe status code and retry flag on devices permitted by setting
debugfs entries under /sys/kernel/debug/nvme*/fault_inject. The default
status code is NVME_SC_INVALID_OPCODE with no retry. The status code and
retry flag can be set via the debugfs.
二、打开内核相关调试选项
看看系统中有没有这个文件，从结果来看，并没有，有什么特殊的编译选项需要开启？
root@runninglinuxkernel:~# ls -alh /sys/block/vda
lrwxrwxrwx 1 root root 0 Mar 13 23:59 /sys/block/vda -> ../devices/pci0000:00/0000:00:03.0/virtio0/block/vda
root@runninglinuxkernel:~# ls -alh /sys/block/vda/
total 0
drwxr-xr-x 8 root root 0 Mar 13 23:59 .
drwxr-xr-x 3 root root 0 Mar 13 23:59 ..
-r--r--r-- 1 root root 4.0K Mar 14 00:02 alignment_offset
lrwxrwxrwx 1 root root 0 Mar 14 00:02 bdi -> ../../../../../virtual/bdi/254:0
-rw-r--r-- 1 root root 4.0K Mar 14 00:02 cache_type
-r--r--r-- 1 root root 4.0K Mar 14 00:02 capability
-r--r--r-- 1 root root 4.0K Mar 14 00:02 dev
lrwxrwxrwx 1 root root 0 Mar 14 00:02 device -> ../../../virtio0
-r--r--r-- 1 root root 4.0K Mar 14 00:02 discard_alignment
-r--r--r-- 1 root root 4.0K Mar 14 00:02 ext_range
-r--r--r-- 1 root root 4.0K Mar 14 00:02 hidden
drwxr-xr-x 2 root root 0 Mar 14 00:02 holders
-r--r--r-- 1 root root 4.0K Mar 14 00:02 inflight
drwxr-xr-x 3 root root 0 Mar 13 23:59 mq
drwxr-xr-x 2 root root 0 Mar 14 00:02 power
drwxr-xr-x 3 root root 0 Mar 14 00:02 queue
-r--r--r-- 1 root root 4.0K Mar 14 00:02 range
-r--r--r-- 1 root root 4.0K Mar 14 00:02 removable
-r--r--r-- 1 root root 4.0K Mar 14 00:02 ro
-r--r--r-- 1 root root 4.0K Mar 13 23:59 serial
-r--r--r-- 1 root root 4.0K Mar 14 00:02 size
drwxr-xr-x 2 root root 0 Mar 13 23:59 slaves
-r--r--r-- 1 root root 4.0K Mar 14 00:02 stat
lrwxrwxrwx 1 root root 0 Mar 13 23:59 subsystem -> ../../../../../../class/block
drwxr-xr-x 2 root root 0 Mar 14 00:02 trace
-rw-r--r-- 1 root root 4.0K Mar 13 23:59 uevent
那就查查配置文件中FAULT_INJECT相关的字段。
rlk@rlk:runninglinuxkernel_5.0$ grep "FAULT_INJECT" * -r
arch/riscv/configs/busybox_defconfig:# CONFIG_FAULT_INJECTION is not set
arch/riscv/configs/debian_defconfig:# CONFIG_FAULT_INJECTION is not set
arch/x86/configs/debian_defconfig:# CONFIG_FAULT_INJECTION is not set
arch/arm64/configs/busybox_defconfig:# CONFIG_F2FS_FAULT_INJECTION is not set
arch/arm64/configs/busybox_defconfig:# CONFIG_FAULT_INJECTION is not set
arch/arm64/configs/debian_default_defconfig:# CONFIG_DRBD_FAULT_INJECTION is not set
arch/arm64/configs/debian_default_defconfig:# CONFIG_F2FS_FAULT_INJECTION is not set
arch/arm64/configs/debian_default_defconfig:# CONFIG_NFSD_FAULT_INJECTION is not set
arch/arm64/configs/debian_default_defconfig:# CONFIG_FAULT_INJECTION is not set
arch/arm64/configs/debian_defconfig:# CONFIG_F2FS_FAULT_INJECTION is not set
arch/arm64/configs/debian_defconfig:# CONFIG_FAULT_INJECTION is not set
- 将故障注入相关内核编译选项打开。
CONFIG_FUNCTION_ERROR_INJECTION=y
CONFIG_FAULT_INJECTION=y
CONFIG_FAILSLAB=y
CONFIG_FAIL_PAGE_ALLOC=y
CONFIG_FAIL_MAKE_REQUEST=y
CONFIG_FAIL_IO_TIMEOUT=y
CONFIG_FAIL_FUTEX=y
CONFIG_FAULT_INJECTION_DEBUG_FS=y
有可能在.config文件中找不到对应的配置选项，需要在menuconfig中输入/查找，然后将对应的选项打开。
- 重新编译树莓派内核。
make KERNEL=kernel8 ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- Image modules dtbs -j24
- 重新编译内核源码之后，再次查看已经有磁盘IO相关的故障注入相关选项。
curtis@raspberrypi:~ $ ll /sys/class/block/sda/
total 0
-r--r--r-- 1 root root 4096 Jun 29 15:16 alignment_offset
lrwxrwxrwx 1 root root 0 Jun 29 15:16 bdi -> ../../../../../../../../../../../../../../virtual/bdi/8:0
-r--r--r-- 1 root root 4096 Jun 29 15:16 capability
-r--r--r-- 1 root root 4096 Jun 29 14:17 dev
lrwxrwxrwx 1 root root 0 Jun 29 15:16 device -> ../../../0:0:0:0
-r--r--r-- 1 root root 4096 Jun 29 15:16 discard_alignment
-r--r--r-- 1 root root 4096 Jun 29 15:16 diskseq
-r--r--r-- 1 root root 4096 Jun 29 15:16 events
-r--r--r-- 1 root root 4096 Jun 29 15:16 events_async
-rw-r--r-- 1 root root 4096 Jun 29 15:16 events_poll_msecs
-r--r--r-- 1 root root 4096 Jun 29 15:16 ext_range
-r--r--r-- 1 root root 4096 Jun 29 15:16 hidden
drwxr-xr-x 2 root root 0 Jun 29 15:16 holders
-r--r--r-- 1 root root 4096 Jun 29 15:16 inflight
drwxr-xr-x 2 root root 0 Jun 29 15:16 integrity
-rw-r--r-- 1 root root 4096 Jun 29 15:16 io-timeout-fail
-rw-r--r-- 1 root root 4096 Jun 29 15:16 make-it-fail
drwxr-xr-x 3 root root 0 Jun 29 15:16 mq
drwxr-xr-x 2 root root 0 Jun 29 15:16 power
drwxr-xr-x 3 root root 0 Jun 29 14:17 queue
-r--r--r-- 1 root root 4096 Jun 29 15:16 range
-r--r--r-- 1 root root 4096 Jun 29 14:17 removable
-r--r--r-- 1 root root 4096 Jun 29 14:24 ro
drwxr-xr-x 5 root root 0 Jun 29 14:17 sda1
drwxr-xr-x 5 root root 0 Dec 22 2022 sda2
-r--r--r-- 1 root root 4096 Jun 29 14:24 size
drwxr-xr-x 2 root root 0 Jun 29 14:17 slaves
-r--r--r-- 1 root root 4096 Jun 29 14:24 stat
lrwxrwxrwx 1 root root 0 Jun 29 14:17 subsystem -> ../../../../../../../../../../../../../../../class/block
drwxr-xr-x 2 root root 0 Jun 29 15:16 trace
-rw-r--r-- 1 root root 4096 Dec 22 2022 uevent
已经具备故障注入的能力，应该怎么使用？？
root@raspberrypi:/home/curtis# ll /sys/kernel/debug/fail
fail_function/ fail_futex/ fail_io_timeout/ fail_make_request/ fail_page_alloc/ failslab/ fail_usercopy/
root@raspberrypi:/home/curtis# ll /sys/kernel/debug/fail_make_request/
interval reject-start space times verbose_ratelimit_interval_ms
probability require-end stacktrace-depth verbose
reject-end require-start task-filter verbose_ratelimit_burst
以上这些是具体的故障的控制节点。
三、内核fault-injection行为控制
3.1 debugfs 入口
fault-inject-debugfs内核模块提供一些debugfs的入口以便在运行时配置fault-injection能力。
-
/sys/kernel/debug/fail*/probability:
故障注入的可能性，以百分比为单位。
单位：percent（百分比）
需要特别注意的是，对于某个测试用例而言，当probability=100时，可以通过设置/sys/kernel/debug/fail*/interval来控制错误的间隔时间。 -
/sys/kernel/debug/fail*/interval:
指定两个故障之间的间隔时间，内核通过调用should_fail()函数来使得故障注入不生效。
注意：如果使能该选项，需要设定interval>1（单位是什么？？），设置该选项一般是在probability=100时使用。 -
/sys/kernel/debug/fail*/times:
指定故障产生的最大次数，如果设置为-1，意味着没有上限，将会一直出错。 -
/sys/kernel/debug/fail*/space:
设置异常的size余量，每次执行到故障注入点后，都会将在该space的基础上递减size值，直到该值降低为0后才会注入异常。其中size的含义对各种异常各不相同，对于IO异常表示的是本次IO的字节数，对于内存分配表示的是内存的大小。默认值为0。 -
/sys/kernel/debug/fail*/verbose
Format: { 0 | 1 | 2 }
指定故障注入时相关信息的详细程度，0意味着没有任何信息，1每个failure只会打印一行调试信息，2将会打印函数调用trace - 在对故障注入能力做调试使用。（从实际的使用结果来看，默认值为2） -
/sys/kernel/debug/fail*/task-filter:
Format: { ‘Y’ | ‘N’ }
设置进程过滤，N表示不过滤，Y表示对启用了make-it-fail的进程和在中断上下文的流程进行过滤（通过/proc//make-it-fail=1进行设置），不触发故障注入。默认值为N。 -
/sys/kernel/debug/fail*/require-start,
-
/sys/kernel/debug/fail*/require-end,
-
/sys/kernel/debug/fail*/reject-start,
-
/sys/kernel/debug/fail*/reject-end:
设置调用流程的虚拟地址空间过滤。若调用流程设计的代码段（Text段）包含在require-start -> require-end且不包含在reject-start -> reject-end中才注入异常，可以用来设置故障注入只针对某个或某些模块执行。默认required范围为[0, ULONG_MAX)（即整个虚拟地址空间），rejected范围为[0, 0)。 -
/sys/kernel/debug/fail*/stacktrace-depth:
设置[require-start, require-end) 和[reject-start, reject-end)跟踪的调用深度。默认值为32。 -
/sys/kernel/debug/fail_page_alloc/ignore-gfp-highmem:
格式：{ ‘Y’ | ‘N’ }
设置页分配的高端内存过滤，设置为Y后当分配的内存类型包含__GFP_HIGHMEM（高端内存）不启用故障注入。默认值为N。 -
/sys/kernel/debug/failslab/ignore-gfp-wait:
-
/sys/kernel/debug/fail_page_alloc/ignore-gfp-wait:
格式：{ ‘Y’ | ‘N’ }
设置内存分配的分配模式过滤，设置为Y后只对非睡眠的内存分配启用故障注入（GFP_ATOMIC）。默认值为N。 -
/sys/kernel/debug/fail_page_alloc/min-order:
设置页分配order的过滤限制，当内核分配页小于该设定值则不进行故障注入。默认值为1 -
/sys/kernel/debug/fail_futex/ignore-private:
格式：{ ‘Y’ | ‘N’ }
默认为“N”，将其设置为“Y”将禁用故障注入在处理私有（地址空间）futexes 时。 -
/sys/kernel/debug/fail_sunrpc/ignore-client-disconnect:
格式：{ ‘Y’ | ‘N’ }
默认为“N”，将其设置为“Y”将禁用断开连接在 RPC 客户端上注入。 -
/sys/kernel/debug/fail_sunrpc/ignore-server-disconnect:
格式：{ ‘Y’ | ‘N’ }
默认为“N”，将其设置为“Y”将禁用断开连接在 RPC 服务器上注入。 -
/sys/kernel/debug/fail_sunrpc/ignore-cache-wait:
格式：{ ‘Y’ | ‘N’ }
默认为“N”，将其设置为“Y”将禁用缓存等待在 RPC 服务器上注入。
-
/sys/kernel/debug/fail_function/inject:
格式：{ ‘函数名’ | ‘!函数名’ | ‘’ }
通过名称指定错误注入的目标函数，如果函数名称前导 ‘!’ 前缀，给定的函数是从注入列表中删除。如果没有指定 (‘’)，注入列表被清除。
-
/sys/kernel/debug/fail_function/injectable:
（只读）显示错误注入函数和什么类型可以指定错误值。错误类型将是以下之一
以下;- NULL：retval 必须为 0。
- ERRNO：retval 必须为 -1 到 -MAX_ERRNO (-4096)。
- ERR_NULL：retval 必须是 0 或 -1 到 -MAX_ERRNO (-4096)。
-
/sys/kernel/debug/fail_function/<函数名>/retval:
指定要注入给定函数的“错误”返回值，这将在用户指定新的注入条目时创建。
请注意，此文件仅接受无符号值。所以，如果你想使用负 errno，你最好使用 ‘printf’ 而不是 ‘echo’，例如：
$ printf %#x -12 > retval
3.2 故障注入启动参数配置
前文中提到的debugfs接口只在debugfs启用后在有效，对于在内核启动阶段或没有设置debugfs配置选项的情况，Fault-injection的默认配置值通过启动参数进行传递，包括以下：
fail_page_alloc=
fail_make_request=
fail_futex=
mmc_core.fail_request=<interval>,<probability>,<space>,<times>
通过启动参数传入的参数有限，目前只能接受interval、probability、space和times这4个参数（其他参数会被内核设置为默认的值），但是在一般情况下也够用了。
例如：如果想在内核启动阶段就启用failslab 100%无限故障注入，则可以传入内核启动参数：
failslab=1,100,0,-1
过程条目
^^^^^^^^^^^^
-
/proc//fail-nth,
/proc/self/task//fail-nth:向该文件写入整数 N 会使任务中的第 N 次调用失败。
读取此文件返回一个整数值。“0”值表示
注入了先前写入此文件的故障设置。
正整数 N 表示故障尚未注入。
请注意，此文件启用所有类型的故障（slab、futex 等）。
此设置优先于所有其他通用 debugfs 设置
例如概率、间隔、时间等。但是按能力设置
（例如 fail_futex/ignore-private）优先于它。此功能旨在对单个故障进行系统测试
系统调用。请参见下面的示例。
四、添加新的故障注入能力
- #include <linux/fault-inject.h>
-定义故障属性
DECLARE_FAULT_ATTR（名称）；
请看fault-inject.h中struct fault_attr的定义了解详情。
-提供一种配置故障属性的方法
-引导选项
如果您需要从启动时启用故障注入功能，您可以
提供引导选项来配置它。它有一个辅助函数：
setup_fault_attr(attr, str);
-
debugfs 条目
faillab、fail_page_alloc、fail_usercopy 和 fail_make_request 使用这种方式。
辅助功能：fault_create_debugfs_attr（名称，父级，属性）；
-模块参数
如果故障注入能力的范围限制在单内核模块，最好提供模块参数给配置故障属性。
-添加一个钩子来插入失败
在 should_fail() 返回 true 时，客户端代码应该注入一个失败：
应该失败（属性，大小）；
五、应用实例
Inject slab allocation failures into module init/exit code.
#!/bin/bash
FAILTYPE=failslab
echo Y > /sys/kernel/debug/$FAILTYPE/task-filter
echo 10 > /sys/kernel/debug/$FAILTYPE/probability
echo 100 > /sys/kernel/debug/$FAILTYPE/interval
echo -1 > /sys/kernel/debug/$FAILTYPE/times
echo 0 > /sys/kernel/debug/$FAILTYPE/space
echo 2 > /sys/kernel/debug/$FAILTYPE/verbose
echo Y > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait
faulty_system()
{
bash -c "echo 1 > /proc/self/make-it-fail && exec $*"
}
if [ $# -eq 0 ]
then
echo "Usage: $0 modulename [ modulename ... ]"
exit 1
fi
for m in $*
do
echo inserting $m...
faulty_system modprobe $m
echo removing $m...
faulty_system modprobe -r $m
done
Inject page allocation failures only for a specific module::
#!/bin/bash
FAILTYPE=fail_page_alloc
module=$1
if [ -z $module ]
then
echo "Usage: $0 <modulename>"
exit 1
fi
modprobe $module
if [ ! -d /sys/module/$module/sections ]
then
echo Module $module is not loaded
exit 1
fi
cat /sys/module/$module/sections/.text > /sys/kernel/debug/$FAILTYPE/require-start
cat /sys/module/$module/sections/.data > /sys/kernel/debug/$FAILTYPE/require-end
echo N > /sys/kernel/debug/$FAILTYPE/task-filter
echo 10 > /sys/kernel/debug/$FAILTYPE/probability
echo 100 > /sys/kernel/debug/$FAILTYPE/interval
echo -1 > /sys/kernel/debug/$FAILTYPE/times
echo 0 > /sys/kernel/debug/$FAILTYPE/space
echo 2 > /sys/kernel/debug/$FAILTYPE/verbose
echo Y > /sys/kernel/debug/$FAILTYPE/ignore-gfp-wait
echo Y > /sys/kernel/debug/$FAILTYPE/ignore-gfp-highmem
echo 10 > /sys/kernel/debug/$FAILTYPE/stacktrace-depth
trap "echo 0 > /sys/kernel/debug/$FAILTYPE/probability" SIGINT SIGTERM EXIT
echo "Injecting errors into the module $module... (interrupt to stop)"
sleep 1000000
Inject open_ctree error while btrfs mount::
#!/bin/bash
rm -f testfile.img
dd if=/dev/zero of=testfile.img bs=1M seek=1000 count=1
DEVICE=$(losetup --show -f testfile.img)
mkfs.btrfs -f $DEVICE
mkdir -p tmpmnt
FAILTYPE=fail_function
FAILFUNC=open_ctree
echo $FAILFUNC > /sys/kernel/debug/$FAILTYPE/inject
printf %#x -12 > /sys/kernel/debug/$FAILTYPE/$FAILFUNC/retval
echo N > /sys/kernel/debug/$FAILTYPE/task-filter
echo 100 > /sys/kernel/debug/$FAILTYPE/probability
echo 0 > /sys/kernel/debug/$FAILTYPE/interval
echo -1 > /sys/kernel/debug/$FAILTYPE/times
echo 0 > /sys/kernel/debug/$FAILTYPE/space
echo 1 > /sys/kernel/debug/$FAILTYPE/verbose
mount -t btrfs $DEVICE tmpmnt
if [ $? -ne 0 ]
then
echo "SUCCESS!"
else
echo "FAILED!"
umount tmpmnt
fi
echo > /sys/kernel/debug/$FAILTYPE/inject
rmdir tmpmnt
losetup -d $DEVICE
rm testfile.img
fail_io_timeout使用示例
-
先配置/sys/kernel/debug/fail_io_timeout故障参数。
# 设置故障出现的可能性为100% root@raspberrypi:/sys/kernel/debug/fail_io_timeout# echo 100 > probability # 没有错误次数上限 root@raspberrypi:/sys/kernel/debug/fail_io_timeout# echo -1 > times # 设置两次故障的间隔时间为 10ms root@raspberrypi:/sys/kernel/debug/fail_io_timeout# echo 10 > interval -
使能故障
root@raspberrypi:/sys/kernel/debug/fail_io_timeout# echo 1 > /sys/block/sdb/io-timeout-fail # 使用dd命令触发I/O流程 root@runninglinuxkernel:~# dd if=/dev/sdb of=./test.img bs=1M count=100 oflag=direct [ 1430.673613] FAULT_INJECTION: forcing a failure. name fail_io_timeout, interval 10, probability 100, space 0, times -1 [ 1430.673660] CPU: 2 PID: 107 Comm: usb-storage Tainted: G C 6.1.35-v8 #3 [ 1430.673676] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 1430.673685] Call trace: [ 1430.673691] dump_backtrace+0xfc/0x108 [ 1430.673711] show_stack+0x20/0x30 [ 1430.673722] dump_stack_lvl+0x8c/0xb8 [ 1430.673740] dump_stack+0x18/0x34 [ 1430.673753] should_fail_ex+0x1e4/0x238 [ 1430.673770] should_fail+0x14/0x20 [ 1430.673784] __blk_should_fake_timeout+0x24/0x30 [ 1430.673804] scsi_done_internal+0x13c/0x160 [ 1430.673822] scsi_done_direct+0x1c/0x28 [ 1430.673837] usb_stor_control_thread+0x274/0x2b0 [ 1430.673855] kthread+0x100/0x118 [ 1430.673871] ret_from_fork+0x10/0x20 [ 1461.268398] VFS: busy inodes on changed media sdb [ 1461.269517] sd 1:0:0:0: [sdb] 61440000 512-byte logical blocks: (31.5 GB/29.3 GiB) [ 1461.290253] FAULT_INJECTION: forcing a failure. name fail_io_timeout, interval 10, probability 100, space 0, times -1 <-- 设置的故障参数 [ 1461.290298] CPU: 0 PID: 107 Comm: usb-storage Tainted: G C 6.1.35-v8 #3 [ 1461.290315] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 1461.290325] Call trace: <-- 函数调用栈 [ 1461.290331] dump_backtrace+0xfc/0x108 [ 1461.290352] show_stack+0x20/0x30 [ 1461.290364] dump_stack_lvl+0x8c/0xb8 [ 1461.290381] dump_stack+0x18/0x34 [ 1461.290393] should_fail_ex+0x1e4/0x238 [ 1461.290411] should_fail+0x14/0x20 [ 1461.290425] __blk_should_fake_timeout+0x24/0x30 [ 1461.290445] scsi_done_internal+0x13c/0x160 [ 1461.290462] scsi_done_direct+0x1c/0x28 [ 1461.290477] usb_stor_control_thread+0x274/0x2b0 [ 1461.290496] kthread+0x100/0x118 [ 1461.290511] ret_from_fork+0x10/0x20 [ 1491.982600] sd 1:0:0:0: [sdb] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=DRIVER_OK cmd_age=30s [ 1491.982642] sd 1:0:0:0: [sdb] tag#0 CDB: opcode=0x28 28 00 03 a9 7f f9 00 00 01 00 [ 1491.982661] I/O error, dev sdb, sector 61439993 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2 [ 1491.986407] FAULT_INJECTION: forcing a failure. name fail_io_timeout, interval 10, probability 100, space 0, times -1 [ 1491.986456] CPU: 0 PID: 107 Comm: usb-storage Tainted: G C 6.1.35-v8 #3 [ 1491.986475] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 1491.986485] Call trace: [ 1491.986491] dump_backtrace+0xfc/0x108 [ 1491.986513] show_stack+0x20/0x30 [ 1491.986524] dump_stack_lvl+0x8c/0xb8 [ 1491.986542] dump_stack+0x18/0x34 [ 1491.986555] should_fail_ex+0x1e4/0x238 [ 1491.986574] should_fail+0x14/0x20 [ 1491.986588] __blk_should_fake_timeout+0x24/0x30 [ 1491.986609] scsi_done_internal+0x13c/0x160 [ 1491.986626] scsi_done_direct+0x1c/0x28 [ 1491.986641] usb_stor_control_thread+0x274/0x2b0 [ 1491.986661] kthread+0x100/0x118 [ 1491.986676] ret_from_fork+0x10/0x20 # 数据拷贝进程进入D状态 curtis@raspberrypi:~ $ ps aux | grep dd root 4149 0.0 0.0 6016 2508 pts/0 D+ 00:38 0:00 dd if=/dev/sdb of=./test.img bs=1M count=100 iflag=direct curtis 4325 0.0 0.0 6044 636 pts/1 S+ 00:40 0:00 grep --color=auto dd curtis@raspberrypi:~ $
Tool to run command with failslab or fail_page_alloc
In order to make it easier to accomplish the tasks mentioned above, we can use tools/testing/fault-injection/failcmd.sh. Please run a command “./tools/testing/fault-injection/failcmd.sh --help” for more information and see the following examples.
#!/bin/bash
# SPDX-License-Identifier: GPL-2.0
#
# NAME
# failcmd.sh - run a command with injecting slab/page allocation failures
#
# SYNOPSIS
# failcmd.sh --help
# failcmd.sh [<options>] command [arguments]
#
# DESCRIPTION
# Run command with injecting slab/page allocation failures by fault
# injection.
#
# NOTE: you need to run this script as root.
#
usage()
{
cat >&2 <<EOF
Usage: $0 [options] command [arguments]
OPTIONS
-p percent
--probability=percent
likelihood of failure injection, in percent.
Default value is 1
-t value
--times=value
specifies how many times failures may happen at most.
Default value is 1
--oom-kill-allocating-task=value
set /proc/sys/vm/oom_kill_allocating_task to specified value
before running the command.
Default value is 1
-h, --help
Display a usage message and exit
--interval=value, --space=value, --verbose=value, --task-filter=value,
--stacktrace-depth=value, --require-start=value, --require-end=value,
--reject-start=value, --reject-end=value, --ignore-gfp-wait=value
See Documentation/fault-injection/fault-injection.rst for more
information
failslab options:
--cache-filter=value
fail_page_alloc options:
--ignore-gfp-highmem=value, --min-order=value
ENVIRONMENT
FAILCMD_TYPE
The following values for FAILCMD_TYPE are recognized:
failslab
inject slab allocation failures
fail_page_alloc
inject page allocation failures
If FAILCMD_TYPE is not defined, then failslab is used.
EOF
}
if [ $UID != 0 ]; then
echo must be run as root >&2
exit 1
fi
DEBUGFS=`mount -t debugfs | head -1 | awk '{ print $3}'`
if [ ! -d "$DEBUGFS" ]; then
echo debugfs is not mounted >&2
exit 1
fi
FAILCMD_TYPE=${FAILCMD_TYPE:-failslab}
FAULTATTR=$DEBUGFS/$FAILCMD_TYPE
if [ ! -d $FAULTATTR ]; then
echo $FAILCMD_TYPE is not available >&2
exit 1
fi
LONGOPTS=probability:,interval:,times:,space:,verbose:,task-filter:
LONGOPTS=$LONGOPTS,stacktrace-depth:,require-start:,require-end:
LONGOPTS=$LONGOPTS,reject-start:,reject-end:,oom-kill-allocating-task:,help
if [ $FAILCMD_TYPE = failslab ]; then
LONGOPTS=$LONGOPTS,ignore-gfp-wait:,cache-filter:
elif [ $FAILCMD_TYPE = fail_page_alloc ]; then
LONGOPTS=$LONGOPTS,ignore-gfp-wait:,ignore-gfp-highmem:,min-order:
fi
TEMP=`getopt -o p:i:t:s:v:h --long $LONGOPTS -n 'failcmd.sh' -- "$@"`
if [ $? != 0 ]; then
usage
exit 1
fi
eval set -- "$TEMP"
fault_attr_default()
{
echo N > $FAULTATTR/task-filter
echo 0 > $FAULTATTR/probability
echo 1 > $FAULTATTR/times
}
fault_attr_default
oom_kill_allocating_task_saved=`cat /proc/sys/vm/oom_kill_allocating_task`
restore_values()
{
fault_attr_default
echo $oom_kill_allocating_task_saved \
> /proc/sys/vm/oom_kill_allocating_task
}
#
# Default options
#
declare -i oom_kill_allocating_task=1
declare task_filter=Y
declare -i probability=1
declare -i times=1
while true; do
case "$1" in
-p|--probability)
probability=$2
shift 2
;;
-i|--interval)
echo $2 > $FAULTATTR/interval
shift 2
;;
-t|--times)
times=$2
shift 2
;;
-s|--space)
echo $2 > $FAULTATTR/space
shift 2
;;
-v|--verbose)
echo $2 > $FAULTATTR/verbose
shift 2
;;
--task-filter)
task_filter=$2
shift 2
;;
--stacktrace-depth)
echo $2 > $FAULTATTR/stacktrace-depth
shift 2
;;
--require-start)
echo $2 > $FAULTATTR/require-start
shift 2
;;
--require-end)
echo $2 > $FAULTATTR/require-end
shift 2
;;
--reject-start)
echo $2 > $FAULTATTR/reject-start
shift 2
;;
--reject-end)
echo $2 > $FAULTATTR/reject-end
shift 2
;;
--oom-kill-allocating-task)
oom_kill_allocating_task=$2
shift 2
;;
--ignore-gfp-wait)
echo $2 > $FAULTATTR/ignore-gfp-wait
shift 2
;;
--cache-filter)
echo $2 > $FAULTATTR/cache_filter
shift 2
;;
--ignore-gfp-highmem)
echo $2 > $FAULTATTR/ignore-gfp-highmem
shift 2
;;
--min-order)
echo $2 > $FAULTATTR/min-order
shift 2
;;
-h|--help)
usage
exit 0
shift
;;
--)
shift
break
;;
esac
done
[ -z "$1" ] && exit 0
echo $oom_kill_allocating_task > /proc/sys/vm/oom_kill_allocating_task
echo $task_filter > $FAULTATTR/task-filter
echo $probability > $FAULTATTR/probability
echo $times > $FAULTATTR/times
trap "restore_values" SIGINT SIGTERM EXIT
cmd="echo 1 > /proc/self/make-it-fail && exec $@"
bash -c "$cmd"
Examples:
Run a command “make -C tools/testing/selftests/ run_tests” with injecting slab
allocation failure::
# ./tools/testing/fault-injection/failcmd.sh \
-- make -C tools/testing/selftests/ run_tests
Same as above except to specify 100 times failures at most instead of one time
at most by default::
# ./tools/testing/fault-injection/failcmd.sh --times=100 \
-- make -C tools/testing/selftests/ run_tests
Same as above except to inject page allocation failure instead of slab
allocation failure::
# env FAILCMD_TYPE=fail_page_alloc \
./tools/testing/fault-injection/failcmd.sh --times=100 \
-- make -C tools/testing/selftests/ run_tests
Systematic faults using fail-nth
The following code systematically faults 0-th, 1-st, 2-nd and so on capabilities in the socketpair() system call::
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/socket.h>
#include <sys/syscall.h>
#include <fcntl.h>
#include <unistd.h>
#include <string.h>
#include <stdlib.h>
#include <stdio.h>
#include <errno.h>
int main()
{
int i, err, res, fail_nth, fds[2];
char buf[128];
system("echo N > /sys/kernel/debug/failslab/ignore-gfp-wait");
sprintf(buf, "/proc/self/task/%ld/fail-nth", syscall(SYS_gettid));
fail_nth = open(buf, O_RDWR);
for (i = 1;; i++) {
sprintf(buf, "%d", i);
write(fail_nth, buf, strlen(buf));
res = socketpair(AF_LOCAL, SOCK_STREAM, 0, fds);
err = errno;
pread(fail_nth, buf, sizeof(buf), 0);
if (res == 0) {
close(fds[0]);
close(fds[1]);
}
printf("%d-th fault %c: res=%d/%d\n", i, atoi(buf) ? 'N' : 'Y',
res, err);
if (atoi(buf))
break;
}
return 0;
}
An example output::
1-th fault Y: res=-1/23
2-th fault Y: res=-1/23
3-th fault Y: res=-1/12
4-th fault Y: res=-1/12
5-th fault Y: res=-1/23
6-th fault Y: res=-1/23
7-th fault Y: res=-1/23
8-th fault Y: res=-1/12
9-th fault Y: res=-1/12
10-th fault Y: res=-1/12
11-th fault Y: res=-1/12
12-th fault Y: res=-1/12
13-th fault Y: res=-1/12
14-th fault Y: res=-1/12
15-th fault Y: res=-1/12
16-th fault N: res=0/12
后续使用的时候不断完善。
3972
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
