Kubernetes 1.25 集群搭建

置顶运维生涯记录

已于 2023-03-27 17:12:16 修改

阅读量2.3k

点赞数 2

分类专栏： Kubernetes 文章标签： kubernetes linux 运维

于 2022-09-29 16:45:45 首次发布

本文链接：https://blog.csdn.net/qq_43164571/article/details/127109850

版权

Kubernetes 专栏收录该内容

42 篇文章 14 订阅

订阅专栏

角色	IP	系统
k8s-master01、Keepalived(主)+Nginx	172.16.3.225/21	Rocky Linux release 8.6 (Green Obsidian)
k8s-master02、Keepalived(从)+Nginx	172.16.3.226/21	Rocky Linux release 8.6 (Green Obsidian)
k8s-master03、Keepalived(从)+Nginx	172.16.3.227/21	Rocky Linux release 8.6 (Green Obsidian)
k8s-node01	172.16.4.184/21	Rocky Linux release 8.6 (Green Obsidian)
VIP	172.16.3.254/21

一、准备工作：

1、修改默认源 – 阿里云 [可选步骤]

	1、修改系统默认源BaseOS
sed -e 's|^mirrorlist=|#mirrorlist=|g' \
    -e 's|^#baseurl=http://dl.rockylinux.org/$contentdir|baseurl=https://mirrors.aliyun.com/rockylinux|g' \
    -i.bak \
    /etc/yum.repos.d/Rocky-*.repo

	2、配置epel源
1)安装 epel 配置包
dnf install -y https://mirrors.aliyun.com/epel/epel-release-latest-8.noarch.rpm
2）将 repo 配置中的地址替换为阿里云镜像站地址
sed -i 's|^#baseurl=https://download.example/pub|baseurl=https://mirrors.aliyun.com|' /etc/yum.repos.d/epel*
sed -i 's|^metalink|#metalink|' /etc/yum.repos.d/epel*

dnf makecache

2、时间同步

(1)安装chrony服务
dnf install chrony -y

(2)修改chrony服务配置⽂件
vi /etc/chrony.conf 
...
# 注释官⽅的时间服务器，换成国内的时间服务器即可
server ntp.aliyun.com iburst
server ntp1.aliyun.com iburst
server ntp2.aliyun.com iburst
server ntp3.aliyun.com iburst
server ntp4.aliyun.com iburst
server ntp5.aliyun.com iburst
...

(3)配置chronyd的开机⾃启动
systemctl enable --now chronyd
systemctl restart chronyd

(4)查看服务
systemctl status chronyd

3、安装依赖软件

dnf install ipvsadm ipset tar bash-completion yum-utils device-mapper-persistent-data lvm2 iproute-tc -y

4、修改Hostname，配置hosts

172.16.3.225设置主机名： hostnamectl set-hostname k8s-master01
172.16.3.226设置主机名： hostnamectl set-hostname k8s-master02
172.16.3.227设置主机名： hostnamectl set-hostname k8s-master03
172.16.4.184设置主机名： hostnamectl set-hostname k8s-node01

cat >> /etc/hosts << 'EOF'
172.16.3.225 k8s-master01
172.16.3.226 k8s-master02
172.16.3.227 k8s-master03
172.16.4.184 k8s-node01
172.16.3.254 vip.apiserver
EOF

5、关闭防火墙、关闭Selinux、关闭SWAP

systemctl disable firewalld --now
sed -i 's/SELINUX=enforcing/SELINUX=disabled/g' /etc/selinux/config
swapoff -a && sed -i '/ swap / s/^\(.*\)$/#\1/g' /etc/fstab

6、内核升级

# 查看内核版本
uname -sr

# 0、升级所有软件包
dnf update -y && dnf upgrade -y

# 1、下载公钥
rpm --import https://www.elrepo.org/RPM-GPG-KEY-elrepo.org
dnf install https://www.elrepo.org/elrepo-release-8.el8.elrepo.noarch.rpm -y

# 2、仓库启用后，列出可用的内核相关包：
dnf --disablerepo="*" --enablerepo="elrepo-kernel" list available 

kernel-lt： long term support：长期支持版
kernel-ml： mainline stable： 主线稳定版

# 3、选择自己的版本进行安装,安装最新版
dnf --enablerepo=elrepo-kernel install kernel-ml kernel-ml-devel kernel-ml-headers -y

# 4、重启
shutdown -r now

# 5、查看内核
uname -sr

7、开启IPVS模块、内核优化

cat > /etc/modules-load.d/ipvs.conf <<EOF
#!/bin/bash
ip_vs
ip_vs_lc
ip_vs_lblc
ip_vs_lblcr
ip_vs_rr
ip_vs_wrr
ip_vs_sh
ip_vs_dh
ip_vs_fo
ip_vs_nq
ip_vs_sed
ip_vs_ftp
ip_vs_sh
ip_tables
ip_set
ipt_set
ipt_rpfilter
ipt_REJECT
ipip
xt_set
br_netfilter
nf_conntrack
overlay
EOF
systemctl enable systemd-modules-load.service && systemctl restart systemd-modules-load.service
lsmod | grep -e ip_vs -e nf_conntrack


https://cloud.tencent.com/developer/article/1661160		# ulimit -a 每个参数解释
cat >> /etc/security/limits.conf << 'EOF'
* soft nproc 65535
* hard nproc 130070
* soft nofile 65535
* hard nofile 130070
* soft memlock unlimited
* hard memlock unlimited
EOF


https://developer.aliyun.com/article/718976		# 阿里云优化建议
cat >> /etc/sysctl.conf << 'EOF'
fs.file-max = 2097152
# 减少swap使用，默认是60、0表示禁止
vm.swappiness = 0
# 设置为1，内核允许分配所有的物理内存,Redis常用
vm.overcommit_memory = 1

fs.inotify.max_user_instances = 524288
fs.inotify.max_user_watches = 524288

net.bridge.bridge-nf-call-iptables = 1
net.bridge.bridge-nf-call-ip6tables = 1

net.nf_conntrack_max = 2097152
net.netfilter.nf_conntrack_tcp_timeout_established = 300
net.netfilter.nf_conntrack_max = 1048576
net.netfilter.nf_conntrack_tcp_timeout_close_wait = 60
net.netfilter.nf_conntrack_tcp_timeout_fin_wait = 120
net.netfilter.nf_conntrack_tcp_timeout_time_wait = 120
net.netfilter.nf_conntrack_buckets = 655360
net.ipv4.conf.default.forwarding = 1

# 开启系统路由转发功能
net.ipv4.ip_forward = 1
net.ipv4.neigh.default.gc_thresh1 = 1024
net.ipv4.neigh.default.gc_thresh2 = 4096
net.ipv4.neigh.default.gc_thresh3 = 8192
# 设置为1
net.ipv4.tcp_no_metrics_save = 1 
# 设置为1，防止 SYNC FLOOD 攻击
net.ipv4.tcp_syncookies = 1 
# TIME_WAIT socket的最大数目，不宜太大或者太小，nginx反向代理必备
net.ipv4.tcp_max_tw_buckets = 50000
# 打开 SACK 选项，设置为1
net.ipv4.tcp_sack = 1
# 激活窗口扩充因子，支持64kb以上数据传输
net.ipv4.tcp_window_scaling = 1 
# TCP 缓冲区内存，连接数达到非常高时候需要配置好
net.ipv4.tcp_mem = 786432 2097152 3145728  
net.ipv4.tcp_rmem = 4096 4096 16777216
net.ipv4.tcp_wmem = 4096 4096 16777216 
# 不属于任何进程的socket数目，不宜太大，防止攻击
net.ipv4.tcp_max_orphans = 65535 
# SYNC等待队列长度，适当，太大了排队也没用
net.ipv4.tcp_max_syn_backlog = 65535 
# 禁用timestamp，重要，高并发下设置为0
net.ipv4.tcp_timestamps = 0 
# 发送 SYNC+ACK 的重试次数，不宜太大，5以内
net.ipv4.tcp_synack_retries = 1
# 发送SYNC的重试次数，不宜太大，5以内
net.ipv4.tcp_syn_retries = 1 
# 服务端主动关闭后，客户端释放连接的超时，重要，<30
net.ipv4.tcp_fin_timeout = 5
# 允许TCP保持的空闲keepalive时长，不需要太长
net.ipv4.tcp_keepalive_time = 30
# 系统作为TCP客户端连接自动使用的端口(start，end），可发起并发连接数为end-start
net.ipv4.ip_local_port_range = 10240 65535
# 允许重用TCP连接，重要，必须为1
net.ipv4.tcp_tw_reuse = 1

# 禁用 sysrq 功能
kernel.sysrq = 0 
# 控制 core 文件的文件名中是否添加 pid 作为扩展
kernel.core_uses_pid = 1 
# 消息队列的最大消息大小，默认8k，建议64kb
kernel.msgmax = 65536
# 消息队列存放消息的总字节数
kernel.msgmnb = 163840 

# socket缓冲区默认值和最大值
net.core.wmem_default = 8388608
net.core.rmem_default = 8388608
net.core.rmem_max = 16777216
net.core.wmem_max = 16777216 
# ACCEPT等待队列长度，适当，太大了堆积也无用 
net.core.netdev_max_backlog = 65535 
# 允许最大并发连接数，重要
net.core.somaxconn = 65535 
EOF
sysctl -p

cat >> /etc/systemd/system.conf << 'EOF'
DefaultLimitNOFILE=1024000
DefaultLimitNPROC=1024000
EOF

二、实验步骤：

1、安装Keepalived+Nginx

在Master上安装

 dnf install epel-release -y
 dnf install nginx keepalived -y

1.1、nginx配置文件（主/备一样）

cp /etc/nginx/nginx.conf{,.bak}
cat > /etc/nginx/nginx.conf << 'EOF'
user nginx;
worker_processes auto;
pid /var/run/nginx.pid;

include /usr/share/nginx/modules/*.conf;

worker_rlimit_nofile 1024;
events {
		use epoll;
    worker_connections 1024;
}

http {
    log_format  main  '$remote_addr - $remote_user [$time_local] "$request" '
                      '$status $body_bytes_sent "$http_referer" '
                      '"$http_user_agent" "$http_x_forwarded_for"';

    sendfile            on;
    tcp_nopush          on;
    tcp_nodelay         on;
    keepalive_timeout   65;
    types_hash_max_size 2048;

    include             /etc/nginx/mime.types;
    default_type        application/octet-stream;
}

# 四层负载均衡，为三台Master apiserver组件提供负载均衡
stream {

    log_format  main  '$remote_addr $upstream_addr - [$time_local] $status $upstream_bytes_sent';

    access_log  /var/log/nginx/k8s-access.log  main;
	  error_log /var/log/nginx/k8s-error.log error;
	
    upstream k8s-apiserver {
       server 172.16.3.225:6443;   # Master1 APISERVER IP:PORT
       server 172.16.3.226:6443;   # Master2 APISERVER IP:PORT
       server 172.16.3.227:6443;   # Master3 APISERVER IP:PORT
    }

    server {
       listen 16443;  # 由于nginx与master节点复用，这个监听端口不能是6443，否则会冲突
       proxy_pass k8s-apiserver;
    }
}
EOF

1.2、keepalived配置文件（Nginx Master）

172.16.3.225 配置

cp /etc/keepalived/keepalived.conf{,.bak}
cat > /etc/keepalived/keepalived.conf << 'EOF'
global_defs { 
   notification_email { 
     acassen@firewall.loc 
     failover@firewall.loc 
     sysadmin@firewall.loc 
   } 
   notification_email_from Alexandre.Cassen@firewall.loc  
   smtp_server 127.0.0.1 
   smtp_connect_timeout 30 
   router_id NGINX_MASTER
} 

vrrp_script check_nginx {
    script "/etc/keepalived/check_nginx.sh"
    interval 2   # 脚本执行间隔，每2s检测一次
}

vrrp_instance VI_1 { 
    state MASTER 
    interface ens192  # 修改为实际网卡名
    virtual_router_id 51 # VRRP 路由 ID实例，每个实例是唯一的
    priority 100    # 优先级，备服务器设置低于100
    advert_int 1    # 指定VRRP 心跳包通告间隔时间，默认1秒 
    authentication { 
        auth_type PASS      
        auth_pass 1111 
    }  
    # 虚拟IP
    virtual_ipaddress { 
        172.16.3.254/21
    } 
    track_script {
        check_nginx
    } 
}
EOF

vrrp_script：指定检查nginx工作状态脚本（根据nginx状态判断是否故障转移）
virtual_ipaddress：虚拟IP（VIP）

准备上述配置文件中检查nginx运行状态的脚本：

cat > /etc/keepalived/check_nginx.sh  << 'EOF'
#!/bin/bash
count=$(ss -antp |grep 16443 |egrep -cv "grep|$$")

if [ "$count" -eq 0 ];then
#    exit 1
    systemctl stop keepalived.service
else
    exit 0
fi
EOF
chmod +x /etc/keepalived/check_nginx.sh

1.3、keepalived配置文件（Nginx Backup）

172.16.3.226 配置

cat > /etc/keepalived/keepalived.conf << EOF
global_defs { 
   notification_email { 
     acassen@firewall.loc 
     failover@firewall.loc 
     sysadmin@firewall.loc 
   } 
   notification_email_from Alexandre.Cassen@firewall.loc  
   smtp_server 127.0.0.1 
   smtp_connect_timeout 30 
   router_id NGINX_BACKUP
} 

vrrp_script check_nginx {
    script "/etc/keepalived/check_nginx.sh"
    interval 2   # 脚本执行间隔，每2s检测一次
}

vrrp_instance VI_1 { 
    state BACKUP 
    interface ens192
    virtual_router_id 51 # VRRP 路由 ID实例，每个实例是唯一的 
    priority 90
    advert_int 1
    authentication { 
        auth_type PASS      
        auth_pass 1111 
    }  
    virtual_ipaddress { 
        172.16.3.254/21
    } 
    track_script {
        check_nginx
    } 
}
EOF

准备上述配置文件中检查nginx运行状态的脚本：

cat > /etc/keepalived/check_nginx.sh  << "EOF"
#!/bin/bash
count=$(ss -antp |grep 16443 |egrep -cv "grep|$$")

if [ "$count" -eq 0 ];then
#    exit 1
		systemctl stop keepalived.service
else
    exit 0
fi
EOF
chmod +x /etc/keepalived/check_nginx.sh

注：keepalived根据脚本返回状态码（0为工作正常，非0不正常）判断是否故障转移。

1.4、keepalived配置文件（Nginx Backup）

172.16.3.227 配置

cat > /etc/keepalived/keepalived.conf << EOF
global_defs { 
   notification_email { 
     acassen@firewall.loc 
     failover@firewall.loc 
     sysadmin@firewall.loc 
   } 
   notification_email_from Alexandre.Cassen@firewall.loc  
   smtp_server 127.0.0.1 
   smtp_connect_timeout 30 
   router_id NGINX_BACKUP
} 

vrrp_script check_nginx {
    script "/etc/keepalived/check_nginx.sh"
    interval 2   # 脚本执行间隔，每2s检测一次
}

vrrp_instance VI_1 { 
    state BACKUP 
    interface ens192
    virtual_router_id 51 # VRRP 路由 ID实例，每个实例是唯一的 
    interval 2   # 脚本执行间隔，每2s检测一次
    weight -20    # 脚本结果导致的优先级变更，检测失败（脚本返回非0）则优先级 -5
    priority 80
    advert_int 1
    authentication { 
        auth_type PASS      
        auth_pass 1111 
    }  
    virtual_ipaddress { 
        172.16.3.254/21
    } 
    track_script {
        check_nginx
    } 
}
EOF

准备上述配置文件中检查nginx运行状态的脚本：

cat > /etc/keepalived/check_nginx.sh  << "EOF"
#!/bin/bash
count=$(ss -antp |grep 16443 |egrep -cv "grep|$$")

if [ "$count" -eq 0 ];then
		systemctl stop keepalived.service
else
    exit 0
fi
EOF
chmod +x /etc/keepalived/check_nginx.sh

注：keepalived根据脚本返回状态码（0为工作正常，非0不正常）判断是否故障转移

1.5、启动并设置开机启动

systemctl daemon-reload
systemctl enable nginx --now
systemctl enable keepalived --now

systemctl status nginx
systemctl status keepalived

2、安装Containerd

所有主机安装、这里我用的是清华源

yum-config-manager --add-repo https://download.docker.com/linux/centos/docker-ce.repo
sudo sed -i 's+download.docker.com+mirrors.tuna.tsinghua.edu.cn/docker-ce+' /etc/yum.repos.d/docker-ce.repo
dnf install containerd.io -y

2.1、配置Containerd

containerd config default > /etc/containerd/config.toml	  # 导出Containerd默认配置文件
sed -i "s#/var/lib/containerd#/data/containerd#" /etc/containerd/config.toml
sed -i "s#/run/containerd#/data/containerd/state#" /etc/containerd/config.toml
sed -i "s#/data/containerd/state/containerd.sock#/run/containerd/containerd.sock#" /etc/containerd/config.toml
sed -i "s#/opt/containerd#/data/containerd/containers#" /etc/containerd/config.toml
sed -i 's#k8s.gcr.io#registry.cn-hangzhou.aliyuncs.com/google_containers#' /etc/containerd/config.toml
sed -i 's#SystemdCgroup = false#SystemdCgroup = true#' /etc/containerd/config.toml

cat > /etc/crictl.yaml << 'EOF'
runtime-endpoint: unix:///run/containerd/containerd.sock
image-endpoint: unix:///run/containerd/containerd.sock
timeout: 10    # 超时时间
debug: false   # debug是否输出debug信息
EOF
mkdir /data
systemctl enable containerd --now
systemctl status containerd

3、安装Kubernetes

所有主机执行、这里我用的是清华源

cat > /etc/yum.repos.d/kubernetes.repo << 'EOF'
[kubernetes]
name=kubernetes
baseurl=https://mirrors.tuna.tsinghua.edu.cn/kubernetes/yum/repos/kubernetes-el7-$basearch
enabled=1
EOF
dnf install -y --nogpgcheck kubelet kubeadm kubectl
systemctl enable kubelet --now

3.1、Kubernetes集群初始化准备

172.16.3.225上执行

kubeadm config print init-defaults > kubeadm-init.yaml
cat > 'kubeadm-init.yaml' << 'EOF'
apiVersion: kubeadm.k8s.io/v1beta3
bootstrapTokens:
- groups:
  - system:bootstrappers:kubeadm:default-node-token
  token: abcdef.0123456789abcdef
  ttl: 24h0m0s
  usages:
  - signing
  - authentication
kind: InitConfiguration
localAPIEndpoint:
  advertiseAddress: 172.16.3.225    # 修改成本机IP
  bindPort: 6443
nodeRegistration:
  criSocket: unix:///var/run/containerd/containerd.sock
  imagePullPolicy: IfNotPresent
  name: k8s-master01    # 修改成本机名字
  taints: null
---
apiServer:
  timeoutForControlPlane: 4m0s
apiVersion: kubeadm.k8s.io/v1beta3
certificatesDir: /etc/kubernetes/pki
clusterName: kubernetes
controlPlaneEndpoint: 172.16.3.254:16443    # 新增写自己的VIP,以及负载均衡端口
controllerManager: {}
dns: {}
etcd:
  local:
    dataDir: /var/lib/etcd   # etcd数据存放位置
imageRepository: registry.cn-hangzhou.aliyuncs.com/google_containers    # 指定阿里云镜像
kind: ClusterConfiguration
kubernetesVersion: 1.25.2    # 修改成自己Kubernetes版本
networking:
  dnsDomain: cluster.local
  podSubnet: 10.244.0.0/16    # 新增Pod地址
  serviceSubnet: 10.96.0.0/12
scheduler: {}
# 新增如下内容： 开启Kube-Proxy IPVS模块,默认是iptables
---
apiVersion: kubeproxy.config.k8s.io/v1alpha1
kind: KubeProxyConfiguration
mode: ipvs
EOF

kubeadm config images pull --config=kubeadm-init.yaml			# 下载镜像
kubeadm init --config kubeadm-init.yaml | tee kubeadm-init.log		# 初始化集群

以下内容是初始化输出的流程：

[init] Using Kubernetes version: v1.25.2
[preflight] Running pre-flight checks
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'
[certs] Using certificateDir folder "/etc/kubernetes/pki"
[certs] Generating "ca" certificate and key
[certs] Generating "apiserver" certificate and key
[certs] apiserver serving cert is signed for DNS names [k8s-master01 kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 172.16.3.225 172.16.3.254]
[certs] Generating "apiserver-kubelet-client" certificate and key
[certs] Generating "front-proxy-ca" certificate and key
[certs] Generating "front-proxy-client" certificate and key
[certs] Generating "etcd/ca" certificate and key
[certs] Generating "etcd/server" certificate and key
[certs] etcd/server serving cert is signed for DNS names [k8s-master01 localhost] and IPs [172.16.3.225 127.0.0.1 ::1]
[certs] Generating "etcd/peer" certificate and key
[certs] etcd/peer serving cert is signed for DNS names [k8s-master01 localhost] and IPs [172.16.3.225 127.0.0.1 ::1]
[certs] Generating "etcd/healthcheck-client" certificate and key
[certs] Generating "apiserver-etcd-client" certificate and key
[certs] Generating "sa" key and public key
[kubeconfig] Using kubeconfig folder "/etc/kubernetes"
W0929 15:46:26.363353   15180 endpoint.go:57] [endpoint] WARNING: port specified in controlPlaneEndpoint overrides bindPort in the controlplane address
[kubeconfig] Writing "admin.conf" kubeconfig file
W0929 15:46:26.523144   15180 endpoint.go:57] [endpoint] WARNING: port specified in controlPlaneEndpoint overrides bindPort in the controlplane address
[kubeconfig] Writing "kubelet.conf" kubeconfig file
W0929 15:46:26.745022   15180 endpoint.go:57] [endpoint] WARNING: port specified in controlPlaneEndpoint overrides bindPort in the controlplane address
[kubeconfig] Writing "controller-manager.conf" kubeconfig file
W0929 15:46:27.021676   15180 endpoint.go:57] [endpoint] WARNING: port specified in controlPlaneEndpoint overrides bindPort in the controlplane address
[kubeconfig] Writing "scheduler.conf" kubeconfig file
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Starting the kubelet
[control-plane] Using manifest folder "/etc/kubernetes/manifests"
[control-plane] Creating static Pod manifest for "kube-apiserver"
[control-plane] Creating static Pod manifest for "kube-controller-manager"
[control-plane] Creating static Pod manifest for "kube-scheduler"
[etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests"
[wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory "/etc/kubernetes/manifests". This can take up to 4m0s
[apiclient] All control plane components are healthy after 11.528231 seconds
[upload-config] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
[kubelet] Creating a ConfigMap "kubelet-config" in namespace kube-system with the configuration for the kubelets in the cluster
[upload-certs] Skipping phase. Please see --upload-certs
[mark-control-plane] Marking the node k8s-master01 as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]
[mark-control-plane] Marking the node k8s-master01 as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]
[bootstrap-token] Using token: abcdef.0123456789abcdef
[bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles
[bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes
[bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
[bootstrap-token] Creating the "cluster-info" ConfigMap in the "kube-public" namespace
[kubelet-finalize] Updating "/etc/kubernetes/kubelet.conf" to point to a rotatable kubelet client certificate and key
W0929 15:46:42.544999   15180 endpoint.go:57] [endpoint] WARNING: port specified in controlPlaneEndpoint overrides bindPort in the controlplane address
[addons] Applied essential addon: CoreDNS
[addons] Applied essential addon: kube-proxy

Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

Alternatively, if you are the root user, you can run:

  export KUBECONFIG=/etc/kubernetes/admin.conf

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

You can now join any number of control-plane nodes by copying certificate authorities
and service account keys on each node and then running the following as root:

  kubeadm join 172.16.3.254:16443 --token abcdef.0123456789abcdef \
	--discovery-token-ca-cert-hash sha256:872c34cc291025d258f6dc10de3f1789086f2d82a2a2156806b16ded736e62de \
	--control-plane 

Then you can join any number of worker nodes by running the following on each as root:

kubeadm join 172.16.3.254:16443 --token abcdef.0123456789abcdef \
	--discovery-token-ca-cert-hash sha256:419e25aa5089819dc6cdae3996b92e950e28504ecdd33bdca230ec5379731764 
	

在所有Master上执行：
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config

以下节点加入角色Master执行：
kubeadm join 172.16.3.254:16443 --token abcdef.0123456789abcdef \
	--discovery-token-ca-cert-hash sha256:872c34cc291025d258f6dc10de3f1789086f2d82a2a2156806b16ded736e62de \
	--control-plane 

以下节点加入角色Node执行：
kubeadm join 172.16.3.254:16443 --token abcdef.0123456789abcdef \
	--discovery-token-ca-cert-hash sha256:419e25aa5089819dc6cdae3996b92e950e28504ecdd33bdca230ec5379731764

3.2、如果在加入集群出错执行以下步骤

报错内容：
[failure loading certificate for CA: couldn't load the certificate file /etc/kubernetes/pki/ca.crt: open /etc/kubernetes/pki/ca.crt: no such file or directory, failure loading key for service account: couldn't load the private key file /etc/kubernetes/pki/sa.key: open /etc/kubernetes/pki/sa.key: no such file or directory, failure loading certificate for front-proxy CA: couldn't load the certificate file /etc/kubernetes/pki/front-proxy-ca.crt: open /etc/kubernetes/pki/front-proxy-ca.crt: no such file or directory, failure loading certificate for etcd CA: couldn't load the certificate file /etc/kubernetes/pki/etcd/ca.crt: open /etc/kubernetes/pki/etcd/ca.crt: no such file or directory]

cd /etc/kubernetes && tar -zcf k8s-key.tar.gz admin.conf pki/ca.* pki/sa.* pki/front-proxy-ca.* pki/etcd/ca.*

scp /etc/kubernetes/k8s-key.tar.gz k8s-master02:/etc/kubernetes
scp /etc/kubernetes/k8s-key.tar.gz k8s-master03:/etc/kubernetes

另外两台Master压缩证书，再次加入进去测试；

4、安装Calico网络

在Master01上执行

kubectl get no	# 查看Node状态都是NotReady是因为网络查件没有准备就绪
NAME           STATUS     ROLES           AGE     VERSION
k8s-master01   NotReady   control-plane   5m54s   v1.25.2
k8s-master02   NotReady   control-plane   4m13s   v1.25.2
k8s-master03   NotReady   control-plane   4m14s   v1.25.2
k8s-node01     NotReady   <none>          2m40s   v1.25.2

wget https://projectcalico.docs.tigera.io/manifests/calico.yaml
修改CALICO_IPV4POOL_CIDR，改成自己设置的pod地址范围，注意缩进
4551             - name: CALICO_IPV4POOL_CIDR
4552               value: "10.244.0.0/16"
kubectl apply -f calico.yaml

kubectl get po -A	# 耐心等待所有容器变成Running状态
kubectl get no
NAME           STATUS   ROLES           AGE   VERSION
k8s-master01   Ready    control-plane   13m   v1.25.2
k8s-master02   Ready    control-plane   12m   v1.25.2
k8s-master03   Ready    control-plane   12m   v1.25.2
k8s-node01     Ready    <none>          10m   v1.25.2

5、配置Kubernetes Tables功能

cat >> ~/.bashrc << 'EOF'
source /usr/share/bash-completion/bash_completion
source <(kubectl completion bash)
EOF
source ~/.bashrc

三、测试一下Kubernetes是否正常

cat > myapp.yaml << 'EOF'
apiVersion: apps/v1
kind: Deployment
metadata:
  name:  myapp
  namespace: default
spec:
  selector:
    matchLabels:
      app: myapp
  replicas: 5
  template:
    metadata:
      labels:
        app:  myapp
    spec:
      containers:
      - name:  myapp
        image:  hetaotao/myapp:v1
        ports:
        - containerPort:  80
          name:  myapp
        volumeMounts:
        - name: localtime
          mountPath: /etc/localtime
      volumes:
        - name: localtime
          hostPath:
            path: /usr/share/zoneinfo/Asia/Shanghai
      restartPolicy: Always
---
apiVersion: v1
kind: Service
metadata:
  name: myapp
  namespace: default
spec:
  selector:
    app: myapp
  type: NodePort
  ports:
  - name: myapp
    protocol: TCP
    port: 80
    targetPort: 80
EOF

四、扩展知识：

1、部署Ingress

参考地址：https://github.com/kubernetes/ingress-nginx
ingress详细配置可以参考：https://blog.csdn.net/qq_43164571/article/details/113500975

wget https://ghproxy.com/https://raw.githubusercontent.com/kubernetes/ingress-nginx/main/deploy/static/provider/baremetal/deploy.yaml

grep "image:" deploy.yaml 	# 将Yaml文件的镜像修改地址成国内的
    image: lank8s.cn/ingress-nginx/controller:v1.3.1
    image: lank8s.cn/ingress-nginx/kube-webhook-certgen:v1.3.0
    image: lank8s.cn/ingress-nginx/kube-webhook-certgen:v1.3.0

kubectl get po,svc -n ingress-nginx 
NAME                                            READY   STATUS      RESTARTS   AGE
pod/ingress-nginx-admission-create-z844l        0/1     Completed   0          73s
pod/ingress-nginx-admission-patch-2x2sq         0/1     Completed   0          73s
pod/ingress-nginx-controller-554f784744-g7zp6   1/1     Running     0          73s

NAME                                         TYPE        CLUSTER-IP      EXTERNAL-IP   PORT(S)                      AGE
service/ingress-nginx-controller             NodePort    10.104.115.74   <none>        80:31743/TCP,443:32008/TCP   73s
service/ingress-nginx-controller-admission   ClusterIP   10.97.58.184    <none>        443/TCP                      73s

2、部署个Pod 测试一下网络以及Ingress是否正常

cat > nginx.yaml << 'EOF'
apiVersion: apps/v1
kind: Deployment
metadata:
  name:  nginx
  namespace: default
spec:
  selector:
    matchLabels:
      app: nginx
  replicas: 2
  template:
    metadata:
      labels:
        app:  nginx
    spec:
      containers:
      - name:  nginx
        image:  nginx:latest
        ports:
        - containerPort:  80
          name:  nginx
        volumeMounts:
        - name: localtime
          mountPath: /etc/localtime
      volumes:
        - name: localtime
          hostPath:
            path: /usr/share/zoneinfo/Asia/Shanghai
      restartPolicy: Always
---
apiVersion: v1
kind: Service
metadata:
  name: nginx
  namespace: default
spec:
  selector:
    app: nginx
  type: ClusterIP
  ports:
  - name: nginx
    protocol: TCP
    port: 80
    targetPort: 80
---
apiVersion: networking.k8s.io/v1
kind: Ingress
metadata:
  name: nginx
  namespace: default
spec:
  ingressClassName: nginx
  rules:
  - host: foo.bar.com
    http:
      paths:
      - path: /
        pathType: Prefix
        backend:
          service:
            name: nginx
            port:
              number: 80
EOF

测试一下Nginx Pod是否正常

kubectl get po,svc,ingress
NAME                         READY   STATUS    RESTARTS   AGE
pod/nginx-8456669dfb-678d9   1/1     Running   0          67s

NAME                 TYPE        CLUSTER-IP       EXTERNAL-IP   PORT(S)   AGE
service/kubernetes   ClusterIP   10.96.0.1        <none>        443/TCP   28m
service/nginx        ClusterIP   10.106.188.230   <none>        80/TCP    67s

NAME                              CLASS   HOSTS         ADDRESS   PORTS   AGE
ingress.networking.k8s.io/nginx   nginx   foo.bar.com             80      67s

curl -l http://foo.bar.com:31743/

3、Kubelet 优化资源预留

[root@k8s-master ~]# ps -ef | grep kubelet
root     2035781       1  4 12:59 ?        00:01:45 /usr/bin/kubelet --bootstrap-kubeconfig=/etc/kubernetes/bootstrap-kubelet.conf --kubeconfig=/etc/kubernetes/kubelet.conf --config=/var/lib/kubelet/config.yaml --network-plugin=cni --pod-infra-container-image=registry.cn-hangzhou.aliyuncs.com/google_containers/pause:3.4.1

[root@k8s-master ~]# vim /var/lib/kubelet/kubeadm-flags.env 
KUBELET_KUBEADM_ARGS="--network-plugin=cni --pod-infra-container-image=registry.cn-hangzhou.aliyuncs.com/google_containers/pause:3.4.1 --kube-reserved=cpu=1,memory=256Mi --system-reserved=cpu=1,memory=256Mi --max-pods=600"

[root@k8s-master ~]# systemctl daemon-reload && systemctl restart kubelet
[root@k8s-master ~]# ps -ef | grep kubelet
root     2035781       1  4 12:59 ?        00:01:47 /usr/bin/kubelet --bootstrap-kubeconfig=/etc/kubernetes/bootstrap-kubelet.conf --kubeconfig=/etc/kubernetes/kubelet.conf --config=/var/lib/kubelet/config.yaml --network-plugin=cni --pod-infra-container-image=registry.cn-hangzhou.aliyuncs.com/google_containers/pause:3.4.1 --kube-reserved=cpu=1,memory=256Mi --system-reserved=cpu=1,memory=256Mi --max-pods=600

–kube-reserved=cpu=1,memory=256Mi # 指定 Kubelet 预留的 CPU 和内存资源，以供 Kubernetes 系统组件使用。

–system-reserved=cpu=1,memory=256Mi # 指定 Kubelet 预留的 CPU 和内存资源，以供系统进程使用。

–max-pods=600 # 指定节点上最多可运行的 Pod 数量，默认是110

更多参数可以查看 kubelet --help

运维生涯记录

关注

2
点赞
踩
8

收藏

觉得还不错? 一键收藏
打赏
2
评论
Kubernetes 1.25 集群搭建

注：keepalived根据脚本返回状态码（0为工作正常，非0不正常）判断是否故障转移。注：keepalived根据脚本返回状态码（0为工作正常，非0不正常）判断是否故障转移。：这里的所有操作每个主机都得执行；
复制链接

扫一扫