华为路由器常用命令

Liufei]display version       ;显示版本信息
[Liufei]display current-configuration       ;显示当前配置
[Liufei]display interfaces       ;显示接口信息
[Liufei]display ip route       ;显示路由信息
[Liufei]sysname lf123       ;更改主机名
[Liufei]super passwrod 123456       ;设置口令
[Liufei]interface serial0       ;进入接口
[Liufei-serial0]ip address ;配置端口IP地址
[Liufei-serial0]undo shutdown       ;激活端口
[Liufei]link-protocol hdlc       ;绑定hdlc协议
[Liufei]user-interface vty 0 4
[Liufei-ui-vty0-4]authentication-mode password
[Liufei-ui-vty0-4]set authentication-mode password simple 222
[Liufei-ui-vty0-4]user privilege level 3
[Liufei-ui-vty0-4]quit
[Liufei]debugging hdlc all serial0       ;显示所有信息
[Liufei]debugging hdlc event serial0       ;调试事件信息
[Liufei]debugging hdlc packet serial0       ;显示包的信息
静态路由:
[Liufei]ip route-static {interface number|nexthop}[value][reject|blackhole]
例如:
[Liufei]ip route-static 129.1.0.0 16 10.0.0.2
[Liufei]ip route-static 129.1.0.0 255.255.0.0 10.0.0.2
[Liufei]ip route-static 129.1.0.0 16 Serial 2
[Liufei]ip route-static 0.0.0.0 0.0.0.0 10.0.0.2
动态路由:
[Liufei]rip ;设置动态路由
[Liufei]rip work ;设置工作允许
[Liufei]rip input ;设置入口允许
[Liufei]rip output ;设置出口允许
[Liufei-rip]network 1.0.0.0       ;设置交换路由网络
[Liufei-rip]network all ;设置与所有网络交换
[Liufei-rip]peer ip-address ;
[Liufei-rip]summary ;路由聚合
[Liufei]rip version 1 ;设置工作在版本1
[Liufei]rip version 2 multicast ;设版本2,多播方式
[Liufei-Ethernet0]rip split-horizon ;水平分隔
[Liufei]router id A.B.C.D ;配置路由器的ID
[Liufei]ospf enable ;启动OSPF协议
[Liufei-ospf]import-route direct ;引入直联路由
[Liufei-Serial0]ospf enable area ;配置OSPF区域
标准访问列表命令格式如下:
acl [match-order config|auto] ;默认前者顺序匹配。
rule [normal|special]{permit|deny} [source source-addr source-wildcard|any]
例:
[Liufei]acl 10
[Liufei-acl-10]rule normal permit source 10.0.0.0 0.0.0.255
[Liufei-acl-10]rule normal deny source any
扩展访问控制列表配置命令
配置TCP/UDP协议的扩展访问列表:
rule {normal|special}{permit|deny}{tcp|udp}source {|any}destination |any}
[operate]
配置ICMP协议的扩展访问列表:
rule {normal|special}{permit|deny}icmp source {|any]destination {|any]
[icmp-code] [logging]
扩展访问控制列表操作符的含义
equal portnumber ;等于
greater-than portnumber ;大于
less-than portnumber ;小于
not-equal portnumber ;不等
range portnumber1 portnumber2 ;区间
扩展访问控制列表举例
[Liufei]acl 101
[Liufei-acl-101]rule deny souce any destination any
[Liufei-acl-101]rule permit icmp source any destination any icmp-type echo
[Liufei-acl-101]rule permit icmp source any destination any icmp-type echo-reply
[Liufei]acl 102
[Liufei-acl-102]rule permit ip source 10.0.0.1 0.0.0.0 destination 202.0.0.1 0.0.0.0
[Liufei-acl-102]rule deny ip source any destination any
[Liufei]acl 103
[Liufei-acl-103]rule permit tcp source any destination 10.0.0.1 0.0.0.0 destination-port equal ftp
[Liufei-acl-103]rule permit tcp source any destination 10.0.0.2 0.0.0.0 destination-port equal www
[Liufei]firewall enable
[Liufei]firewall default permit|deny
[Liufei]int e0
[Liufei-Ethernet0]firewall packet-filter 101 inbound|outbound
地址转换配置举例
[Liufei]firewall enable
[Liufei]firewall default permit
[Liufei]acl 101 ;内部指定主机可以进入e0
[Liufei-acl-101]rule deny ip source any destination any
[Liufei-acl-101]rule permit ip source 129.38.1.1 0 destination any
[Liufei-acl-101]rule permit ip source 129.38.1.2 0 destination any
[Liufei-acl-101]rule permit ip source 129.38.1.3 0 destination any
[Liufei-acl-101]rule permit ip source 129.38.1.4 0 destination any
[Liufei-acl-101]quit
[Liufei]int e0
[Liufei-Ethernet0]firewall packet-filter 101 inbound
[Liufei]acl 102 ;外部特定主机和大于1024端口的数据包允许进入S0
[Liufei-acl-102]rule deny ip source any destination any
[Liufei-acl-102]rule permit tcp source 202.39.2.3 0 destination 202.38.160.1 0
[Liufei-acl-102]rule permit tcp source any destination 202.38.160.1 0 destination-port great-than
1024
[Liufei-acl-102]quit
[Liufei]int s0
[Liufei-Serial0]firewall packet-filter 102 inbound ;设202.38.160.1是路由器出口IP。
[Liufei-Serial0]nat outbound 101 interface ;是Easy ip,将acl 101允许的IP从本接口出时变换源地址。
内部服务器地址转换配置命令(静态nat):
nat server global [port] inside port [protocol] ;global_port不写时使用inside_port
[Liufei-Serial0]nat server global 202.38.160.1 inside 129.38.1.1 ftp tcp
[Liufei-Serial0]nat server global 202.38.160.1 inside 129.38.1.2 telnet tcp
[Liufei-Serial0]nat server global 202.38.160.1 inside 129.38.1.3 www tcp
设有公网IP:202.38.160.101~202.38.160.103 可以使用。 ;对外访问(原例题)
[Liufei]nat address-group 202.38.160.101 202.38.160.103 pool1 ;建立地址池
[Liufei]acl 1
[Liufei-acl-1]rule permit source 10.110.10.0 0.0.0.255 ;指定允许的内部网络
[Liufei-acl-1]rule deny source any
[Liufei-acl-1]int serial 0
[Liufei-Serial0]nat outbound 1 address-group pool1 ;在s0口从地址池取出IP对外访问
[Liufei-Serial0]nat server global 202.38.160.101 inside 10.110.10.1 ftp tcp
[Liufei-Serial0]nat server global 202.38.160.102 inside 10.110.10.2 www tcp
[Liufei-Serial0]nat server global 202.38.160.102 8080 inside 10.110.10.3 www tcp
[Liufei-Serial0]nat server global 202.38.160.103 inside 10.110.10.4 smtp udp
PPP设置:
[Liufei-s0]link-protocol ppp ;默认的协议
PPP验证:
主验方:pap|chap
[Liufei]local-user q2 password {simple|cipher} hello ;路由器1
[Liufei]interface serial 0
[Liufei-serial0]ppp authentication-mode {pap|chap}
[Liufei-serial0]ppp chap user q1 ;pap时,没有此句
pap被验方:
[Liufei]interface serial 0 ;路由器2
[Liufei-serial0]ppp pap local-user q2 password {simple|cipher} hello
chap被验方:
[Liufei]interface serial 0 ;路由器2
[Liufei-serial0]ppp chap user q2 ;自己路由器名
[Liufei-serial0]local-user q1 password {simple|cipher} hello ;对方路由器名
帧中继frame-relay (二分册6-61)
[q1]fr switching
[q1]int s1
[q1-Serial1]ip address 192.168.34.51 255.255.255.0
[q1-Serial1]link-protocol fr ;封装帧中继协议
[q1-Serial1]fr interface-type dce
[q1-Serial1]fr dlci 100
[q1-Serial1]fr inarp
[q1-Serial1]fr map ip 192.168.34.52 dlci 100
[q2]int s1
[q2-Serial1]ip address 192.168.34.52 255.255.255.0
[q2-Serial1]link-protocol fr
[q2-Serial1]fr interface-type dte
[q2-Serial1]fr dlci 100
[q2-Serial1]fr inarp
[q2-Serial1]fr map ip 192.168.34.51 dlci 100
帧中继监测
[q1]display fr lmi-info[]interface type number]
[q1]display fr map
[q1]display fr pvc-info[serial interface-number][dlci dlci-number]
[q1]display fr dlci-switch
[q1]display fr interface
[q1]reset fr inarp-info
[q1]debugging fr all[interface type number]
[q1]debugging fr arp[interface type number]
[q1]debugging fr event[interface type number]
[q1]debugging fr lmi[interface type number]
启动ftp服务:
[Liufei]local-user ftp password {simple|cipher} aaa service-type ftp
[Liufei]ftp server enable
  • 3
    点赞
  • 25
    收藏
    觉得还不错? 一键收藏
  • 0
    评论

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值