在VMware里克隆出来的redhat linux 6.0,重启网卡报错

最新推荐文章于 2023-01-11 16:48:51 发布

简单爱看大海

最新推荐文章于 2023-01-11 16:48:51 发布

阅读量172

点赞数

文章标签： vmware 运维服务器

本文链接：https://blog.csdn.net/qq_43672733/article/details/113096195

版权

在VMware中克隆的RedHatLinux6.0遇到重启网卡报错，设备eth0无法ping通。解决方法包括：修改/etc/udev/rules.d/70-persistent-net.rules文件，更新网卡MAC地址，然后更改/etc/sysconfig/network-scripts/ifcfg-eth0配置，将DEVICE和HWADDR改为克隆后的MAC地址，最后重启网络服务，恢复正常。

摘要由CSDN通过智能技术生成

在VMware里克隆出来的redhat linux 6.0,重启网卡报错，无法ping通eth0的IP地址。

故障现象：

service network restart
Shutting down loopback insterface: [ OK ]
Bringing up loopback insterface: [ OK ]
Bringing up interface eth0: Device eth0 does not seem to be present,delaying initialization. [FAILED]

CentOS Linux解决Device eth0 does not seem to be present

解决办法：

首先，打开/etc/udev/rules.d/70-persistent-net.rules内容如下面例子所示：

# vi /etc/udev/rules.d/70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:8f:89:9
7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# PCI device 0x1022:0x2000 (pcnet32)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:0c:29:50:bd:1
7", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"

记录下，eth1网卡的mac地址00:0c:29:50:bd:17

接下来，打开/etc/sysconfig/network-scripts/ifcfg-eth0

# vi /etc/sysconfig/network-scripts/ifcfg-eth0

将 DEVICE="eth0" 改成 DEVICE="eth1" ,
将 HWADDR="00:0c:29:8f:89:97" 改成上面的mac地址 HWADDR="00:0c:29:50:bd:17"

最后，重启网络

# service network restart
或者

# /etc/init.d/network restart

重启网卡正常了，ping也正常了。