华为交换机telnet远程登录

基本配置的示例

设置设备名称和管理IP地址。

system-view
[HUAWEI] sysname Server
[Server] vlan 10
[Server-vlan10] quit
[Server] interface vlanif 10 //管理vlan
[Server-Vlanif10] ip address 10.137.217.177 24
[Server-Vlanif10] quit
[Server] interface gigabitethernet 0/0/10
[Server-GigabitEthernet0/0/10] port link-type access
[Server-GigabitEthernet0/0/10] port default vlan 10
[Server-GigabitEthernet0/0/10] quit

假如设备的网关是10.137.217.1，配置设备的缺省路由。

[Server] ip route-static 0.0.0.0 0 10.137.217.1

设置Telnet用户的级别和认证方式。

[Server] telnet server-source -i Vlanif 10 //指定提供telnet服务的源接口
[Server] telnet server enable
[Server] user-interface vty 0 4
[Server-ui-vty0-4] protocol inbound telnet
[Server-ui-vty0-4] authentication-mode aaa
[Server-ui-vty0-4] user privilege level 15
[Server-ui-vty0-4] quit
[Server] aaa
[Server-aaa] local-user admin1234 password irreversible-cipher Helloworld@6789
[Server-aaa] local-user admin1234 privilege level 15
[Server-aaa] local-user admin1234 service-type telnet
[Server-aaa] quit

验证配置是否正常

完成以上配置后，可以从PC2以Telnet方式远程登录
得到如下结果：

telnet 10.137.217.177

Login authentication

Username:admin1234
Password:
Info: The max number of VTY users is 20, and the number
of current VTY users on line is 1.
The current login time is 2012-07-26 20:10:05+08:00.