实验要求
- AS1存在两个环回,一个地址为192.168.1.0/24 ,该地址不能在任何协议中宣告,AS3存在两个环回,一个地址为192.168.2.0/24 ,该地址不能在任何协议中宣告,最终要求这两个环回可以互相通讯;AS1的另一个环回为 10.1.1.0/24 ,AS3的另一个环回为 10.1.2.0/24
- 整个AS2的ip地址为 172.16.0.0. 请合理划分
- AS间的骨干链路IP地址随意定制
- 使用BGP协议让整个网络所有设备的环回可以相互访问
- 减少条目数量,避免环路出现
实验拓扑
实验配置
1.根据实验拓扑为路由器配置接口IP地址以及环回地址
2.在AS2内启动OSPF协议
[R2]ospf 1 router-id 2.2.2.2
[R2-ospf-1]area 0
[R2-ospf-1-area-0.0.0.0]network 172.16.0.1 0.0.0.0
[R2-ospf-1-area-0.0.0.0]network 172.16.32.1 0.0.0.0
[R2-ospf-1-area-0.0.0.0]network 172.16.64.1 0.0.0.0
[R3]ospf 1 router-id 3.3.3.3
[R3-ospf-1]area 0
[R3-ospf-1-area-0.0.0.0]network 172.16.1.1 0.0.0.0
[R3-ospf-1-area-0.0.0.0]network 172.16.64.2 0.0.0.0
[R3-ospf-1-area-0.0.0.0]network 172.16.96.1 0.0.0.0
[R4]ospf 1 router-id 4.4.4.4
[R4-ospf-1]area 0
[R4-ospf-1-area-0.0.0.0]network 172.16.2.1 0.0.0.0
[R4-ospf-1-area-0.0.0.0]network 172.16.96.2 0.0.0.0
[R4-ospf-1-area-0.0.0.0]network 172.16.224.1 0.0.0.0
[R5]ospf 1 router-id 5.5.5.5
[R5-ospf-1]area 0
[R5-ospf-1-area-0.0.0.0]network 172.16.128.1 0.0.0.0
[R5-ospf-1-area-0.0.0.0]network 172.16.32.2 0.0.0.0
[R5-ospf-1-area-0.0.0.0]network 172.16.160.1 0.0.0.0
[R6]ospf 1 router-id 6.6.6.6
[R6-ospf-1]area 0
[R6-ospf-1-area-0.0.0.0]network 172.16.129.1 0.0.0.0
[R6-ospf-1-area-0.0.0.0]network 172.16.160.2 0.0.0.0
[R6-ospf-1-area-0.0.0.0]network 172.16.192.1 0.0.0.0
[R6]ospf 1 router-id 6.6.6.6
[R6-ospf-1]area 0
[R6-ospf-1-area-0.0.0.0]network 172.16.129.1 0.0.0.0
[R6-ospf-1-area-0.0.0.0]network 172.16.160.2 0.0.0.0
display ospf peer brief
用该命令检查建邻的情况
建邻完成后进入下一步的配置
3.启动BGP协议
[R1]bgp 1
[R1-bgp]router-id 1.1.1.1
[R1-bgp]peer 12.1.1.2 as-number 2
[R2]bgp 64512
[R2-bgp]router-id 2.2.2.2
[R2-bgp]confederation id 2
[R2-bgp]confederation peer-as 64513
[R2-bgp]peer 12.1.1.1 as-number 1
[R2-bgp]peer 172.16.1.1 as-number 64512
[R2-bgp]peer 172.16.1.1 connect-interface LoopBack 0
[R2-bgp]peer 172.16.128.1 as-number 64513
[R2-bgp]peer 172.16.128.1 connect-interface LoopBack 0
[R2-bgp]peer 172.16.128.1 ebgp-max-hop 2
[R3]bgp 64512
[R3-bgp]router-id 3.3.3.3
[R3-bgp]confederation id 2
[R3-bgp]peer 172.16.0.1 as-number 64512
[R3-bgp]peer 172.16.0.1 connect-interface LoopBack 0
[R3-bgp]peer 172.16.2.1 as-number 64512
[R3-bgp]peer 172.16.2.1 connect-interface LoopBack 0
[R4]bgp 64512
[R4-bgp]router-id 4.4.4.4
[R4-bgp]confederation id 2
[R4-bgp]confederation peer-as 64513
[R4-bgp]peer 172.16.1.1 as-number 64512
[R4-bgp]peer 172.16.1.1 connect-interface LoopBack 0
[R4-bgp]peer 172.16.130.1 as-number 64513
[R4-bgp]peer 172.16.130.1 connect-interface LoopBack 0
[R4-bgp]peer 172.16.130.1 ebgp-max-hop 2
[R5]bgp 64513
[R5-bgp]router-id 5.5.5.5
[R5-bgp]confederation id 2
[R5-bgp]confederation peer-as 64512
[R5-bgp]peer 172.16.0.1 as-number 64512
[R5-bgp]peer 172.16.0.1 connect-interface LoopBack 0
[R5-bgp]peer 172.16.0.1 ebgp-max-hop 2
[R5-bgp]peer 172.16.129.1 as-number 64512
[R5-bgp]peer 172.16.129.1 connect-interface LoopBack 0
[R6]bgp 64513
[R6-bgp]router-id 6.6.6.6
[R6-bgp]confederation id 2
[R6-bgp]peer 172.16.128.1 as-number 64513
[R6-bgp]peer 172.16.128.1 connect-interface LoopBack 0
[R6-bgp]peer 172.16.130.1 as-number 64513
[R6-bgp]peer 172.16.130.1 connect-interface LoopBack 0
[R7]bgp 64513
[R7-bgp]router-id 7.7.7.7
[R7-bgp]confederation id 2
[R7-bgp]confederation peer-as 64512
[R7-bgp]peer 172.16.129.1 as-number 64513
[R7-bgp]peer 172.16.129.1 connect-interface LoopBack 0
[R7-bgp]peer 172.16.2.1 as-number 64512
[R7-bgp]peer 172.16.2.1 connect-interface LoopBack 0
[R7-bgp]peer 172.16.2.1 ebgp-max-hop 2
[R7-bgp]peer 23.1.1.2 as-number 3
[R8]bgp 3
[R8-bgp]router-id 8.8.8.8
[R8-bgp]peer 23.1.1.1 as-number 2
全部运行BGP协议的路由器建邻完成
4.路由配置
[R1]ip route-static 10.1.1.0 255.255.255.0 null 0
[R1]bgp 1
[R1-bgp]network 10.1.1.0 24
[R2]ip route-static 0.0.0.0 0.0.0.0 null 0
[R2]bgp 64512
[R2-bgp]network 172.16.0.0 19
[R2-bgp]peer 172.16.1.1 next-hop-local
[R2-bgp]peer 172.16.128.1 next-hop-local
[R7]ip route-static 0.0.0.0 0.0.0.0 null 0
[R7]bgp 64513
[R7-bgp]network 172.16.0.0 19
[R7-bgp]peer 172.16.2.1 next-hop-local
[R7-bgp]peer 172.16.129.1 next-hop-local
[R8]ip route-static 10.1.2.0 24 null 0
[R8]bgp 3
[R8-bgp]network 10.1.2.0 24
3的路由是优,但是由于三和四都是IBGP,所以R4中没有路由,这里有两种解决办法
(1)
2和4建立BGP邻居
[R2]bgp 64512
[R2-bgp]peer 172.16.2.1 as-number 64512
[R2-bgp]peer 172.16.2.1 connect-interface LoopBack 0
[R2-bgp]peer 172.16.2.1 next-hop-local
[R4]bgp 64512
[R4-bgp]peer 172.16.0.1 as-number 64512
[R4-bgp]peer 172.16.0.1 connect-interface LoopBack 0
5和7建立BGP邻居
[R7]bgp 64513
[R7-bgp]peer 172.16.128.1 as-number 64513
[R7-bgp]peer 172.16.128.1 connect-interface LoopBack 0
[R5]bgp 64513
[R5-bgp]peer 172.16.130.1 as-number 64513
[R5-bgp]peer 172.16.130.1 connect-interface LoopBack 0
[R5-bgp]peer 172.16.130.1 next-hop-local
(2)
让R3和R6成为RR反射器
[R3-bgp]peer 172.16.2.1 reflect-client 让R4成为R3的客户
[R6-bgp]peer 172.16.130.1 reflect-client 让R7成为R5的客户
此时R7和R5上出现环路 (这里出现问题,不知道如何解决)
要使192.168.1.1和192.168.2.1可以通信,要使用tunnel,手写一条静态路由
[R1]int Tunnel 0/0/0
[R1-Tunnel0/0/0]ip add 20.1.1.1 24
[R1-Tunnel0/0/0]tunnel-protocol gre
[R1-Tunnel0/0/0]source 10.1.1.1
[R1-Tunnel0/0/0]destination 10.1.2.1
[R1-Tunnel0/0/0]qu
[R1]ip route-static 192.168.2.0 24 20.1.1.2
[R8]int Tunnel 0/0/0
[R8-Tunnel0/0/0]ip add 20.1.1.2 24
[R8-Tunnel0/0/0]tunnel-protocol gre
[R8-Tunnel0/0/0]source 10.1.2.1
[R8-Tunnel0/0/0]destination 10.1.1.1
[R8-Tunnel0/0/0]qu
[R8]ip route-static 192.168.1.0 255.255.255.0 20.1.1.1