DM8 DSC两节点配置

1.配置共享磁盘

1.1 系统1添加磁盘

1.2 系统2添加磁盘

选择刚创建的磁盘

1.3 配置vm系统

VM需要在两台虚拟机路径下xxx.vmx文件中加入disk.locking = “FALSE“ 参数，否则后启动的虚拟机会启动失败

2. 挂载

1. 在共享磁盘上裸设备划分

1) 输入 fdisk /dev/sdb

2) 依次输入 n  p  1 回车 +100M 回车，完成第一块磁盘划分

3) 依次输入 n  p  2 回车 +100M 回车，完成第二块磁盘划分

4) 依次输入 n  p  3 回车 +2048M 回车，完成第三块磁盘划分

5) 依次输入 n  p  4 回车回车回车，完成第四块磁盘划分

6) 创建/etc/udev/rules.d/60-raw.rules 文件，增加以下语句：

ACTION=="add", KERNEL=="sdb1", RUN+="/bin/raw /dev/raw/raw1 %N"
ACTION=="add", KERNEL=="sdb2", RUN+="/bin/raw /dev/raw/raw2 %N"
ACTION=="add", KERNEL=="sdb3", RUN+="/bin/raw /dev/raw/raw3 %N"
ACTION=="add", KERNEL=="sdb4", RUN+="/bin/raw /dev/raw/raw4 %N"
ACTION=="add", KERNEL=="raw[1-4]", OWNER="dmdba", GROUP="dinstall", MODE="660"

7）两个节点分别执行命令，通知已经划分了分区：

partprobe /dev/sdb

8）在节点DSC0上执行命令，完成裸设备绑定

udevadm trigger --action=add

9）查看裸设备大小

blockdev --getsize64 /dev/raw/raw1

3.DSC配置

1.配置dmdcr_cfg.ini（单节点配置）

DCR_N_GRP = 3
DCR_VTD_PATH = /dev/raw/raw2
DCR_OGUID = 63635
[GRP]
DCR_GRP_TYPE = CSS
DCR_GRP_NAME = GRP_CSS
DCR_GRP_N_EP = 2
DCR_GRP_DSKCHK_CNT = 60
[GRP_CSS]
DCR_EP_NAME = CSS0
DCR_EP_HOST = 192.168.32.138
DCR_EP_PORT = 9341
[GRP_CSS]
DCR_EP_NAME = CSS1
DCR_EP_HOST = 192.168.32.137
DCR_EP_PORT = 9343
[GRP]
DCR_GRP_TYPE = ASM
DCR_GRP_NAME = GRP_ASM
DCR_GRP_N_EP = 2
DCR_GRP_DSKCHK_CNT = 60
[GRP_ASM]
DCR_EP_NAME = ASM0
DCR_EP_SHM_KEY = 93360
DCR_EP_SHM_SIZE = 10
DCR_EP_HOST = 192.168.32.138
DCR_EP_PORT = 9349
DCR_EP_ASM_LOAD_PATH = /dev/raw
[GRP_ASM]
DCR_EP_NAME = ASM1
DCR_EP_SHM_KEY = 93361
DCR_EP_SHM_SIZE = 10
DCR_EP_HOST = 192.168.32.137
DCR_EP_PORT = 9351
DCR_EP_ASM_LOAD_PATH = /dev/raw
[GRP]
DCR_GRP_TYPE = DB
DCR_GRP_NAME = GRP_DSC
DCR_GRP_N_EP = 2
DCR_GRP_DSKCHK_CNT = 60
[GRP_DSC]
DCR_EP_NAME = DSC0
DCR_EP_SEQNO = 0
DCR_EP_PORT = 5236
DCR_CHECK_PORT = 9741
[GRP_DSC]
DCR_EP_NAME = DSC1
DCR_EP_SEQNO = 1
DCR_EP_PORT = 5236
DCR_CHECK_PORT = 9742

2.使用 DMASMCMD 工具初始化（单节点配置）

bin目录下dmasmcmd工具逐条执行

create dcrdisk '/dev/raw/raw1' 'dcr'
create votedisk '/dev/raw/raw2' 'vote'
create asmdisk '/dev/raw/raw3' 'LOG0'
create asmdisk '/dev/raw/raw4' 'DATA0'
init dcrdisk '/dev/raw/raw1' from '/home/data/dmdcr_cfg.ini'identified by 'abcd'
init votedisk '/dev/raw/raw2' from '/home/data/dmdcr_cfg.ini'

3.配置dmasvrmal.ini（两节点配置）

两节点配置一样

[MAL_INST1]
 MAL_INST_NAME = ASM0
 MAL_HOST = 192.168.32.138
 MAL_PORT = 7236
[MAL_INST2]
 MAL_INST_NAME = ASM1
 MAL_HOST = 192.168.32.137
 MAL_PORT = 7237

4.配置dmdcr.ini（两节点配置）

节点一

DMDCR_PATH = /dev/raw/raw1
DMDCR_MAL_PATH =/home/dmdba/dmdbms/data/dmasvrmal.ini
DMDCR_SEQNO = 0
DMDCR_ASM_RESTART_INTERVAL = 0
DMDCR_ASM_STARTUP_CMD = /home/dmdba/dmdbms/bin/dmasmsvr dcr_ini=/home/dmdba/dmdbms/data/dmdcr.ini
DMDCR_DB_RESTART_INTERVAL = 0
DMDCR_DB_STARTUP_CMD = /home/dmdba/dmdbms/bin/dmserver path=/home/dmdba/dmdbms/data/dsc0_config/dm.ini dcr_ini=/home/dmdba/dmdbms/data/dmdcr.ini

节点二

DMDCR_PATH = /dev/raw/raw1
DMDCR_MAL_PATH =/home/dmdba/dmdbms/data/dmasvrmal.ini
DMDCR_SEQNO = 1
DMDCR_ASM_RESTART_INTERVAL = 0
DMDCR_ASM_STARTUP_CMD = /home/dmdba/dmdbms/bin/dmasmsvr dcr_ini=//home/dmdba/dmdbms/data/dmdcr.ini
DMDCR_DB_RESTART_INTERVAL = 0
DMDCR_DB_STARTUP_CMD = /home/dmdba/dmdbms/bin/dmserver path=/home/dmdba/dmdbms/data/dsc1_config/dm.ini dcr_ini=/home/dmdba/dmdbms/data/dmdcr.ini

5.启动 DMCSS、DMASM 服务程序（两节点配置）

注意关闭防火墙 执行顺序节点一DMCSS 节点二DMCSS节点一DMASM 节点二DMASM

#关闭防火墙
sudo systemctl stop firewalld
./dmcss DCR_INI=/home/dmdba/dmdbms/data/dmdcr.ini
./dmasmsvr DCR_INI=/home/dmdba/dmdbms/data/dmdcr.ini

6.使用 dmasmtool 工具创建 DMASM 磁盘组

./dmasmtool DCR_INI=/home/dmdba/dmdbms/data/dmdcr.ini
#创建日志磁盘组
create diskgroup 'DMLOG' asmdisk '/dev/raw/raw3'
#创建数据磁盘组
create diskgroup 'DMDATA' asmdisk '/dev/raw/

7.配置dminit.ini（单节点配置）

db_name = dsc
system_path = +DMDATA/data

system = +DMDATA/data/dsc/system.dbf
system_size = 128
roll = +DMDATA/data/dsc/roll.dbf
roll_size = 128
main = +DMDATA/data/dsc/main.dbf
main_size = 128
ctl_path = +DMDATA/data/dsc/dm.ctl
ctl_size = 8
log_size = 256
dcr_path = /dev/raw/raw1 #dcr 磁盘路径，目前不支持 asm，只能是裸设备
dcr_seqno = 0
auto_overwrite = 1
[DSC0] #inst_name 跟 dmdcr_cfg.ini 中 DB 类型 group 中 DCR_EP_NAME 对应
config_path = /home/data/dsc0_config
port_num = 5236
mal_host = 192.168.32.138
mal_port = 9340
log_path = +DMLOG/log/dsc0_log01.log
log_path = +DMLOG/log/dsc0_log02.log
[DSC1] #inst_name 跟 dmdcr_cfg.ini 中 DB 类型 group 中 DCR_EP_NAME 对应
config_path = /home/data/dsc1_config
port_num = 5237
mal_host = 192.168.32.137
mal_port = 9341
log_path = +DMLOG/log/dsc1_log01.log
log_path = +DMLOG/log/dsc1_log02.log

8.使用 dminit 初始化 DB 环境

#先给权限
mkdir /home/data
chown -R dmdba:dinstall /home/data

 ./dminit control=/home/dmdba/dmdbms/data/dminit.ini

9.启动数据库

./dmserver /home/data/dsc0_config/dm.ini dcr_ini=/home/dmdba/dmdbms/data/dmdcr.ini
./dmserver /home/data/dsc1_config/dm.ini dcr_ini=/home/dmdba/dmdbms/data/dmdcr.ini

10.关dsc集群顺序

关闭实例>关闭asm>关闭css

11.开dsc集群方式

启动css>启动asm>启动实例

12.配置监视器

#和 dmdcr_cfg.ini 中的 DCR_OGUID 保持一致
CSSM_OGUID = 63635
#配置所有 CSS 的连接信息，
#和 dmdcr_cfg.ini 中 CSS 配置项的 DCR_EP_HOST 和 DCR_EP_PORT 保持一致
CSSM_CSS_IP = 192.168.32.138:9341
CSSM_CSS_IP = 192.168.32.137:9343
CSSM_LOG_PATH =D:\DMDataBase\data\cssm\log #监视器日志文件存放路径
CSSM_LOG_FILE_SIZE = 32 #每个日志文件最大 32M
CSSM_LOG_SPACE_LIMIT = 0 #不限定日志文件总占用空间

dmcssm.exe INI_PATH=D:\DMDataBase\data\cssm\dmcssm.ini