树莓派中安装QT
本文博客链接:http://blog.csdn.net/jdh99,作者:jdh,转载请注明.
环境:
主机:WIN7
硬件:树莓派
步骤:
参考链接:http://qt-project.org/wiki/apt-get_Qt4_on_the_Raspberry_Pi
Firstly I got the development tools needed by Qt Creator in the hope it would be less heavy for the Pi to download separately.
-
sudo apt-get install qt4-dev-tools
Then I went for Qt Creator
-
sudo apt-get install Qtcreator
I also installed
-
sudo apt-get install gcc
-
sudo apt-get install xterm
-
sudo apt-get install git-core
-
sudo apt-get install subversion
this gives as a result Qt Creator 2.5 with Qt 4.8.1 32 bit
如果出现问题:e: unable to locate package qt creator,则输入以下命令更新
sudo apt-get update && sudo apt-get upgrade
如果还是有问题,尝试sudo apt-get install qtcreator
![](https://i-blog.csdnimg.cn/blog_migrate/dd730548801648baef45178c16581511.png)
Problem : no toolchain.
We can only compile for remote embedded devices and this is not the case here, because we are on the Pi and not remotely accessing it.
I added a gcc toolchain
Options > build & run > tab tool chain > button add
Choose GCC
- Then set compiler path : /usr/bin/arm-linux-gnueabihf-gcc-4.6
- Debugger : /usr/bin/gdb
- Mkspec : default
Qt Creator seems to detect that we are going to deploy on a remote target.
To fix this :
- Go to menu help > about plugins
- Uncheck device support > remote linux
- Restart Qt Creator
- Go to tools > options TAB > build & run > Qt versions > add “/usr/bin/qmake-qt4”
It will then show up as a desktop project in the project wizard instead of embedded.
![](https://i-blog.csdnimg.cn/blog_migrate/3650fef38ff2e275fcfc9544c68c4ae6.png)